Outline ·
[ Standard ] ·
Linear+
*Proton CPS club V3.99, First page UPDATED!!!
|
sphiroth
|
 Mar 9 2009, 09:56 PM
|
|
QUOTE(feedzz @ Mar 9 2009, 09:29 PM) Yo bros, wondering about service interval. I just serviced my car at an authorised SC last friday and the guy told me that actually service interval is 10k for campro cars and that includes CPS after the first 3 services. I haven't asked any proton SCs nor iCare. The guy said semi-synth 10k interval. Fully synth also 10k interval coz the oil filter cannot tahan. Air filter the only thing need to check every 5k, need to change if too clogged up. Maybe I'll call iCare later to confirm this but anyone here using fully synthetic and maintaining a 10k service interval?
Added on March 9, 2009, 9:37 pmAlso I noted that eastwest updated Waja CPS fuel consumption on the front page. I averaged 0.14+ cents per km when outstation (90%highway/out of town + 10% city driving. About 12+km/l driving the Gen2 CPS Will update on 40% city driving + 60% highway/out of town later. The service interval is always 10k km, whether u used semi or fully synthetic. Infact, most continental car can go for 20k km using fully synthetic. |
|
|
|
|
|
jctasoga
|
Mar 9 2009, 09:57 PM
|
Getting Started
|
feedzz, i would think the oil filter will be dirtier at 5k no matter wat sort of engine oil u use. air filters impossible to clog up so fast under 10k kms... i find it appalling to have info like tat told by SC...
Added on March 9, 2009, 10:33 pmwats the rear anti roll bar / sway bar size of our waja cps? 16mm?
This post has been edited by jctasoga: Mar 9 2009, 10:33 PM
|
|
|
|
|
|
eujinee
|
Mar 9 2009, 10:46 PM
|
Getting Started
|
QUOTE(jctasoga @ Mar 9 2009, 06:37 PM) looking for the luxeon LEDs 1w which are bright n low power consumption. http://www.jaycar.com.au/productView.asp?I...ed&form=KEYWORDadd in this: http://www.jaycar.com.au/productView.asp?I...AT&SUBCATID=347interior light delay kit. voila... ur very own ligthing project. cost wise looking at rm100-150 hehehe.. but there are other methods to reduce this as well.. so i'm looking around for the best ways to do it... normal LED strips is my choice coz the luxeon LEDS cost as much as rm50 for one pcs.....  found a acessory shop done up my interior lighting..rm50 total rm15 per led strip x2 rm10 for some lousy swtich (will change it soon) rm5 labour thn bought a bmw rear light hehehe...rm 480 changed my wiper to silicon rm 85 damn poor now..will take picture tmr.... i like the delay lighting..will try to find around electronic shop... |
|
|
|
|
|
jctasoga
|
Mar 9 2009, 11:07 PM
|
Getting Started
|
post pics for us to admire la.. hehe...
|
|
|
|
|
|
laytiong
|
Mar 9 2009, 11:13 PM
|
|
|
Lightened my car total of 16kgs courtesy of SSR Type C replica. Taiwan made. 15x6.5JJ. 5kg each compared to stock Waja CPS rim weighing 9kg each. The Civic FD 17" Enkei rims also same weight with standard CPS rims. Dem heavy JRD rims. Improvements: 1. Easier to wheelspin. 2. Pick up from 3rd gear at 25km/h is much easier. The yet to be felt are lighter steering response but I do not see much difference as when the wheel rotates the inertia takes over rather than weight. I'm looking forward to faster pickup and better stability as the offset is 40mm thus the wheels are further apart. Total of 12mm track gain. Attached thumbnail(s)
|
|
|
|
|
|
loong2020
|
Mar 10 2009, 12:43 AM
|
|
|
QUOTE(eujinee @ Mar 9 2009, 10:46 PM) found a acessory shop done up my interior lighting..rm50 total rm15 per led strip x2 rm10 for some lousy swtich (will change it soon) rm5 labour thn bought a bmw rear light hehehe...rm 480 changed my wiper to silicon rm 85 damn poor now..will take picture tmr.... i like the delay lighting..will try to find around electronic shop... wah..wad brand u use for ur wiper??....silicone really quiet and smooth...BUT....dont put rainx...  ....i put rain-x and use silicone wiper, become noisy and wipe not smooth,keep on jumping....  have to change back to rubber.....bought the bosch wiper normally sold at shopping mall with size rated on it....is it good??.... just changed, so far smooth and quiet.... |
|
|
|
|
|
norseman
|
Mar 10 2009, 06:01 AM
|
Getting Started
|
Is it the blue silicon wiper? Cuz my family's 2 cars all use that. I don't feel much difference, maybe last longer.
