yeah..tower case look nicer than cube one IMO

damn...

me want one.

Been looking for the ideal case for my htpc last time until I decided on Antec ISK 300-150. But there's no seller bringing the model here. I currently have SG05 & CM Elite 130 so looking for something much smaller.

Anyone have info on this case?

The newer version came with USB3.

I just fall in love with this case

I will just leave this here

I'm patiently waiting for the Corsair 380T to replace my cooler master elite 120.



Hoping that my 2.5 slot Gainward GTX 770 phantom wont get in the way like my current rig.

[attachmentid=4064805]

Because of that and the handle is a definite plus for me and it would be easier to transport.

But I'm also considering the Silverstone RVZ01 but if I opt for this case, cable management is definitely a tight fit because I wanna keep using my 140mm 550watt 80+ gold power supply from silverstone & my Gainward GTX 770.

As promised here are the pictures of my build

All 4 angles of the casing
[attachmentid=4090133][attachmentid=4090134]
[attachmentid=4090135][attachmentid=4090136]

Size comparison with XBOX360, small yet powerful enough. No problem fitting in an i7 with GTX780. My budget not allowed 
[attachmentid=4090138][attachmentid=4090139]
[attachmentid=4090140][attachmentid=4090141]

CPU side with magnetic dust filter FF123 attached. All fans are intake, my setup is positive pressure, the excess heat will be pushed out through the top and back of the casing vent.
[attachmentid=4090142]

Graphics side with dust filter attached (Noctua fans color are brown sadly not black    )
[attachmentid=4090143]

Without the filter
[attachmentid=4090144]

With the side panel opened, Enermax TB silence at CPU side controlled by mobo PWM. SSD moved near the HDD due to heat emitted from the graphics. Dont wana have premature SSD death 
[attachmentid=4090145][attachmentid=4090146]

Scythe big shuriken 2. The fan can get a little noisy under load. As you can see, the height clearance is pretty good and able to fit in another 25mm thick fan, provided you stick with stock shuriken fan 
[attachmentid=4090147]

PCIE riser removed from mobo. (Total 6 screws to be removed)
[attachmentid=4090148]

Big shuriken 2 height, able to clear off the components below. I'm using normal ram (not low profile). Ram with heat spreaders may have clearance issue on bank0 hitting the heatpipe
[attachmentid=4090149]

ASUS GTX760 attached to the PCIE riser adapter. You see there is no problem fitting a longer card like a GTX780
[attachmentid=4090150][attachmentid=4090152]

Ultra fine mesh magnetic dust filter FF123
[attachmentid=4090153]

GPU side removed, showing Noctua NF-P12
[attachmentid=4090154]

And final one on my desk with 23" monitor
[attachmentid=4090155]

ODD is sold seperately. If not mistaken it's a standard mount which is the same for laptops.