my z600 black label can fit in to my centurion 5
is way huge though
cheers

@ZeneticX,
Ya i agree hot air go up wan, so bater make it to exhaust.


@loongking,
Waaaah! hen mai ahhhh! how pang ahhh!!! demmm nice...!!!
hor? how come ur pci slot like like the HAF wan??

This post has been edited by aBc!!: Mar 29 2009, 10:17 PM

i took it from my cosmos black label
cheers

oic anyway cool rig man.

trim the fan retention a little enough~
dont mod ur casing unless u REALLY need to

wow even the tool-less mechanism u take out from the Cosmos?

@aBc!!
I agree its nice
i also now

yea should be exhaust
but when change to face to outside
it will become intake rite guys

juz the pci bracket is from cosmos
the rest all original
cheers

bro the air direction follows the direction of the bearing
wherever the bearing side of the fan is showing, there is where the air will go

wow what happened to ur Cosmos brackets then?
Cosmos use what brackets?

2 vga with 2 slot = 4 pci bracket
1 sound card = 1 bracket
cheers

@exploited,

no ah it's still the same ah as exhaust.

cheers on the beauty
i love it when the casing interior is mildly lighted with black

hoho hard to explain leh
the fan can mount on both side of the metal, each side can mount intake or exhaust

if cm fan.hologram sticker (shiny 1) face down (in ur casing) = exaust

others i not sure.but u can refer to the fan blades,i guess they all have the same rotation principle


wont be online for whole day 2mr .waiting for my new gc on tues,thn i will post some new cable management

@Koki,
Ya , but most impotently hot air go up so most of it we will set it as exhaust.

yea right now i mount the fan for exhaust
then if i change the fan face
it will also change to be intake rite

sory quite blur

yes u are right~!
but referring to the fan blades are not right o, must see the direction of rotation
wah using Zotac GTX260 now change to what o?

yaya~ must follow the law of heat to maximize cooling!

EDIT @exploited
bro dont worry u can change in the side of metal, and also the side of air direction SEPERATELY
so if ur fan is inside the casing, it can be exhaust and intake, and also vice versa

btw here's a photo i secretly took in a new computer shop @ Parkson, Ipoh



This post has been edited by Koki: Mar 29 2009, 11:08 PM

yea im using cm fan fot the top
current setting is hologram sticker (shiny 1) face down (in my casing)
need to mod the fan a little bit
yeah

edited
Thanks Koki

This post has been edited by exploited: Mar 29 2009, 11:11 PM

some fans are embedded with arrow directions
if ur fan don hav then try operating it and see how the air blows with a piece of paper

@Koki ,
New style kot?


@exploited,
you using cm fan right? here u go look at the picture the arrow is the direction of the air flow.

yea thank aBc

yes my fan mounted to be exhaust right now

@exploited,
all the best bro~