For the LED lights, where they put the switch? I rather they hook it up with the interior light dome so there's one switch and it'll look nicer too.
Pics for the rear light pls! Heheh...
|
|
|
|
|
|
kweng84
|
Mar 10 2009, 10:23 AM
|
Getting Started
|
Hi guys, i noted that CPS front piping and about the rest of exhaust piping is 2.2". My eyes went big like goldfish to note that WAJA CPS comes with 2.2" piping. Sifoo-sifoo, please clarify my statement.
2.2" surely makan minyak for >80% city(KL) drivers :S
|
|
|
|
|
|
R.Y.D.E.C.K
|
Mar 10 2009, 10:41 AM
|
Getting Started
|
QUOTE(kweng84 @ Mar 10 2009, 10:23 AM) Hi guys, i noted that CPS front piping and about the rest of exhaust piping is 2.2". My eyes went big like goldfish to note that WAJA CPS comes with 2.2" piping. Sifoo-sifoo, please clarify my statement. 2.2" surely makan minyak for >80% city(KL) drivers :S yup..its true...but for me...the FC is superbs...currently fulltank can go around 500++ ...and it from setapak tmn melati to sri kembangan every morning(revving) n evening jemm at MRR2...plus dinner in bangsar plus ...go round2 after work...fulltank get me almost 4 day b4 feul light blink..mine MT...but once u late service |
|
|
|
|
|
zenwarlord
|
Mar 10 2009, 10:42 AM
|
|
|
QUOTE(kweng84 @ Mar 10 2009, 10:23 AM) Hi guys, i noted that CPS front piping and about the rest of exhaust piping is 2.2". My eyes went big like goldfish to note that WAJA CPS comes with 2.2" piping. Sifoo-sifoo, please clarify my statement. 2.2" surely makan minyak for >80% city(KL) drivers :S I aware the standard piping is huge and all this while was roughly estimating it was 2", never knows it's actually 2.2" until u told us  So what is the internal diameter? 2" ? |
|
|
|
|
|
R.Y.D.E.C.K
|
Mar 10 2009, 10:44 AM
|
Getting Started
|
QUOTE(zenwarlord @ Mar 10 2009, 10:42 AM) I aware the standard piping is huge and all this while was roughly estimating it was 2", never knows it's actually 2.2" until u told us So what is the internal diameter? 2" ? humm yalah u measure it ?i tot osso 2''... 
Added on March 10, 2009, 10:45 ammyb sphiroth can tell as he upgrade the piping oledi...  This post has been edited by R.Y.D.E.C.K: Mar 10 2009, 10:46 AM |
|
|
|
|
|
zenwarlord
|
Mar 10 2009, 10:49 AM
|
|
|
QUOTE(R.Y.D.E.C.K @ Mar 10 2009, 10:44 AM) humm yalah u measure it ?i tot osso 2''...
Added on March 10, 2009, 10:45 ammyb sphiroth can tell as he upgrade the piping oledi... I just use naked eyes to estimate the diameter, that's y my eyes fails to detect the figure after decimal point hahahaha.... |
|
|
|
|
|
R.Y.D.E.C.K
|
Mar 10 2009, 11:14 AM
|
Getting Started
|
QUOTE(zenwarlord @ Mar 10 2009, 10:49 AM) I just use naked eyes to estimate the diameter, that's y my eyes fails to detect the figure after decimal point hahahaha.... dammn man...hahaha..zen,still donno how to do the engage light project...wiring n all stuff..can upah u or not? can caj me wut |
|
|
|
|
|
kweng84
|
Mar 10 2009, 11:26 AM
|
Getting Started
|
*paiseh* I also use naked eyes to see from engine bay, just right after the flexible pipe, the size is 2.2" piping, inlet around 2.1" for galvanized steel material that most new proton using. Hope the cat-con after the header is good quality and don't clog that fast, else, FC buruk.
