Useful Links for LC Owners :

King Of Moped (KOM) 135
Yamaha T135
Malaysian Bikers Community MBC)

LYN 135LC Club V1


Our Proud Ride!!


1. Spayz's ride :

2. xtreme_paranoid's ride :

3. charge-n-go's ride :

4. Are_keem's ride :

5. scoffer's ride :

6. kinwei3250's ride :

7. LilCroSs's ride :

8. samba18's ride :


Whose name is not in the list, kindly PM me your model or just post in the thread.
Common guys, let show them the power of liquid cooling

This post has been edited by Are_keem: Jul 28 2009, 07:02 PM

Tips to Improve Engine Performance

Minor mod (increase acceleration)
1. Remove air filter. (Penang people can find me, FOC)
2. Reset carburetor air-fuel setting. (Penang people can find me, FOC)
3. Set valve tapette to 10 IN and 15 OUT. - RM30 labour charge @ New Bee Hock motor, Penang.
4. Change to 15-40 with 415 chain. - RM100

Major mod
coming soon...


Tips to Improve Handling Performance
coming soon...


Sprocket Combination (Stock CDI)

acceleration + = increase by xx%
acceleration - = decrease by xx%

15-35 - 1st : 48kph, 2nd : 90kph, 3rd : 130kph, 4th : 180kph; acceleration - 10.0%
15-36 - 1st : 46kph, 2nd : 86kph, 3rd : 125kph, 4th : 175kph; acceleration - 7.8%
15-37 - 1st : 44kph, 2nd : 83kph, 3rd : 122kph, 4th : 169kph; acceleration - 5.1%
15-38 - 1st : 43kph, 2nd : 80kph, 3rd : 118kph, 4th : 160kph; acceleration - 2.6%

15-39 - 1st : 42kph, 2nd : 78kph, 3rd : 115kph, 4th : 155kph; acceleration no change

15-40 - 1st : 41kph, 2nd : 75kph, 3rd : 111kph, 4th : 151kph; acceleration + 2.6%
15-41 - 1st : 40kph, 2nd : 73kph, 3rd : 108kph, 4th : 148kph; acceleration + 5.1%
15-42 - 1st : 39kph, 2nd : 71kph, 3rd : 105kph, 4th : 144kph; acceleration + 7.8%
15-43 - 1st : 38kph, 2nd : 69kph, 3rd : 102kph, 4th : 140kph; acceleration + 10.0%

After changing racing CDI >> top speed for 4th gear can add about 10 - 20kph.

*Note* The above data is an estimation of potential top speed for each gear, and may vary from bike to bike.


Carburetor General Tuning Guideline:

A. Change the idle air-fuel mixture setting 1st.
B. If still not satisfied, change the needle position.
C. If none of the needle position is good, change the jettings.


A. Idle air-fuel mixture settings
1. Air screw set at about 2.5 turns for stock airflow. Modified exhaust + air filterless can use 2 turns.
2. Idle rpm increase a little more than normal.

B. Needle setting
1. There are 3 ticks on the needle jet.
2. The lowest tick will give us good FC, as it limits more petrol to flow from mainjet @ half throttle
3. The highest tick will give us bad FC, as it let more petrol flows from mainjet @ half throttle.

However, highest tick does not mean best acceleration. If too much petrol flows into the venturi, the mixture will become too rich. This will decrease the power at high rpm. So, try different needle clip position and feel which one has the best results.

C. Jet size setting
1. Change mainjet to #107.5 (stock #105)
2. Change pilotjet to #22.5 (stock #20). If there is no performance increase, then stick back to #20.
3. Change mainjet to #110 + pilotjet #22.5. <-- this should be a good pair.

Anything more than #110 mainjet will make the engine feels heavy, bcoz the mixture becomes too rich.


Disc Brake Tuning Meteorology

The theory covers the relationship between the total areas of the brake pots (Note, its area not count), brake pads, masterpump, the rigidity of the brake hose and the property of the brake pads. The point of improvement is to look for the limit of the system and upgrade it.

1. Single pot is less prone to uneven brake force compared to multiple pots when in case one of the pot jams.

2. Changing the brake rotor is a start. But if you do not see improvements, that means rotor is not the limitation, and you need to change other things to do a stopee (Nose brake).

3. Change brake hose to steel braided, so it is less likely to expand and eat up the brake budget. Try this, wrap ur hands around standard brake hose, and press the brake you will feel it expand. Anymore you press also won't increase braking performance.

4. Change to DOT5 brake oil (normal 1 can, but easily overheat. I go hill run for >1 hr, DOT5 is mandatory)

5. Change brake pads, I use Ferodo imported by Racing Boy. Ask for original ones, one set front about RM30~40. You can see more copper strands on the pads. Other good pads use metal strands so u can see silverly metal strands.

6. Must stiffen front fork absorber, and add a stabilizer bar. Use 15W-20 fork oil, make it about 25% stiffer than stock. 20W-50 fork oil is too stiff bcoz (the oil is too not lean enuf), the bound and rebound SUX, I feel like riding on a horse. The traction sux too, bcoz front tyre can hardly grip on the road when going through uneven road (esp penang road).

7. Use ABS device (about RM100) <-- optional

** many thanks to bro charge-n-go and bro alexei for the useful tips
stay tune for more tips

p/s : if anybody wanna share their modding tips too, you can PM me or just post in the thread, and I will update this post

This post has been edited by Are_keem: Jun 2 2009, 03:47 PM

can add my name in list? im using 135lc black n white ss i buy it on 3 may 2008.

here i am to support.

wah
v2 de
gratz
miss my old 135lc

that exhaust...
so far so good lor... ori spec change to Nob1 'ONLY' top speed 150km/h (on straight road long 1.5KM++)

My LC : Black Gold
ES
9 Mar 2009
Kelantan

This post has been edited by kinwei3250: May 16 2009, 09:29 AM

reporting...

add my name too!

wah lau eh, ONLY!
last time how fast you go?

whoooooooo V2!!!

make it 10 ba bro are_keem
add me into d list
check ur pm

hahaha.. your name already up there

guys, I've updated the list above.
if there's other left, kindly post here or just PM me

reporting in

radio_8888 | Selangor | SS - Black Orange | November 2008

wanna join too


maniacs | Selangor/klang | SS - Orange white | february 09

here i come

petaiman | peanang | SS - black gold | march 09

Uncle Cheang reporting

DragonK my top speed only around 140km/h
How about yours?

heu.... got ahm sp for sale....

only rm125.... still new... using only 1 week

cant tahan the noisy pomm pomm la....

halo....all!
im in here nw!

i am here in V2~!!:D currently my bike stock already. no nob1 anymore, aiming for other exhaust...

Please add me to the club!!!

jcliew | johor | SS - black | march 09

will post pics of my bike later on