hey people ! i have been not around recently cos i have finally achieved sth -.- sth very small.. lol..

i over clocked my 7850BE to 3.3ghz.. finally after so many trial and error.. kinda satisfied now..

http://valid.canardpc.com/show_oc.php?id=561598

take a look. thanks peeps !

The hsf is depends on your budget. Tell us so we can give you some recommendation

Seriously, the TMPIN 1 and 3 gone haywire...where does this TMPIN located, mobo or proc...I got to send either one for replacement or RMA lar like this...

TMPIN 1 is stuck at 45 no matter what and TMPIN 3 has a maximum of only 60...

During my last Priming session I noticed the temps weren't moving even after I stop prime nearly 1 hour and manually touched heatsink both Proc and Northbridge which clearly indicates that if the TMPIN readings were to be true, my finger didn't felt any excessive hear at all...

And during Priming the temps readings on TMPIN 1 and 3 are both non-reflect the temps of the Proc and NB which I also manually touch and feel....

Another thing when I enable in Bios regarding temp shutdown at 75c....my PC shuts off even when the readings in HWMonitor and Overdrive during priming never showed 75c 

Looking something like me??

Here are some ideas....


The one I'm eyeing....the airflow direction is perfect...some heatsinks blow above not suitable since the right direction for TA970GX type mobo is blowing towards the mosfets...


Original link:---> http://www.rebelshavenforum.com/sis-bin/ul...45;t=000081;p=2

Got CCF, AC Extreme, Xigmatek...So many to choose from.

For stock hsf, I got 5*C @ full load.

Can anyone tell me the temperature reading in the red box referring to which part of my mobo?is it pwm?Im pretty sure the 2 readings below the red box is for CPU n mobo

btw im using biostar ta780g m2+

State your budget, prefer tower heatsink or what? Size?

3dmark06 with everything maxed out...abit dissapointed
[attachmentid=987935]

for 3Ghz u dun need to adjust the vCore.
default is enuf edi.

i think my 9800gt and 7750BE are bottlonecking each other!

3dmark06 had 8.6k++ only with full test @ 1600x900 with smth like 4 AA and anstrophic

If that 3.1Ghz result is stable at that vcore...all hats of to u...nice chippie...

The temp is it in A/C room?

what cooler ur usin... w/ that kinda voltage it shouldn't be so high... 

Humm..Tried occt?

and try run prime95 for atleast 1 hour..

According to the AM3 OC guide as posted by a forumer just a moment ago, you should let it run for at least 3 hours because AM3 CPUs will stress the most at around 2 hours.

but the limit temp for proc seems low..
940BE max temp 62C..

bila nk tukar proc AMDAthlon??

i guess both the same...both is ur proc temp.. isit the proc surface temp? correct me if im wrong
i tried with x9 and 310htt... cant go any further..the vcore also not so attractive.. nvr tried with x8... pls note that my proc is ancient edi
(not really ancient, but compared to u all here, im too dem ancient that shud be extinct/vanished my yesterday)

x10 with 220 on my old mobo...Maybe friday night will try 7750 on Asus mobo

haha why nvr buy 7850 ? u buyin the black version ryte.. i wanna know the result from the oc ya bro xD

how delete them o.O

---

Added on June 3, 2009, 11:17 pmwa suddenly everybody so quiet one o.O lol

http://forum.lowyat.net/topic/1036141

this desktop gaming ram okay ah.. feel like buying..