sis verdict...my board cant handle 1hr prime test la with sucha a high vcore..haish..
will run a lower vcore = lower cpu speed...
3.6 x2 acceptable? hehehe..stock vcore only.

wait for me to buy a tim 1st..then ill post.wakakakka..

---

Added on July 4, 2009, 10:59 pm
- Phenom II x2 550be
- Revision : RB-C2
- batch : cacyc ac 0922apmw
- Max CPU clock speed : 3600Mhz (200 x 18)
- CPU voltage : 1.344v
- Motherboard used : biostar ta790gx 128
- Type of cooling :ac 64 freezer pro w/o TIM
-nb freq = 2000mhz
- nb volt =tba

anyting?

This post has been edited by kuntawakaw: Jul 6 2009, 09:17 PM

this can be put at suicide? i dont dare to prime it.. prime sure fail..if prime stable volt is feed,sure my board will fail..

- Phenom II x2 550be
- Revision : RB-C2
- batch : cacyc ac 0922apmw
- Max CPU clock speed : 3600Mhz (200 x 18)
- CPU voltage : 1.296v
- Motherboard used : biostar ta790gx 128
- Type of cooling :ac 64 freezer pro
- nb freq = 2200mhz
- nb volt =i donno where to check la..and also donno where to set

verdict..
my suicide run is on x4 mode... go go go...go correct the database

updated a new one..and tonight also will come a new record..


- Phenom II x2 550be
- Revision : RB-C2
- batch : cacyc ac 0922apmw
- Max CPU clock speed : (254x14.5) 3.654
- CPU voltage : 1.328
- Motherboard used : biostar ta790gx 128
- Type of cooling :ac 64 freezer pro
- nb freq = 2540.4mhz
- nb volt =tba

and verdict..change my suicide mode also..ot getting faster

Phenom II x4 550be
- Revision : RB-C2
- batch : cacyc ac 0922apmw
- Max CPU clock speed : (253x15.5) 3.921ghz
- CPU voltage : 1.440v
- Motherboard used : biostar ta790gx 128
- Type of cooling :ac 64 freezer pro
- nb freq = 2530.4mhz
- nb volt =tba

This post has been edited by kuntawakaw: Jul 14 2009, 10:59 PM

thanks..but i have a stable 3.8ghz run...but the memory tab didnt snap along..can i put it here also?
the nb freq and the ht link is the same..pls .....
just notice that my nb-cpu and proc volt is the same...at every setting..


- Phenom II x2 550be
- Revision : RB-C2
- batch : cacyc ac 0922apmw
- Max CPU clock speed : (245x15.5) 3.801Ghz (taken when fluctuate..the exact amount shud be 5mhz lower )
- CPU voltage : 1.392v
- Motherboard used : biostar ta790gx 128
- Type of cooling :ac 64 freezer pro
- nb freq = 1962mhz
- nb volt =1.392v

this is my last max oc verdict..i swear...u dont have to update the database everyday afterthis..huhuhuh
since now more on low vcore..
thanks

This post has been edited by kuntawakaw: Jul 16 2009, 08:08 AM

yeah..thats the final for x2..last time i tot 3.6 is the last but when i enhance the cooling, so i make a new one..sorry

and later will make oc result for x4..i hope it not trouble u since x4 and x2 result is different right? but not too soon..mebbe nxt week or nxt month..sorry

great vcore there..mind if i ask
the worker thread, set at 2 or 4?