mind sharing the spec of the 3M tint, esp the infra red rejection?

at the same time, TS might want to add in some more reference

http://asia.vtec.net/Engines/LSERIESG2/index.html
(might give a rough idea how much new city's km/l)

and some review
http://asia.vtec.net/Reviews/3GCityFirst/index.html

tillerman,
thanks for the feedback!
tint
it could be the vkool installation was not really proper, causing the heat not rejected well or the tint is yet to be fully functional ?

FC wise
we should be looking at 18km/L, at least... (referring to TOV's technical review of L15A)

hi guys,

since some of us already receiving NHC and some are still waiting, i guess one thing we as new owner need to decide on tinting. based on feedback i've seen here :

vkool quality degrading (some case)
vkool getting rusty stain after 5 years (found feedback in other forums)
therefore, asking you guys on the tinting choice you had planned.

what i have here

vkool elite (94% infrared rejection) RM2200 (quote by SA)
vkool elite (94% infrared rejection) RM1950 (quote by one forumer here)
ecotint raybarrier (95% infrared rejection) RM1500 (quote by one forumer here)
3M safetint (99% infrared rejection) RM2000 (based on ZeroSP input)

i'm looking at ecotint, but also wanted to know other brand like rikecool, aircool and etc.

is there any other option to be considered?

AAM also have something like captor, named Smart tracker.

AAM Smart Tracker - RM1728 ( GPS ) ( annual fee RM270).

There are few pros and cons of GPS, GSM and RF, but if have money, can take the Captor RF/GPS/GSM.

GSM gives u a pinpoint accuracy but depending on telco signal
RF gives better coverage but not pin point accuracy, (need a ground patrol with homing devices)
GPS? according to AAM brochure, 5 meter accuracy, but haven't read about GPS signal coverage.

rm1300 for 99.7% heat rejection? for all 6 windows, using CR70? that is really cheap....even better bargain than the ecotint ray barrier.

should have arranged for a group tinting discount, and a recommendation discount for you la ZeroSP

---

Added on February 5, 2009, 1:52 pmmalaccan as well. but not the owner, my wife is. still waiting for her E-spec PMM.



This post has been edited by keii-kun: Feb 5 2009, 01:52 PM

if it is the original modulo, abs material. rm2000++ is worth it i guess...considering the material is ABS...