recently i bought my 1st lian li.
i end up with a lian li v600 and had to carry all the way from ate low yat to my home in perak by bus.







after keeping it for month without using it, i plan to mod it.

This post has been edited by tjay_tj: Apr 9 2015, 05:45 PM

woah..u went all the way to lowyat and bought the casing and went back to perak by bus?..wooshh

This post has been edited by Jinster: Mar 20 2009, 06:15 PM

yup.

went crazy after kena racun from the lian li thread.
____________________________________________________________________

more update

get these stuff after searching for long long time.
it is so hard to find these things in malaysia





time for the work to get started

gonna fit wc set inside it? 3x120 rads? waoh..thats gonna be cool..its been my dream to fit wc set into my v600..but still no money..

This post has been edited by renesisx: Mar 20 2009, 08:03 PM

alu casing very cantik. how much u bought ?

i have the same problem with you...
haha... but some fan will do

i bought the case at ate low yat. RM390.

where did u get those?

well it is quite hard to get rad grillz in malaysia, i get it in sg.
the rtx i get in ace hardware in kl. hard to get if u are not in kl.

i saw the tool at acehardware too lols..
but the grill
yea..it's very hard to get unless u make ur own haha

i try to make one before. even with the rtx, it is almost impossible.

update is coming soon.

tjay_tj please jaga my ah lian elok²...ekekeke...

You bought it from ATE shop aite...sure people over there at ATE poison you gao-gao...

Bring it back to your hometown sure is a long² and un forgetful journey...

This post has been edited by verdict: Mar 22 2009, 04:14 AM

sure no problem

update





marked





This post has been edited by tjay_tj: Apr 7 2009, 10:10 PM

oh my..acrylic top! i foresee that it is gonna look nice ^^

thanks. i hope so.

anyone are welcome to give opinion/comment on how to mod this case.

the arcliy is ready make or custom make ?

self made

Self made? WOW...So nice ler
I tot u bought it from somewhere...

no update kah,wanna c how u mod....

if u see it closely, there are a lot of not perfect side. but from far should be ok


some picture coming soon...

picture coming up.


edge and sides are sand for smooth

hm, i think it's nicer if u put the acrylic inside and the grill outside
did u try it to see whether it looks nice or not?
and the fan screws, the ends..will it be touching either the acrylic or grill..? understand what i mean?

This post has been edited by Jinster: Mar 23 2009, 12:25 AM

not really. the arcylic is sandwitch between the casing and the grill, the fan will be touching the casing only. the nut will lock all the grill arcylic casing and the fan together

grill
^
arcylic
^
casing(1st picture)
^
fan

if the arcylic is inside the case. than it will not be visible

okok =D
all the best

yup..putting acrylic in between will give a nice glowing effect..i wonder what colour will b ts theme..

not decided yet. maybe some white. dun see that often

watercooling? what rad?
any update pics?

cant afford watercooling. some led fan should provide some nice effect on the grill

---

Added on March 23, 2009, 2:20 pmupdate

there is a change of plan

i will change the design of the radgrill on the top.
reasons? i am not sastified with the job done on drilling the nut hole. some of the hole are not exact. so maybe i will skip the design tho other.












This post has been edited by tjay_tj: Mar 23 2009, 02:35 PM

some picture on the side panel









work are being done on the top panel at the moment.

This post has been edited by tjay_tj: Mar 23 2009, 02:35 PM

nice cut bro..do u have any plan on relocating the psu?

yup, as you can see the hdd cage was removed in the previous picture. now is to figure out how to fasten the psu

edt~ typo

This post has been edited by tjay_tj: Mar 23 2009, 02:39 PM

woah.. jiayou jiayou haha
looking good there

thankx

Top panel change







much better,

done some mod on the side panel too





notice the changes?






next update will take some time, enjoy...

wow..very large ur sidepanel..

it will be cover by arcylic so that it will look like it is without side panel

This post has been edited by tjay_tj: Mar 23 2009, 11:10 PM

Wow, nice cutting. I think you can start a case modding service here.

BTW, why changed the top panel? I think your original idea is cooler.

This post has been edited by hypermax: Mar 24 2009, 01:50 PM

, still got cacat in my skill, cant destroy other ppl precious case.

about the top panel, i decide to cut off the that part is becuse the screw hole are not in place, some hole are off by too much, so i sut it off...
abit sayang there . next time must always mark the hole properly.

the grill can still be place there but i scared it will vibrate. so maybe will go for arcylic top.

i can say that u have improved haha!
everything looks way cleaner than before
congrats!

I think it's good enough lor.

