QUOTE(ravin d @ Nov 19 2008, 11:32 AM)
Hi Guys,
Need some help!
iPhone Generation : 2G
Current Firmware : 2.1
iTunes Version : 8.0.1
Computer Platform : Vista
Jailbreaking software : QuickPWN
Problem Encountered : No Service
Steps Had Taken (list down) : It's my friend's iPhone which he bought from U.S. The Problem of No Service of this 2G iPhone first started after the iPhone fall from the chair while it was in his pocket. At that time the Firmware was 1.02. After that fall, the iPhone had very bad reception of signal (only 1 bar), then after a few days it only says No Service. I thought by updating the firmware to 2.1 (Update button in iTunes) would help but after updating to 2.1 (then Unlock & Jailbreak using iClarified method), the No Service is still there. I have tried 2 sim cards and I still get the same problem. For now, I guess its not the sim card as when I insert that same sim card to another phone, the signal strengh is full and I can make and receive calls. I can only assume that probably it's hardware related but thinking it was just a small fall, it shouldn't of have damage the iPhone.
Steps taken:
1. Turn on the airplane mode and turn it back off after a few seconds - result: I still get No Service
2. Restart iPhone - result: Maxis signal about 1/2 bar then after a few seconds, I get No Service.
There is this site [http://forum.gsmhosting.com/vbb/archive/index.php/t-449182.html] that recommeds to use iBrickr but I am not sure if it's for firmware 2.1 based on the steps described there.
Anyone out there.. knows how to resolve this????
i think is the antenna inside brick ad..need to repair it...or used it as itouch...Need some help!
iPhone Generation : 2G
Current Firmware : 2.1
iTunes Version : 8.0.1
Computer Platform : Vista
Jailbreaking software : QuickPWN
Problem Encountered : No Service
Steps Had Taken (list down) : It's my friend's iPhone which he bought from U.S. The Problem of No Service of this 2G iPhone first started after the iPhone fall from the chair while it was in his pocket. At that time the Firmware was 1.02. After that fall, the iPhone had very bad reception of signal (only 1 bar), then after a few days it only says No Service. I thought by updating the firmware to 2.1 (Update button in iTunes) would help but after updating to 2.1 (then Unlock & Jailbreak using iClarified method), the No Service is still there. I have tried 2 sim cards and I still get the same problem. For now, I guess its not the sim card as when I insert that same sim card to another phone, the signal strengh is full and I can make and receive calls. I can only assume that probably it's hardware related but thinking it was just a small fall, it shouldn't of have damage the iPhone.
Steps taken:
1. Turn on the airplane mode and turn it back off after a few seconds - result: I still get No Service
2. Restart iPhone - result: Maxis signal about 1/2 bar then after a few seconds, I get No Service.
There is this site [http://forum.gsmhosting.com/vbb/archive/index.php/t-449182.html] that recommeds to use iBrickr but I am not sure if it's for firmware 2.1 based on the steps described there.
Anyone out there.. knows how to resolve this????
Nov 21 2008, 04:32 PM

Quote
0.0183sec
0.66
7 queries
GZIP Disabled