Melaka ocers club, For all the overclockers in Melaka
|
|
 May 28 2009, 08:47 PM
|
 
Senior Member
6,439 posts Joined: Oct 2008 From: Mlc to PP ?   
|
QUOTE(OC4/3 @ May 28 2009, 05:25 PM) Intel board is no where tune for oc actually thx~ But if you persist,try BSEL mod and clockgen/setfsb   haiz ... |
|
|
|
|
|
May 31 2009, 01:55 AM
|
Senior Member
2,369 posts Joined: Aug 2008
|
QUOTE(*-a|i3n-* @ May 28 2009, 01:09 PM) i not really pro in oc-ing...i also just quite new on oc...but this is what i hear my my buddies....intel board cant oc...suggest u to get some nice brand mobo. like asus, dfi, gigabyte for oc...and a nice heatsink too.. I`ve lapped a p4 before... by the way...wanna ask...anyone at here know how to lapping? i not very sure on the guide on lyn...wanna see the real lappin progress xD most guides will suggest sand paper, but I used a knife sharpener instead. The kind of flat batu asah type.. 1. Get ready a damp cloth 2. Wipe the HS and then `asah` it 3. Do the same with the proc, still, damp the silver part just slightly, not too much. 4. Apply even force until it becomes like bronze For HS, lap until even can ady |
|
|
Jun 3 2009, 06:14 PM
|
Senior Member
1,239 posts Joined: Oct 2005 From: Malacca
|
anyone knows where to buy lga775 bolt-thru-kit in Melaka?
|
|
|
Jun 4 2009, 02:01 PM
|
Senior Member
681 posts Joined: Nov 2006 From: Lowyat.net Malacca Status: Ultra Active
|
QUOTE(shaun3230 @ May 31 2009, 01:55 AM) I`ve lapped a p4 before... ic...normal sand paper will do?most guides will suggest sand paper, but I used a knife sharpener instead. The kind of flat batu asah type.. 1. Get ready a damp cloth 2. Wipe the HS and then `asah` it 3. Do the same with the proc, still, damp the silver part just slightly, not too much. 4. Apply even force until it becomes like bronze For HS, lap until even can ady QUOTE(onimusha_m16 @ Jun 3 2009, 06:14 PM) anyone knows where to buy lga775 bolt-thru-kit in Melaka? can try go to pc spec in bukit beruang. at there maybe got. |
|
|
Jun 4 2009, 10:24 PM
|
|
Senior Member
2,369 posts Joined: Aug 2008
|
QUOTE(*-a|i3n-* @ Jun 4 2009, 02:01 PM) ic...normal sand paper will do? Can, but then u must warp it in an even thing like wood, etc, so leceh la..can try go to pc spec in bukit beruang. at there maybe got. If u use sand paper straight, later u lap wont be even |
|
|
Jun 8 2009, 06:48 PM
|
Senior Member
549 posts Joined: Sep 2008
|
i'd lapped my AC Alpine 7 heatsink few months ago..
using normal sand paper, from low grid to high grid.. still shine though.. got 2C cooler from 40C to 38C on my Q6600.. anyway, i just got a new mobo, MSI P7N SLI Platinum.. and i have no idea how to OC my Q6600 on this mobo.. i tried some adjustment, but fail..  they said it was easy to OC on this board..  got any advice guys? This post has been edited by nas06: Jun 8 2009, 06:51 PM |
|
|
|
|
|
Jun 8 2009, 08:06 PM
|
 
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
What ram you using? What speed? What timing?