BTW, if your side window is so big, it'll be hard for you to cable manage.

maybe he will surprise us

still haven got any plan on the hardware. main purpose for this project is for me to pass my time and try out my skill, no worries about the cable management at the moment.

cable management sure will be pain to do but it is not impossible.

i guess someone will be setting up i7 in this baby..

maybe wait few mor years when the i7 price is core 2 duo.



This post has been edited by tjay_tj: Mar 24 2009, 09:51 PM

Anyone got any ideas on how to futhur mod this thing?


BTW.
item bought

erk..8cm acrylic thickness?what r u gonna do with it..

This post has been edited by renesisx: Mar 24 2009, 10:06 PM

Plan to hold the psu with that. havent figure out the design btw.

8cm???
8mm izit @.@

yup u are rite, it is 8mm not 8cm, 8cm thick will cost thousand. if can ever found...

woah..typo lor..
btw, any update for today

scare me..lol
i wake up..browse here..saw 8cm..i nearly fainted back to sleep haha..

yaya..i wanna see latest update too hahaha..
excited

havent done anything new yet. still figuring out.
thanks for support.

idea.

psu bracket






what do ya think?

is that the front? seeing the bays above..i assume it's the front o.o
then ur power cord would b appearing in front? or ya gonna bend it to the back @.@

just 2 side ?? how bout top of psu ?

that will be the back...

the intake fan will be on top, so cannot cover.

i guess he gonna make a new bracket for psu at back to replace the original bracket..
like this or perhaps u wan better airflow,make it 120mm hole..but need some mod on the back part pf ur case..
http://img49.imageshack.us/my.php?image=002hh4.jpg
image:courtesy of ianho
the psu will be mounted with the cable facing front panel..no need to bend the power cable..easy for cable management.. :nod

icic..will get a better understanding after u assemble it

yup that is what i had in mind.


This post has been edited by tjay_tj: Mar 26 2009, 04:44 PM

bro,no update ka??

the project is progressing but not enuf for a update. mostly on brainstorming. next update will be huge.

BTW.

i bought one of these

how much n where u bought ????
nice item u have there....

it is caster/wheel from lian li.
i bought from sg. but can be bought here in also. lowyat's ate got sell. or just pm karom/jy14.
recommended for anyone who wan add wheel to ur pc. nice and good quality.

I sense a mini tank coming. lol.

No update ar?? Faster update lor, so that i can copy your idea.

the only updte till now is the tanker wheels...

going to kl to stock item.

shiny wheels..haha
eager to see ur LL's new look

will have to wait for me to come back from kl.

nice mod ur doing bro... can't wait to see the outcome...

your side panel's window's going to be HUGE though... really can't wait...

thanks

haiizzz long time didnt log in to this forum.. bro fast fast settle down ur mod..looking idea for mine too..didnt finish up yet mine

ler..bro mfcm..mne labah2?

haha... i looking for idea also. just doing this project to pass time.
should be able to finish this project in 1 or 2 month. than try to go buck study

oh my..1 or 2 months ._.
then i'll drop by 1 or 2 months later lols!

sure u are wellcome. this log is all about progress. step by step and also idea sharing. maybe u all can share me some

update.

some picture

wow like the wheels ... can this wheels fit a thermaltake casing?

heh.. finally my dream come true, syabas bro

at first view, ive feelin' that this case could suit with the LL alu tyres

can. fast fast go buy at ate.

after fit the lian li wheels, it now feels like in the family of v1000/v1200/v2000

very nice job bro..thinking of letting go my v600..but ur project makes my hand itchy to chop2 again..haiz..

eh, can fit meh the tyres on thermaltake casing anyway nice mod bro

measure then try??
if cannot then mod it =D

faz faz mod thn show it to us

nice mod. beautifully done. some bling-bling at the radgrill would be perfect. So, finished with the exterior part.
any plan for interior of the case?

can. the tyre is using nut to fit. just drill some hole and fit it.
just make sure the base is flat can already.

This post has been edited by tjay_tj: Apr 4 2009, 10:27 AM

hardware for this mechine will have to wait. trying to do as far as i could including the interior.

This post has been edited by tjay_tj: Apr 4 2009, 10:27 AM

change to other case or proceed to 2nd phase

mor expensive case have mor wow factor

wanna try sff..hehe..


This post has been edited by renesisx: Apr 4 2009, 03:16 PM

nice
like those casing too. i also have one v350

picture.







thanks

really? rich fella..sell ur v350 to me la..let me take care of it..

sure thing.. seems the build of v600 & v1k series using the same material.. solid alu

i buy 2nd hand from kuja


yup. nice aluminoum. i think is 1.5mm to 2mm thick. which is alot consider this case is so small. and the price is nice