nice u said hehehehehehehee it suck actually take it out urself and look how they mount it

in between nb heatsink and the nb chip is a hot plate for pipe that link to pwm and thats the 1 coz uprising heat

wonder why they called it special cooling

other than that its an awesome f!Cking oc board W00T will smack it on ah soo

This post has been edited by sepulgilo: Jan 26 2009, 10:14 PM

what i drool over is low voltage at higher clocks...which leads to lessss heat !!

This post has been edited by pikacu: Jan 26 2009, 10:50 PM

dfi

yeah dfi yummy

lol.. another recruit.. moar ppl

i need more poison on dfi

DFI

-pWs-

bro pws can racun u till u wanna get it tomorrow morning heheheehehehe

Wuuuuuu.....wut a crazy setup...



This post has been edited by verdict: Jan 27 2009, 02:00 AM


Attached thumbnail(s)

@verdict, need FXB M2RSH poison

anyone with core contact freezer + m2rsh?

that's one of d boards that i would love to put my hands on. 4 mosfets for each phase, d most i've ever see so far. most are just 3 mosfets for each phase, even d great dfi...

hepi chinese new year & holidays to all...

new mild poison for possible new dfi recruits...



w/o air cond...



This post has been edited by ah_khoo: Jan 27 2009, 09:23 AM

i'm jz comparing these...
those v crucial 10th i noe the clock are insane n also the timings...
I tot i can at least get 27.000s...
mayb kinda too greedy of me...
can sumone enlighten me??

This post has been edited by byfc2010: Jan 27 2009, 11:30 AM

try kill some background process, or use AMD Fusion to kill them

as mentioned, other than timin & clock, os tweakin also effects d result of spi. 875 @ 5-5-5-x is kinda low, if u really want better spi result, it's either go > 10xx w/ loose timin or around 900 ish @ 4-4-4-x. spi guru xixo can guide u better on this...


@ bang sepul,

dfi distro in sg offers 3 years warranty...

to all sifu here, i got few n00b oc question:
1. if oc w/o change the voltage, the temperature will increase or not?
2. If i oc w/o change the voltage, is it possible to keep the cool n queit on?
3. Last but not the least, should i increase the multiplier first or the bus speed first?

1. from my test 3.0 vs 3.4ghz on Phenom II stock voltage, the temperature didn't change on idle, not sure on load.
2. IMO, it depends on mobo. Like Phenom II, some says they still can use CnQ when change multi (not htt), while the other says they still can use CnQ when change htt(not multi). And at my case...i can't enable CnQ when i change htt or multi.
During my time using 5000+ BE on TA690G, i still can use CnQ, when i OC using HTT...
3. Play with multi first, after u find your limit using multi, then increase htt to find the maximum limit of your proc at certain vcore..

he he its ok within 2 years dure come out new dfi heheheehehe

anyway im still waiting for you to give me ur ta690

TA690g bole jual berape yer?

first, wait for the system idle, don't be too fast to running SPI 1M, it will take time to load windows first, because this is single application, just put an effort to set affinity at one core only.
be free too make a few run of 16k SPI.. 2 times shud be enough, then run again 1M, remember to make there is no active background process that use ur proc too heavy

if u realize before this, there is some benchies from me that disable one of core ..

1. if there's a increase in clock speed, yes, there'll be increase in temp. i can guarantee u that as higher clock speed leads to higher tdp, even w/ same amount of voltage.
2. rule of thumb in AMD oc, no c&q. so....
3. yup, try to max out d raw clock speed b4 playin w/ htt oc as higher htt leads to limitation of oc headroom.

if i decided to let go of my matx rig, then u'll be d 1st person that i'll offload d board bang...

d guru has spoken....

This post has been edited by ah_khoo: Jan 27 2009, 09:46 PM