This post has been edited by kweng84: Mar 10 2009, 11:26 AM
|
|
|
|
|
|
zenwarlord
|
Mar 10 2009, 12:02 PM
|
|
|
QUOTE(R.Y.D.E.C.K @ Mar 10 2009, 11:14 AM) u mean the mivec engage light? ur's is CPS right? is there any indication on the meter when CPS engage? Else need to know which wire is for CPS signal. For stuff i can do for u la but u pay the material cost hehehehe.....wiring i can guide u else u have to come to PG hehehe....
Added on March 10, 2009, 12:07 pmQUOTE(kweng84 @ Mar 10 2009, 11:26 AM) *paiseh* I also use naked eyes to see from engine bay, just right after the flexible pipe, the size is 2.2" piping, inlet around 2.1" for galvanized steel material that most new proton using. Hope the cat-con after the header is good quality and don't clog that fast, else, FC buruk. if it's 2.1" inner diameter means this CPS engine is no joke man....about the cat-con, it's there to meant for removal...so the quality....hehehe This post has been edited by zenwarlord: Mar 10 2009, 12:07 PM |
|
|
|
|
|
R.Y.D.E.C.K
|
Mar 10 2009, 12:27 PM
|
Getting Started
|
QUOTE(zenwarlord @ Mar 10 2009, 12:02 PM) u mean the mivec engage light? ur's is CPS right? is there any indication on the meter when CPS engage? Else need to know which wire is for CPS signal. For stuff i can do for u la but u pay the material cost hehehehe.....wiring i can guide u else u have to come to PG hehehe....
Added on March 10, 2009, 12:07 pmif it's 2.1" inner diameter means this CPS engine is no joke man....about the cat-con, it's there to meant for removal...so the quality....hehehe no lah zen..just tik tik sound...cost?no probs...as long can be done...but can place any LED at behing VDO meter...once cps engage can change light to red,the whole vdop meter change to red...perrrggghhh  awesome...PG?no prob.. later this mei need to went to merbok...sure can meet... 2.1?later lunch time will look n check..no wonder once me or other passenger open door...can hear my bassy ekzos sound |
|
|
|
|
|
norseman
|
Mar 10 2009, 12:31 PM
|
Getting Started
|
Eii... quick question... Will removing the cat-con void warranty?
|
|
|
|
|
|
jctasoga
|
Mar 10 2009, 12:52 PM
|
Getting Started
|
norseman : dun think so. but why u wanna remove the cat con first? wait for the entire setup complete lah..
Added on March 10, 2009, 12:53 pmhoho... the exhaust thread is heating things up again.. woohoo!!
This post has been edited by jctasoga: Mar 10 2009, 12:53 PM
|
|
|
|
|
|
Seng_Kiat
|
Mar 10 2009, 12:56 PM
|
|
|
hey,
long time i din visit this page.
btw, my car is just around 6 months. if you were me, will you service your car at outside (not proton service)?
|
|
|
|
|
|
pearjar
|
Mar 10 2009, 01:09 PM
|
Getting Started
|
QUOTE(kweng84 @ Mar 10 2009, 10:23 AM) Hi guys, i noted that CPS front piping and about the rest of exhaust piping is 2.2". My eyes went big like goldfish to note that WAJA CPS comes with 2.2" piping. Sifoo-sifoo, please clarify my statement. 2.2" surely makan minyak for >80% city(KL) drivers :S Hehe.. Tokey exhaust surprise ekk..  Yap it is 2.2".. I thought u have the extractor for cps, the one that sphiroth use..  If u can build 4-2-1 extractor same pipe diameter as oem cps header with 2.2" outlet, please inform me.. |
|
|
|
|
Quote
0.0182sec
0.39
6 queries
GZIP Disabled