Thanks. Already PM you

Are you P1 staff?

Any proof that Korea basestation can reach 10km? As far as I can see, the distance is more on the RF limitation but not the technology & equipment limitation.

This post has been edited by p4n6: Mar 11 2009, 01:45 PM

RSSI and CINR, the higher the better.

But you need to understand the concept of negative number.

---

Added on March 11, 2009, 10:46 pmIt's the normal reaction for every ISP, when every users treat their best effort line as a leased line, ISP will retaliate to throttle p2p traffic.

It's the same cycle we all encountered before during StreamyX reign.

It's inevitable. No ISP will provide us ALL YOU CAN EAT BUFFET with RM100.

This post has been edited by p4n6: Mar 11 2009, 10:46 PM

Yup, been waiting for that ... but not sure those that already changed their username/password previously will be able to get the upgrade.

---

Added on March 14, 2009, 12:45 amI've done some researches on wireless technology prior to subscribing to it.
I can say that to calculate the maximum bandwidth of wireless technology is way more complicated than in wired technology.
So I can say that your assumption on the 70Mbps is way too overated of the technology capability.

---

Added on March 14, 2009, 12:48 amBLOCK & LOWER DOWN THE DOWNLOAD SPEED ... this is two contradicting statement ... how can you block but reduce the speed??? Already block then it's zero lah! But somehow people can still download ... then it's not block lah! P1 Careline says wrongly or you interpret it differently?

Block or Reduce Speed???

It's different.


This post has been edited by p4n6: Mar 14 2009, 12:48 AM

Mr. OWC, I'm providing a fair statement here.

You have suck service, I have good service, you complain about it on this forum, I recommend it on this forum, you have the right to give your view, I have the right to give my opinion.
How is that protecting P1 Careline?

Just that you are in misery that doesn't mean everyone else need to stand by your point.

I will challenge you if your point is not valid and i will support you if it's right.

And to answer you question, no I'm not P1 Careline and I'm not your bf, Alan, just that my userid starts with a P that doesn't make me affiliated to P1, duh! Stop being a schizo and control yourself...

I'm a subscriber of their service, if their service sucks, I will screw them myself.

I think you should report this matter to MCMC if you have the proof and you really think it will help, I don't see why not?

This post has been edited by p4n6: Mar 14 2009, 11:29 AM

I'm fan to the technology not necessary to P1 alone ... somehow AMAX never make it to my home only
AMAX has lower number of subscribers, so I believe their service SLA will be higher at this point of time.
P1 has a head start in term of gaining subscribers as well as chance for them to improve their network.

Previously I have told everyone the danger of becoming a guneia pig and not too early to judge the network performance as for all new network, shit happens when subscribers increased

I have been monitoring P1 report card since the beginning, from their track record, you can see a wave when subs comment the service is good, then for a few months, the service performance will degrade, then you will see alot of people complaining on LYN, then the service will improve back, ... and then it will come back down. If you ask me, they are still adapting and stabilizing ... they will improve, it's just time.

I'm using now because to me, stability is the major concern not exactly the upto 1.2Mbps/500kbps advertised speed.
I can see the stability improves from before that's why i start to put my hand in now. Based on my daily usage, a stable average of 300kbps DL/ 100kbps UL is more than sufficient, no point to me to be kiasu and demand for the max cause i know they are offering best effort service. I read my T&C and understands it well.

How will it helps to perform troubleshooting and accessing to the page?

Don't go out topic ler ...

You sure you want to do that? As WiMAX is a pretty new tech now, the firmware compatibility could be the key for better stability of our connection.

I believe they are releasing the modem access page soon according to P1 staff on LYN previously.

All ISP also will throttle P2P, despite port forwarding, I think it won't help ...

At first people use StreamyX, then StreamyX starts to throttle p2p, then people move to Maxis 3G and Celcom 3G, then Maxis/Celcom throttle p2p, then people move to P1, and now P1 throttle p2p .. so on and so forth, p2p users are like stray dogs.

This post has been edited by p4n6: Mar 23 2009, 10:49 PM

Even if they invest more to buy a bigger pipe, I too will not think they will allow p2p. Bandwidth is money ... they are charging us RM88, I don't think they will let us enjoy the big pipe, instead they will sell to more people.

That's why I said P2P users are stray dogs, they are the unwanted subscribers as no ISP will prefer them to be in the network. And no ISP will pay more to ensure P2P users to be happier ... no such thing.

This post has been edited by p4n6: Mar 24 2009, 08:26 AM

Wow ... the firmware upgrade already so long ... you two still using old firmware ... you never turn on your modem?

This post has been edited by p4n6: Mar 30 2009, 11:05 PM

I think it's

username: admin
password: admin123

---

Added on April 12, 2009, 10:08 am You are the god in port forwarding.

This post has been edited by p4n6: Apr 12 2009, 10:08 AM

But if you change the firmware causing your P1 modem to malfunction/ cannot connect, you need to pay for the rest of your contract period without a modem to use or pay RM999 to get another one though. IMHO.

---

Added on May 4, 2009, 8:07 amYour game DC or your WiMAX connection DC? Just curious.

This post has been edited by p4n6: May 4 2009, 08:07 AM

I used to play online games too, I know game server could be congested too sometimes. Something to ponder.

You should enter the private IP of your client such as 10.1.1.1 etc depending on the interface you want to port forward to.

---

Added on November 20, 2010, 10:50 pmFrom experience and some friends help, note that in the modem page, there are 3 signal indicators:

1. RSSI
2. CINR
3. Transmit Power

The CINR will tell you whether your DL throughtput performance, the HIGHER the better.

The Transmit Power will tell you your UL throughpur performance, the LOWER the better (maximum for modem is 27, maximum for dongle is 23).

The LED light on the modem will only tell you the signal quality based on the CINR but that's not the full story.

It's recommended to login to the modem page to check and adjust the modem location so that it can acquire a low transmit power as well for better UPLINK throughput.

At least that's what I do. Hope it helps.

This post has been edited by p4n6: Nov 20 2010, 10:50 PM