tak tahu lah.. dat time, I curi2 dengar je... not sure whether I heard the right things about it though

niway, back to the topic.. hj pet, u are in ndt field? which company bro? service provider kah..?

yups..in OTI..oilfield technical inspection..tryla search dlm tenet..ade sesape tau pasal vibration analysis care to share? ndt ni memangla masyuk kena lak kalo dpt nek offshore kan tapi tu la..in ndt ni 4 example mcm ut, mpi, ri tu sume detect weld defects..kiranye wat benda same jek la (my opinion la) just using different methods..tapi tu la kena tau byk pasal metallurgy..n for sure kena byk membaca la haha demmm

kalo korang nak tau lagi pasal ndt ni try la bukak www.bindt.com ni site ndt uk accreditation. same je mcm mindt just bindt ni british la. kalo dak2 ndt ni pcn certified lagi laku la coz nak dpt pcn cert kena keje dulu baru leh amik exam for those certs. try la bukak www.twitraining.com twi kat sg buloh ni provides training utk pcn, api, cswip..bykkan wat research kat internet la.

Haha. OTI upenyer. Dekat je ngan company aku. 2-3 kali gak pegi situ. Client company aku. Hahaa. Ko wat UT ke bro? Aku kenal 2 org company ko. Sorang name die Taufiq, die wat UT. Sorang lagik Aiman, die baru lagi kut. Ayah die RPO company ko.

Aku baru lagik dalam mende ni, yela baru 5 bulan kut keje, lagi pulak kat supplier company je. So tak la terlibat sangat ngan On Site Inspection ni. Tu yg tanye tu. Bukan aku tak wat research bro, aku ade dah usyar2 tenet ni. Tapi nak lagik tepat, kene la tanye kat org yg dah jump kat bidang ni. At least die leyh share path die camne.

---

Added on March 23, 2009, 5:01 pmPasal TWI, mmg aku dah usyar pon. Bos aku suh register, pegi amek Eddy Current kat sane. Bulan 4 ni stat. Tapi tak tau la dapat ke tak. Kalo ikutkan, da penuh. Aku kat list stand by je. MINDT tak provide Eddy Current nih.

This post has been edited by kooka: Mar 23 2009, 05:01 PM

Afaik YTL is one of main provider 4 vibration analysis service? Biasa aku jumpa bdk2 YTL yg buat kejer vibration ni..nk bg info byk pun x dapek sbb aku x penah ikut diowng keje. Tp equipment yg slalu d monitor tu aku taw la.

qc@general inspector got the highest paid.Dkt offshore gaji bdk2 ndt dpt average je.Dlm 3.5k-6k pr month. Tp klu general/qc insp. blh dpt dlm 12k - 20k sbulan. Tu utk market sini. Kalo utk market luar mcm dubai paling tinggi member aku dpt rm2k pr day.Kontrak 2thn,kerja 3bulan cuti 1 bulan. income dpt mmg bersih sbb x kene tax. Kejer x der susah sgt pun..Kalo nk compare ngan UT, aku pun ghase keje UT lg calen. Sbb tu the best ko ambek sumer cert dlu, then naik jd general/qc insp, kmudian br jd engineer. Kalo dh ade degree lg sonang nk naik level manager.
Erm, schlumberger mmg provide service utk kerja2 brkaitan ngan telaga minyak je. Bab2 ndt ni aku x pernah nmpak diorag guna.

sebenarnye banyak gak comp yg wat inspection kat msia ni mcm sgs, velosi, kurtek tapi tu la..ako xsure sgt la kalo just dgn cert tapi without experience derang nak hire @ not. sebab ako penah sembang ngan sorang personnel dari velosi yg keje part cek2 resume ni. dia cakap even dengan 10 certs pun derang susah nak hire kalo xde experience. so, just try ur luck! rezeki masing2 kita tatau kan?

mmg la. tu sape2 pon tau.. cume maksud aku kat sini, camne untuk dapatkan 1st job untuk 1st experience tu.. mmg la mane2 kampeni pon akan prefer yg ade experience, pedulik ah die blaja sampai master dalam ndt sekalipon.. cume yg aku nk tau ni, camne 1st step nk masuk kat dalam bidang ni, to gain the initial experience.. ko dulu pon, takkan la pas amek certs, ko terus wat keje tu sendiri.. mesti ade kampeni yg hire ko.. no offense mate

senang cakap gini la, topic ni aku bukak sebab nk tau CAREER PATH dalam bidang ni, especially to become an Inspection Engineer.

