i've been having this problem .


lets say i set my fsb 450X8 but d sidebar detect it at 450X9 which shows
and it's multiplier kept changing from 6-8 .
its weird cause i already disabled d auto clocking thing ..

and d voltage in everest ultimate is waaayyy lower than d actual one i set .
d most correct stats for my PC is in d CPU-Z .

y iz diz happening ?
n my fren PC becoming quite unstable here .

[attachmentid=798483]

disable EIST at bios and the everest is showing the proc VID value instead of its current value.

to check the vcore value u need to select the sensor option.

if u see the taskbar.....the value in the yellow box is the Vcore u currently use.

everest is showing the VID of the processor, not the vcore u set. CPUZ can detect accurately for all the setting u set in bios.

ok dat's quite fair explaination .
btw my sidebar indicates 4.03 which is 480X9 but i only set 480X8 .
y is diz happening ?
nvr happened b4 diz .

Iinm the sidebar just detects the maximum multiplieryour proc has then multiplies it by the current FSB. Orthos displays the clockspeed ina similar way

anynthing la .
having headache now .
d sidebar is nothing already .
as i change to more stable clock it's detectable already .
currently running on 425x9 .
but its not stable .
prime95 failed after around 5 minutes .
crashed into blue screen .
running 1:1 850mhz 5-5-5-12 2T 2.3V .
i dunno how to make d RAM stable already .
can anybody help me wif d RAM .
guidance needed .

try put ur fsb lower like bout 400.

400 confirm stable la as d RAM running on 800mhz .
wanted to try to push d RAM .

try 5-5-5-18 for the ram and use the stable clock but for the ram try use a differrent divider.

try2 for sure .
>.<"