i had upgraded my pc, and i tried to OCed it. the BIOS shows the OCed value, but when enter windows, its still the default value or lower (depends on the multiplier X default bus speed). i maintained the HT to 1800MHz with CnQ and Spread Spectrum disabled. AOD didnt allow me to auto clock (grayed out) and i only can see the temp, speed etc, but cannot change anything. maybe my proc is locked?

spec:

AMD Phenom X4 9550 2.2GHz (200MHz x 11, 1.2V, 95W)
MSI KA980G-M
Corsair DHX2PC6400 2x1GB
ATi HD3870
Silverstone ST50F
Xigmatek Red Scorpion
CM Centurion 5
bios is the latest

This post has been edited by typicalsite: Feb 6 2009, 04:14 PM

humm..tried bios update?

the bios is the latest

cube test care ni...
lepas oc proc tu..
dier akn terauto restart..

lepas restrt..
shutdown kn..
pastu on blik pc..

download cpuz, launch it, and take a screenshot of it and post it here.

happen to me once, i reformat & installed a new windows (vista in my case) & then it start to see the OC values

Continue your discussions here:

http://forum.lowyat.net/topic/913794

//Closed