Contoh camni la:

1) Nak jadik Doktor Gigi, die kene la amek degree dentist dlu. Pastu keje ngan Gomen. Kat situ die dapat experience. Pastu die bukak klinik senirik

2) Nak jadik Engineer, mesti kene amek degree engineering dlu, pastu wajib register kat IEM, BEM. Pastu keje carik experience. Then amek exam untuk jadik Ir, pastu jadik super professional engineer.

Tu contoh la. So skang ni, destination aku adelah nk jadik Inspection Engineer. Ape certs2 yg perlu aku amek. Pastu, choose company yg camne, company ape. Bagi tips ke. Tu soklan sebenor aku. Tayah la mention pasal "ade 10 cert pon tak gune kalo takde experience". Everybody knows dat. Sorry, emo sket.

Lagi satu, kalo ko nak tanye pasal vibration ke, ape2 ke, ko bukak la satu thread lagik. Open topic tu. Nnt ade la org yg masuk bagi pendapat. Ko jangan expect lak dak2 vibration nk masuk topic Inspection Engineer ni.

Ni hard feelings keyh.

Ciao

uihhh emosi btol ko ni . hmm xpe2 no hard feelings. from my understanding, background ko degree engineering kan? then, it shudnt be a problem la to be an inspection engineer. slow2 la ko gain experience ngan cert MLVK tu. then bila da cukup experience, bleh la amik cert PCN accreditation. sebab PCN ni nak amik exam dia kena ada experience dulu. try la cek ngan puspatri ke twi ke utk requirement experience dia. mcm member ako sorang dak sgs, dia amik sume cert ndt kat puspatri n dpt la keje kat sgs. terus jd inspection engineer. mcm ko stat ngan eddy current pun ok, nanti bebile mesti comp ko anta gi wat ut ke ri ke mpi ke. xpun own fund la utk courses tu.

pasal vibration analysis tu, sori la ye tersebok lak dlm thread ko neh. peace!

cert pcn x reqiured experience pun kalo nk amek kalo nk amek cswip 3.1 mmg wajib la 3thn experien.kalo yg brminat nk amek cert PCN tu sila2lah melawat ke lmn web TESDEC-INSEP utk maklumat lanjut. Yg ni ada full sponsor dr pihak tesdec. Jd x yah le korang byr yuran sampe 20 ribu utk cert pcn

TESDEC

hahahhaha.....aku sama ja ngan kooka.....tapi dia dh grad....masalahnya aku ni spm leaver...result serious *****.....so aku rasa nak ambik NDT ni....so aku nk tanya korang aaaa...bagus x ndt ni????.....aku dgr cita member aku semua kata ok.....

dikatakan la aku mmg nak ambik benda ni...so apa 1st step yg perlu aku wat??????????.............
berapa fees dia???...

1 lgi aku nk tanya....pcn and qc tu menatang apa???......xD

hmmm...rilex bro..jgn panas2....

basic u should have a degree in mech, material or other related degree..
then go further with basic in inspection....NDT Certs...UT,RI,MT,PT...
if u can, go and have experience in doing all types of NDT inspection since u will have a better understanding of doing it instead of theoretical only...

then upgrade urself to welding inspection...maybe u can work as QC inspector elsewhere doing QC job...familiarize with all the codes and documentation needed...u can take the welding inspector cert from here maybe it PCN 3.1 or the much sought after, CSWIP 3.1...make sure u are really good in codes such as ASME, AWS, API and others...

after that, u can opt to go for API 510 for basic in API inspection, API 570, API 653 and others...

walla..since u have a degree, it will be easier for u to become an inspection engineer..

u can always skip the NDT part and do the QC job directly but beware, u will not be proficient in NDT if u do this even u have the certs...practical is very important.....

u have the certs and exp, go for VELOSI, ABS, GLM, SGS, DNV, TUV, OPTIMAL, SEm and a lot more...

hmmm...next time we'll talk about the painting and corrosion, E&1, mechanical, marine surveyor and etc....this also lead to inspection engineer...

u need to have an objective, be it welding inspection, E&1, mechanical, painting, corrosion, reliability, plant or etc...then u can specify what certs and exp u need to become one...

inspection needs certs and exp....have patience newbies...and spent ur money wisely...courses are damn expensive....hahaha...

