QUOTE(tech3910 @ Mar 10 2009, 08:15 PM)
OC in anyway wont void the warranty.
just dun push too far until it leaves physical damage on the processor.
example, overvolting until processor burn.
for each processor model & stepping, there is a recommended operating voltage range.
check intel official site for ur e6300.
pls dun mislead ppl... this is TOTALLY WRONG
QUOTE(Silpheed @ Mar 10 2009, 10:46 PM)
Overclocking is not supported and encouraged by both AMD and Intel, and will void the warranty. However in practice they do not really enforce it but just don't go too extreme until the processor is burnt (though quite unlikely as all modern processors have built-in overheat protection).
now what ure saying is right
QUOTE(JeffreyYap @ Mar 10 2009, 10:57 PM)
It won't void the warranty, just don't go so far.. cheers
again, dun simply say
QUOTE(tech3910 @ Mar 10 2009, 11:17 PM)
nop, OC is part of CPU performance & value calculation.
y do u think intel & AMD release extreme & Balck Edition?& it will not void the warranty if u OC on the safe side, like vcore dun go beyond recommendation.
it is good for beginners to learn how 2 OC.
& wen OC, it not necessary to increase vcore. there is a limit u can hit wit stock vcore. (like my q6600 can hit 3.1GHz wit stock 1.232v)
some OEM manufacture mobo bios does not allow host fsb control, so hav 2 use s/w to OC.
there is ntgh wrong wot OC via s/w, just less setting & cannot push as high as bios OC.
eg. s/w OC allows user to set fsb but fsb:ram ration & ram timing will follow bios setting.
as the result, ur ram might get push too high & lockup.
again, dun mislead ppl... those who can afford black edition and extreme edition processor, most probably have the money to buy another one in case the proc spoils permanently due to OC, dont u think so?
QUOTE(AMDAthlon @ Mar 10 2009, 11:42 PM)
Just take like this :
It will void your warranty if you leave any physical evidence that occur such as burn marks..etc
Even if you overclock as high as possible but still doesnt leave some physical evidence,i dont think they(AMD or Intel) will find out that the processor was damaged via overclocking.
have u ever been into an rma module in a production? HOW SURE ARE YOU they wont know u overclocked the processor or not? be thankful they are just closing one eye
just so you guys believe me, here's the conversation of me and one intel staff
» Click to show Spoiler - click again to hide... «
Allan: Thank you for contacting Intel Customer Support. How can I help?
you: hi allan
you: there's a question i would like to ask
Allan: sure
you: I have just bought an Intel Core 2 Quad Q9650 last week and when i checked through a 3rd party software, it states that my VID is 1.225
you: i would like to know, what is the maximum voltage i can use and still be entitled for Intel's warranty service?
Allan: Please check the following information
Allan:
http://processorfinder.intel.com/details.aspx?sSpec=SLB8Wyou: according to the website, a Q9650 has a VID voltage range of 0.85v to 1.3625v
Allan: VID Voltage Range: 0.85V – 1.3625V
Allan: yes
Allan: and yours is within range
you: does this mean i can overclock the processor and still be entitled for warranty service, provided i dont go over 1.3625v?
Allan: Overclocking is not under warranty
Allan: and we do not provide any information about it
you: ok
you: so under any voltage range, i wont be eligible for warranty service if i overclocked the processor?
Allan: correct, under any voltage range
you: lets say i overclocked it to 4.00GHz at 1.225v, will i be eligible for warranty service if the processor shall malfunction one day?
Allan: I do not know, sir, overclicking is not an option for warranty or support
Allan: "overclocking"
you: ok, is there anyone i can talk to that can answer me for this question?
Allan: No one here will talk about his specific questions, We do not support over clocking
you: i see, thank you for the answer.
Allan: you are welcome.
---------------------
Allan: Thank you for contacting Intel Customer Support. How can I help?
you: hello again
Allan: yes
you: there's one more question i'd like to ask
you: the term overclocking, refers to setting a higher clock frequency than the stated frequency on the box am i right?
Allan: I am sorry sir, I already mentioned that we do not support this type of questions
you: i would just like to know, if i am still eligible for a warranty service if i run my Q9650 @ 3.00GHz at the same speed but at a higher voltage
Allan: we only replace processors that were working within specifications.
Allan: out of that range there is no warranty, Intel has some ways to determine if the processor was overclocked or not
Allan: if it was, then no warranty will apply
you: ok.
you: assuming the shop provides only one year of warranty, how do i send my processor for a warranty service after the one year period?
you: do i have to pay for the shipping fees?
you: and where do i send the processor to?
Allan: if your processor is box then it is cover under warranty for 3 years
Allan: you pay for shipping in then we will pay shipping back
you: ok
Allan: I do not have details where you need to send the processor back, because you need to be in touch with people in your region
Allan:
http://www.intel.com/support/9089.htmyou: ok
you: thank you for your answer.
Allan: that link will provide details and phone numbers
Allan: and this link
Allan:
http://www.intel.com/support/processors/sb/cs-025525.htmAllan: for warranty information
you: ok. thank you for the links and your answer.
Allan: you are welcome.
like wat slipheed say, be thankful they are closing one eye... if they became strict, then u will noe

Added on March 11, 2009, 12:36 amoh ya, software overclocking and bios oc is the same thing... the only difference is u dun have to restart ur pc to oc if u use software or hardware based overclocking tools... the bad thing is, u wont know if ur oc settings is stable enough to pass a boot up

, but its good to get the most out of ur rig and get validation from cpuz n tools alike hahaha
This post has been edited by iBenQ: Mar 11 2009, 12:36 AM