Apr 1 2009, 02:17 AM, updated 4y ago
KEY FEATURES
TTL FLASH
now with 2 year malaysia warranty plus free firmware upgrade by local distributor(grey import set will be charge RM150)
the latest firmware will enable you to use your flash with the china trigger
Di622 is compatible with Canon's E-TTL, E-TTLII system, and Nikon's i-TTL system.
Those new digital TTL flash systems control the flash light with greater precision and stability.
POWER ZOOM & TURNING FLASH HEAD
The light distribution angle is automatically adjusted for the lens focal length. A high quality stepping motor sharply traces the lens movement with the same speed as that of the camera manufacturer's original flash model.
BOUNCE FLASH
BOUNCE FLASHThe flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to 70mm of the digital lens.(*) For a longer lens, the flash head reflector position stays at 70mm.
It turns 90 degrees upward and 270 degrees horizontally for bounce lighting.
The flash head also stores a small reflection panel for fill-in shots.
(*) The focal length for the traditional SLR camera is to be multiplied b a factor of 1.5.
OFF CAMERA FLASH
The Di622 has a special photo sensor built-in.
Place the Di622 off camera and the flash will synchronize with the master flash placed on your camera. This wireless remote flash system is called slave flash technology and is often used for a creative lighting efficiency.
Use the camera's built in flash, the camera manufacture's original flash or the Di622 as the master flash. Place one or more Di622 flash units away from the camera.
The sensor circuitry of Di622 is compatible only with the latest pre-flash TTL system offered by Canon or Nikon
The Di622 is not compatible with traditional flash systems or studio flash systems.
MORE
Energy saving system
The Di622 has a dual energy saving system.
It automatically enters sleep mode when it's not in use for 5 min., and is reset with a touch of the shutter button or any button of the flash.
If the unit is not in use for 30 minutes, it will automatically power off.
With the flash unit set for slave mode, sleep mode is cancelled and the unit will not automatically turn off until 60 minutes have elapsed.
The Di622 is compatible with two types of cameras, Canon and Nikon.
[for Canon]
The Di622 Canon model is compatible with the following Canon digital SLR cameras and the top end compact cameras.
EOS 5D / 10D / 20D / 30D / 40D / 50D
EOS 300D / 350D / 400D / 450D / 1000D / Digital RebelX / XT / XTi / XSi
Powershot G7 / G9 / G10 / S5IS / SX10 IS* /
* G.No. drops at the lens focal distance of 300mm (35mm format equivalent) or longer.
[for Nikon]
The Di622 Nikon model is compatible with the following Nikon digital SLR cameras
D3X / D3 / D700 / D300 / D200 / D90 / D80 / D70S / D70 / D60 / D50 / D40X / D40
Click Here To Ask Me A Question or Pricing thanks!!!!
MALAYSIA SET With 2 Year Warranty available!!!!!!
This post has been edited by mitmivec: Sep 24 2013, 05:49 PM
Quote
0.1773sec
0.48
5 queries
GZIP Disabled