wow..new thread already...nice
tried increased vcore in bios to 1.4V in bios..
but at CPUZ shows 1.45V like tat..
temp around 45 at idle..

much more stable at 3.125Ghz..tried 3.25Ghz..kenot complete super PI 1M
stable maximum at 255Mhz bus speed..about 3.18GHz...
i found out tat nvidia chipset dun like high HTT speed..had to lower HTT multiplier to 3x to get stable..

my config
Processor : AMD athlon x2 4800+ brisbane G2 @ 3.18Ghz @ 1.4V
Board: XFX 750a SLI
Ram: 2X 2GB kingston value ram 800Mhz @ 796Mhz 5-5-5-18 2T


screen shot

haha..bought new chipset cooler...deepcool Nbridge 8...

originally my chipset never falls below 50degree (nvidia chipset mah..)

now its running 48degree under heavy load...idle temp, 45...





so..does it improve my OC result?? yup..sure..haha




3.24Ghz now..but still not very stable..
had to up vcore and chipset voltage...

u go calculate loh..P=VI
haha
higher ampere on 12V rail better if u use GC tat need high power

ST50F user here..haha...so far so good..love it have so many sata and molex connector..
used it on 9800GT before..but keep on hang..dunno due to high temp or my power supply not enuf power...

theoretically yup..since the 12V rail can take more current...
12VX20A=240w per rail

in ST50F
12 X 18 = 216W per rail..

Dunno about AcBel..but silverstone does deliver 80% efficientcy at tat max load..500WATT...u can refer to tis review
ST50F review

problem is it has 2 X PCI E 6pin both connect to second rail...which means 2 plug, but total can handle 216watt only..
But factor in 75 watt supplied from PCI E slot actually can support up to 291watt graphic card..
for processor i think nothing to be worry about..haha..since max also 140 watt only..unleast u wan Vmod it

the Vcore so high..1.71.

haha..dun worry..cdlim87 busy with exam now..so its chance for u all to over take him dee

955 is it BE??

3.2Ghz clock...nice..must be great for OCing

yaya...X2 cheap cheap...burnt also tak rasa sangat...oc without worries..

955 stock clock is 3.2...200mhz more than 940..just read the review..
Max ram support till 1333mhz speed only..
compare with intel..can go till 1800mhz and beyond...

not comparing man...
from review at toms hardware, there is a function in new overdrive tat call BEMP
turn it on u overclock ur NB tat unlock the full power of 1333mhz ram...
y they dont on it by default?? tis means tat at default, 1333mhz ram actually running at 1000mhz speed..dunno if its real or not...
Any one get a 955 already?? how was it??