1. Put FSB:RAM to 1:1 1st. 2. Slowly increase FSB. 3. Stress it using LinX/Prime95/IBT. 4. If stable, increase FSB again. 5. Repeat Step 3. Do bear in mind that Q6600 is hot. -pWs- |
|
|
Jun 9 2009, 09:05 AM
|
|
Senior Member
549 posts Joined: Sep 2008
|
for the time being, i'd to use Kingston Value RAM 667MHz 1GB x2
i know my Q6600 will become hot.. at least my new cooler take care of the prob.. |
|
|
Jun 10 2009, 01:14 PM
|
|
Senior Member
2,369 posts Joined: Aug 2008
|
QUOTE(nas06 @ Jun 8 2009, 06:48 PM) i'd lapped my AC Alpine 7 heatsink few months ago.. Relatively easy...using normal sand paper, from low grid to high grid.. still shine though.. got 2C cooler from 40C to 38C on my Q6600.. anyway, i just got a new mobo, MSI P7N SLI Platinum.. and i have no idea how to OC my Q6600 on this mobo.. i tried some adjustment, but fail.. they said it was easy to OC on this board.. got any advice guys? QUOTE(-pWs- @ Jun 8 2009, 08:06 PM) What ram you using? What speed? What timing? His ram is 667, so I recommend unlink it. If not cannot oc1. Put FSB:RAM to 1:1 1st. 2. Slowly increase FSB. 3. Stress it using LinX/Prime95/IBT. 4. If stable, increase FSB again. 5. Repeat Step 3. Do bear in mind that Q6600 is hot. -pWs- QUOTE(nas06 @ Jun 9 2009, 09:05 AM) for the time being, i'd to use Kingston Value RAM 667MHz 1GB x2 Set FSB to 1333, vcore at 1.35, unlink ram, that`ll get u stable at 3GHz,i know my Q6600 will become hot.. at least my new cooler take care of the prob.. Btw, MOC members, I got this pm: QUOTE Hi, This post has been edited by shaun3230: Jun 10 2009, 01:14 PMPlease log in to www.gatumdale.com to try your luck to win a Huntkey 80 MASTER PSU. Please introduce to your OVERCLOCKING KAKI Thank you. Regards, BONG |
|
|
Jun 17 2009, 12:42 AM
|
Senior Member
1,184 posts Joined: Jun 2008
|
all from melaka?..any from mmu ?...lol
|
|
|
Jun 17 2009, 04:00 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(shaun3230 @ Jun 10 2009, 01:14 PM) His ram is 667, so I recommend unlink it. If not cannot oc What do you meant by unlink?Not 1:1 the lowest divider? -pWs- |
|
|
Jun 20 2009, 12:43 PM
|
|
Newbie
3 posts Joined: Jun 2009
|
|
|
|
Jun 21 2009, 08:00 PM
|
Senior Member
1,204 posts Joined: Feb 2009 
|
anyone have the stygix price list?
|
|
|
|
|
|
Jun 21 2009, 10:48 PM
|
|
Senior Member
681 posts Joined: Nov 2006 From: Lowyat.net Malacca Status: Ultra Active
|
QUOTE(Kal-el @ Jun 21 2009, 08:00 PM) anyone have the stygix price list? http://www.navotech.com.my/pricelist.pdfAdded on June 21, 2009, 10:49 pm QUOTE(cris99 @ Jun 20 2009, 12:43 PM)  dont understand what u mean...are u trying to making some entertaiment over here?  This post has been edited by *-a|i3n-*: Jun 21 2009, 10:49 PM |
|
|
Jun 22 2009, 04:34 PM
|
|
Senior Member
2,369 posts Joined: Aug 2008
|
QUOTE(cris99 @ Jun 20 2009, 12:43 PM) Yeah, dont quite get u as wellAdded on June 22, 2009, 4:36 pm QUOTE(-pWs- @ Jun 17 2009, 04:00 PM) What do you meant by unlink? Most SLi mobos can unlink it... And his is 750 SLi, mine is also 750, but its an Asus P5N-DNot 1:1 the lowest divider? -pWs- This post has been edited by shaun3230: Jun 22 2009, 04:36 PM |
|
|
Jun 23 2009, 02:58 AM
|
Senior Member
1,406 posts Joined: Jun 2007
|
what about a TT for malaccan ocers?at least when we are lurking around melaka can see each other and at least, wave a lil bit n say hi. n what utmost important is, makes more friends.
|
|
|
Jun 23 2009, 04:05 AM
|
|
Senior Member
681 posts Joined: Nov 2006 From: Lowyat.net Malacca Status: Ultra Active
|
QUOTE(alive88 @ Jun 23 2009, 02:58 AM) what about a TT for malaccan ocers?at least when we are lurking around melaka can see each other and at least, wave a lil bit n say hi. n what utmost important is, makes more friends. i shy le |
|
|
Jun 23 2009, 10:27 AM
|
|
Senior Member
1,406 posts Joined: Jun 2007
|
me shy too
come on guys.. we meet up this july.. anybody agree? |
|
|
Jun 23 2009, 08:40 PM
|
|
Senior Member
2,369 posts Joined: Aug 2008
|
QUOTE(*-a|i3n-* @ Jun 23 2009, 04:05 AM) i shy le DOnt be  QUOTE(alive88 @ Jun 23 2009, 10:27 AM) me shy too No prob , but where u have in mind? And also, day and date?come on guys.. we meet up this july.. anybody agree? Hopefully more ppl can come.. |
|
|
Jun 23 2009, 11:11 PM
|
|
Senior Member
1,406 posts Joined: Jun 2007
|
supposedly on weekends for sure..saturday would be a good choice.. date most probably in mid July, and place..hmmpp... DP or MP should be well known to us Malaccan rite?
|
| Change to: |  0.0289sec
 0.41
 6 queries
 GZIP Disabled
Time is now: 7th December 2025 - 03:45 PM |
Quote