v10? dont bother la bro. so expensive, tec consumes 75w x2
dam crazy.. like extra 2 e8600 power consumptions
and..

v8 pwns v10.

http://www.xbitlabs.com/articles/coolers/d...master-v10.html

omfg already v5 but still talk talk talk

more pics plz!

here's some of mine. Minor upgrades like added XLF 120mm and kingston hyperX 1066 (lousy)

all fans is intake fans except for back cpu and back mobo. Very positive pressure case =D iLike.







front bottom 90cfm fan got 1 dead LED. Yuks.

about 6~8 layers of flat black colour spray
done within 8 hours.

@hahn
hahhaa busy with my campus shits.. cuz im in the student's association, gotta organize some event for CNY other major events, so yada yada busy. Actually took all the pictures before CNY liao.. but compiling and uploading takes so much time, so on pause now. CPU cooler using is deepcool iceblade pro.

its really easy to spray your casing. JUST SPRAY. lol spray 1 layer from 1 feet distance, wait for it to dry, and spray another layer again. easy peesy

@xelnamikaze
any brand will do i think. i bought the cheapest brand lol.

@regentcid
lol i have so many extra fans, dunno where to mount. So just simply put behind the heatsink la haha. Creates quite a turbulent.. the loudest point of my casing. Still its relatively silent setup.

@koki
just spray wherever reachable. Cuz places like inside the cdrom bays etc cant be seen unless u dip ur head into the casing and peep at it la.

lol yeah i got the white ccfl inspiration from that mod also
however.. red doesnt suit my taste la.. suddenly 1 big red shit on top of the table out of all the black keyboard, black laptop, black speaker, black LCD.. tak match la.. hhahaa

Dust? My casing is almost dustless. Thanks to improvised RM4.90 car sunshades. Have a look.







Just use double sided tape.

just opened up my front panel to take pic of my 90cfm
to my surprise, the dead LED of one of me 90cfm revived! wtf?





Anyway, comparing 90cfm and xigmatek XLF, air pushed by 90cfm is slightly higher.. and i really mean slightly. If xigmatek XLF is rated at 61cfm, CM 90cfm will be around 70cfm subjectively. And if you read around forums, 90cfm's led tend to die out really fast, where by i havent heard bout XLF's LED is dying. Sound produced by 90cfm is also slightly higher than XLF. So personally, i'll prefer XLFs.. too much blue makes my rig looks normal and 'tame'

btw XLF 120mm is priced at rm25 from robyncom (rockrock) and rm28 for 90cfm.

XLF FTW.



This post has been edited by pekies: Feb 10 2009, 12:35 AM

Iceblade pro with 1 fan lose to CCF with 1 fan.. but when iceblade pro mounts with 2 fans, its one of the best air cooler around.

---

Added on February 11, 2009, 12:47 amoh ya.. and put a double sided tape at the bottom of the fan


This post has been edited by pekies: Feb 11 2009, 12:47 AM

IBP only cost rm110 from robyncom.. lol ask him postage to ur place maybe add rm7 or something.. then he sells xlf 120mm for rm25 only.. hahhaa dam cheap la compare to others. Btw i slightly lapped my IBP cuz the stock contact surface a bit rough.

Yeah, the transparent plastic is to preserve the positive pressure and prevent air from escaping from the front. Lol i cut it out from my front page of lecture notes. Like those transparent sheet at the front and back of a binded photostated book.. lol im seriously cheap.

some IBP review here by coolice
Note that stock CCF fan is 80cfm compared to stock IBP of 60cfm..

http://forum.lowyat.net/index.php?showtopic=199

---

Added on February 11, 2009, 1:06 pmalso my maximus2 formula cannot use CCF.. was previously using CCF on my MSI X48C Platinum.

This post has been edited by pekies: Feb 11 2009, 01:06 PM

v10 and v8 comparison
http://www.xbitlabs.com/articles/coolers/d...10_9.html#sect0

price of v10 : USD $110~120
convert to ringgit, around rm400~450

better off with water cooling

http://www.xbitlabs.com/articles/coolers/d...10_7.html#sect0

it's good to keep this thread active

but try to keep your post constructive and informative.

dun wanna scroll the whole page just to realise its all personal issues and non cooler master related stuffs. There's always kopitiam for everything else.

no offense to anyone.

kthxbai

haf is steel, hence explain why it is one of the cheapest tower casing

ops sorry.. with my sleepy eyes i read haf932
my bad =P

WTFF!
ALL CAT'S FUR
ZOMFG

liuteva
try positive air pressure setup for ur casing. With that kinda exhaust cooler, positive setups can bring down ur gc temp at least a few 'C

INFERNO FX!
wah godlike
can buy almost 3 of my deepcool iceblade pro.

tips : remove the fans below ur GC.. those fans creates low pressure around in intake of ur GC, less airflow into ur GC, hence higher GC temp.

basically u want the air around ur gc to be as high pressure as possible to ease the air intake of ur GC fan..

cheers

p/s : i love pics

paiseh...
to teamlok's setups only
=P

@ dan
i used to keep cats and i do experience such problem also
one way to avoid such thing is comb ur cat EVERYDAY or loose furs
you'll be surprise HOW MUCH HAIR THEY DROP EVERYDAY

btw ur cat is sooooooooo cute =)