---

Added on May 25, 2009, 8:18 pmhmmm...my advice, amik je sijil2 kemahiran atau diploma kat politek atau SKM tu....biar pun SPM ko macam *****...
NDT memang best tapi nak naik susah melainkan ko ada qualification and exp...nanti ko dah 4 5 tahun pengalaman, nak masuk company besar2, bnde first die tnya, ko de degree atau diploma?....

dah ada diploma paling kirang baru venture masuk inspection field....sedap sikit....

a remembrance to newbies...mmg la kita dgr gaji sume masyuk2 bidang ni tapi semuanya bermula dgn gaji rendah dulu....be prepared...jangan la expect gaji terus meletup ye...salah tu...kang frust lak dpt gaji rendah...huhuhuh...

This post has been edited by scotjr: May 25 2009, 08:18 PM

WALAN....MUZ HAVE DIPLOMA......x nak de......take my time....3 years for diploma.......aku nk NDT ni sbb dgr cita dia fast trackk..itu yg suka tu...

@TS, actually to attend PCN 3.1, you don't need any experience. Tapi untuk dapat sijil die actually kene ade at least 1 year experience and lagi baik kalau ade a little bit of knowledge on what the scope of work for the inspector. senang sikit nanti ko nak paham.

And kalau ko x kisah masa, aku rase baik ko amik WI dulu baru NDT. And kalau ko nak amik course ni for free, x silap aku PUSPATRI akan buat satu lagi intake bulan 6 ni utk dua2 course ni. And between job scope UT man dgn QC inspector, aku rase QC inspector punye kerje lagi banyak tapi UT man punye responsibility lagi tinggi.

And pandangan aku, kalau dibandingkan course UT ngan RT, aku suggest ambil UT sebab less risk ngan payment lebih tinggi.

salamelekom.. nak tanya arrr.. aku ada cswip 3.1 welding inspector n diploma EWS European Welding Specialist) kat mana aku leh keje ekkk??? brp gaji aku leh dapat ekk???? aku tak tau arrr nak gi mana. pastu tu aku takut arr nak buat keje inspection nie... aku cadang nak ikut otai2 buat keje arrr... sapa leh tolong ek??

byk giler company kat luar tu, kalau main-contractor, aku rase SDE ngan MMHE boleh demand tinggi sikit. Kalau sub-con, danamin, global, velosi and etc. Kalau nak gi 3rd party pun byk jugak mcm lloyd ngan SGS.

giloss arr...kesian newbie...jgn main2kan diorang...tau la awk dah otai...plz be well mannered...

send your resume to this email <technoanalysis@gmail.com> projek in mmhe, i'm not related to this company just sharing this 'lubang'
u have a basic requirement there, why should care about ur guts? should ask min 5k/month there!! and ur chances almost 50/50 because u already have CSWIP 3.1, cswip is more preferable than PCN in welding inspection. the rest depend on ur interview

bkn main2 tu.. they're flooding our market ready.. and willing to work with such a low pay.. kacau market for oldtimer. Luckily i already shift my career more to engineering & construction. and my validity of NDT cert is already expired one by one. No commitment to renew it.

CSWIP 3.1 are very much soght after since they are not really much of the holder...even for API holder...there are only a bunch of those people....

in NDT field, Advance NDT are in demand be it IRIS, TOFD, Phase Array.....u can take TOFD and Phase Array at TWIsea....so damn expensive..



tu yg cakap de cswip 3.1 tu sje main2 je tu....nak ada cswip 3.1 exp at least 3 tahun in WI....mana ada freshie amik cswip 3.1 and EWS...yg otai pun blum tentu lepas..

This post has been edited by scotjr: Jun 18 2009, 09:50 PM

Hai...

Thanks for this topic..i can gain some information regarding to this carrer..acctually i will take welding inspector course at the end of next months...

lecturer from utm skudai teaching material sc?

jumajuma, ko kenal org technoanalysis eh? itu ari aku ade meeting ngan Ali tu, ofis diorg dekat ngan ofis aku.. dari yg die cakap, pojek cam banyak je kat mmhe.. diorg nak bape belas unit UT flaw detector ntah, lupe lak.. tapi mmg tgh carik2 org gak tuh