Just want to share with the latest firmware Firmware Version: 1.01.09 (01) for Linksys WAG200G.

Firmware download : http://linksysdownloads.googlepages.com/WA...ML-1.01.090.img

How to : http://linksysfirmwares.googlepages.com/upgradingfirmware

Things to consider b4 u update.
1. U know what u r doing
2. use at your own risk
3. Thread stater do not responsibility any faulty on your device.

Thanks sharing. Updating now

Interesting... hopefully, the developers of this unofficial firmwares don't create a hidden botnet daemon or accidentally breaks its router security like in the following link

http://it.slashdot.org/article.pl?sid=09/03/23/2257252

This post has been edited by eclectice: Mar 25 2009, 06:43 PM

A firmware update still makes the router a POS.

Been having line dropping issues whenever torrent downloads are on. From 1.01.06 to 1.01.08(03) to now.
I left the router in the drawer for 2 months and suddenly the POS works again. Overheating maybe?
The worse router to get from Linksys.

OT: In fact, I had a lab session using a WRT54G2 in Uni and one of the units need to be reset everytime it restarts. Pain in the arse.

Still, the hardware in the WRT54GL is cool to flash with a 3rd party firmware

question here... after i upgrade to ver 1.01.09, sometimes when i hard boot the modem, under the STATUS > DSL CONNECTION > DSL Status ( always show connecting and doesnt show negotiating althought i keep refreshing for few times), unless i soft boot again, then only connecting +negotiatting appear )

get wat i mean??? does this happen to u guys?? or just me????

haih.. kinda regret to buy this damn bloody modem

I've been using this router for almost 2 years and didnt bring me any trouble...still using 1.01.05 firmware..

download from rapidshare using free user max speed 180 - 190kb..

hey guys !

im using this modem for months and found that it disconnect very often when watching ppstream or P2P/ torrent !!! wonder what happen???

any ultimate way to solve my issue ? im using streamyx 1mb (now at 1.01.05 Firmware)

DSL Status: Connected
DSL Modulation Mode: MultiMode
DSL Path Mode: Interleaved
Downstream Rate: 1024 kbps
Upstream Rate: 384 kbps
Downstream Margin: 31 db
Upstream Margin: 10 db
Downstream Line Attenuation: 17 db
Upstream Line Attenuation: 5 db
Downstream Transmit Power: 6 db
Upstream Transmit Power: 12 db
Encapsulation: RFC 2516 PPPoE
Multiplexing: LLC
Qos: UBR
Pcr Rate: 0
Scr Rate: 0
Autodetect: Disable
VPI: 0
VCI: 35
Enable: Yes
PVC Status: Up

Im using this model and my firmware is 1.01.05 firmware, been having problem as well, im using a 512mb line and these few days my dl speed is less than 10kbps and it gets frequent time-out when downloading. Pretty sad

I also having problem ...looking for other modem to replace this

I had similar problem before. It solved when the firmware was upgraded to 1.01.06

This Linksys WAG200G got very very good wireless signal..
Can reach 100M from my house. still got signal.

It is true these router can exceed radius 100M, just keep away from Interference, thats it.

Before continue firmware update...
a) The firmware 1.01.09 is officially released for WAG200G.
b) This firmware is only for usage in Europe with WAG200G Annex A hardware.

after updating to 1.01.09, the version number on the top right side is still showing the old firmware number that is 1.01.06

why ?

Are you sure you do firmware with version 1.01.09 ?
Because after upgrade firmware, it should shows latest version...

thanks anyway for the reply but i have solved the problem.

Hows your problem solved?

i update oledy but i tot i update it will have new setting but it see same =( ...because i wan to try to set up low speed for wireless speed...i still see it at 12Mbps ==".. could anyone teach me how to do setting? cause i wan fainted to see the words on the setting =="""" dont understanding those words meaning....lolx..

It would be more helpful if you could explain a little bit more further.

If you are looking to decrease the speed of your Wi-Fi transmission, try changing the Wireless Mode to something like 'B', which runs at 11Mbps.

I don't think anything lower than that is applicable in most Access Points these days...

Hope this helps! Cheers!

How do u guys see if the hardware is Annex A or B?

Wish this devices support dd-wrt