Planning to get Cooler Master Elite 130
Anyone got experience with it?

Im using Elite 120..not that bad..

Cooler Master Elite 130 is a updated version with more usb 3.0

its pretty much the same..but on 130 u have 2 usb3 instead of 1.hdd cage have been remove too

Hi, want to ask... for light usage such as office, download and internet, customize build mini itx or intel nuc better?

Which one cheaper?

both also no problem. build customize mini itx cheaper.

Intel nuc much smaller than customize mini itx right?

you're right. the main drawback for me is just limit to mSATA storage. cannot add more 2.5"/3.5" hdd...

your information is outdate.

http://www.intel.com/content/www/us/en/nuc...d54250wykh.html

There are total 3 model support 2.5" SSD/HDD now.. Haswell Core i3, i5 and Bay Trail Celeron.

Coming in March there will be model that support VGA Port...but its on ATOM processor, inbuilt 4GB storage too

oh... new Generation Intel NUC Models. now I see many NUCs and 3 of them can support 2.5" hdd/ssd. more choice. but still little more expensive than custom itx build, unless Intel dropping the price on this coming March.


This post has been edited by djlah: Feb 3 2014, 09:39 AM

but Intel NUC kinda expensive

Any recommendations for high airflow slim 120 and 92mm fans? Got a rather tiny SFF case to take care of.

is anyone use CoolerMaster Elite 110?
wanna build Hackintosh mini there..
can i put any hydro cooler there?

Good afternoon

I'm interested with the cfi mini itx casing which running 150w power supply. Do u still carrying the item now??

u asking who bro?

I could only think of Scythe 120mm slim and one from Akasa with the former easier to find... but you're probably out of luck with the 92mm... even the 25mm variant are hard to come by compared to the 80mm type

you can but I think you are limited to slim 120mm rad on that one



erm.. this isn't a sales thread and we have no idea who are you asking

new chick in da haus.



This post has been edited by irienaoki: Feb 11 2014, 06:12 PM

Hi guys,

I'm noob in SFF. Got few questions

1) The Mobo, normally the model number end with mitx? Having hardtime to identify mitx mobo just by browsing the mobo list
2) Can i put 2.5" hdd replace 3.5" ?
3) PSU doesn't require too high right? Planning to get build in Graphic.

1- if you're looking at pricelists the shop usually states the form factor beside if it's an ITX mobo
2- yes you may, no problems with that
3- if just using IGP then a low powered PSU is good enough, but no matter what, get a reliable unit

where display/offered the most choise for mATX casing in KL ?