I launched the CPU-Z application on my stock rig and found out that the FSB:DRAM ratio not @ 1:1. My question is how do I get 1:1 ratio?



Thanks.

This post has been edited by brendanc: Jan 19 2009, 11:47 AM

In your 3rd photo, change "FSB/Memory Ratio" from "Auto" to "1:1.00". Please make sure your RAM is capable of doing a higher FSB if you decide to overclock.

Oh... why didn't I notice that earlier?

Will my Corsair XMS2 800Mhz be able to handle it? Thinking of OC my proc to 3Ghz by using my stock HS.

hi there,

ur multiplier is 10.... so...

3000mhz (this is ur target) / 10 (multiplier) = 300mhz

ram is 800mhz/2(ddr) = 400mhz

so 300mhz < 400mhz. ur rams should be able to handle it if u set ur ratio to 1:1. in fact, its not even stressed at all.

Thanks tesla! I am still reading thru all those OC guides.

I don't think OC my proc to my 3GHz is even stressing anything... it's puny compared to what you and many oclockers have done to their proc.

But I guess I should take it one step at a time.

As per clawhammer said, select 1:1.0

Please use the pinned threads and/or the search function before opening a new thread.

//Closed