Why not?

Sorry, was busy, can u guys pm me to have you name in there?

How about this template:

username| proc| gpu

Pls tell me if u have a better suggetion.

Btw did anyone went to the pc fair l?

hello melakarian...melaka people here!!

wanna ask somtin la..got any idea ka how can i OC my pc?..coz got some problem here la...

ok here my spec C2Q9450 + P35-DS3 + DoMinator 4gb 8500 + GTS250 + gigabyte super720..

ok last time im using the same spec but diff gc which is HD4850...i just OC the Proc to 3.2ghz & 430mhz for RAM at stock voltage & got no prob with it...my pc run smoothly...

but now when i change the GPU...i can't set the proc to 3.2ghz & ram to 430mhz...why eh...is this about psu matter?...this gc use 1 pcie too ma like 4850 =.=||..

confuse meh...izit about the PSU or others?..

can any1 give me suggestion?...thx!

appreciate all ur help

This post has been edited by kilowatt: May 3 2009, 11:34 PM

What else you change?

If cannot, start from zero and overclock again.

-pWs-

im not changing anything else lo bro =.=||...

i just change the cpu speed to 400x8 and ram to 960...

i dun understand much about voltage...thats y i not try to change it ...

Whats ur CPU cooler? For ocing, u need to increase the CPUs voltage slightly by slightly. Same applies to ur ram, NB and SB

so long not looking into OC. becoz not using desktop anymore

back to topic.


yerp voltage need to adjust slightly to support ur proc n ram. (by using good cpu)

n then test the stability.

I think, firstly, u need a good cooler to increase the voltage. Secondly mobo must be good, having lots of ocing opitions and voltage diff increases very small.

Dont forget PSU too

Hi all, I am from Malacca too. Currently building a water cooling system to cool down my proc due to overclocking.

im using Red Scorpion by Xigmatek + crossBow kit.....i oredi up the voltage from stock until 1.325...=.=...still the same...

Nice, what sort of WC. But as told by other Malacan ocers, if u get a cheap aio kit, it`ll just deliver the performance of a high end HS

Try 1.35-1.37, stable at 3.11Ghz on my system. Also at 3

hellooo melakariannn!!...wanna share sumtin...lol

yeahh i can OC to 3.2ghz back...i try to tweak on RAM timing & voltage sumore...hehehe...thx to bro asamkipas...help me much on this...

my voltage is 1.27 ...

btw i try 3.36ghz...done running 3dmark06 without prob...but cant run OCCT high priority...only last for 4 seconds....tried 3-4 times..still 4 seconds then errors at Core 2....another test error at Core 1...lol...dunno la...plus not stable..

but successful run 7hours 5minutes OCCT high priority + large data set at 3.2Ghz....5 minutes coz on 1st 1minutes it turns to idle & last 3 minutes too...kekeke...so should be 7hours 1minutes tested ...

yeahh...satisfied with my result for now...maybe wanna go high when buy new mobo...hehehe

yeahh!!!

@kilowatt
hint...
1. up your vnb one notch.. and try again.. if failed up again one notch and so on... don't set to much else u'll fry ur mobo w/o adequete cooling on nb...
2. your fsb/mem strap... maintain your mem freq nearest to 1066MHz 5-5-5-15 2.1V

have fun.. don't fry anything on d way....

This post has been edited by campsol2k: May 9 2009, 12:15 AM

WOW ur hint too pro le...i dunno much yet la bro..

btw wut is VNB bro?...hahahha...sorry for da noob ques ya...im slow in learning right now...

ya i wanna make it 1006 with 5-5-5-15 timing...but dunno how to make it 1006 coz its like oredi set the speed le -.-...dunno how to say leee lol ....

btw thx for da hint bro !

This post has been edited by kilowatt: May 9 2009, 12:16 AM

just want to help. u'll understand it later on in time...
take it slow... OCing requires patient.
VNB = northbridge voltage...
owh.. another hint.. 4got to mention vFSB/CPU VTT... increase one notch at one time... don't go higher than 1.4V.. else it will kill your proc..

This post has been edited by campsol2k: May 9 2009, 12:27 AM

Bros any idea how to make my GC more stable? I am using Nividia 8500gt and using Rivia Tunner to oc it.

I max the core clock and shadder. But sometime folding still fail. Any idea how to reduce the error? I try to reduce and increase both core clock and shadder but still sometime error. Any exact value?

thx again campsol2k ...

yeah will try to go higher...but wanna change mobo 1st le =.=||..

thx again ya

nvidia 8500GT?? is it older version of GC??

at my time 1 year ago, i'm using HD4870 512MB DDR4 2 slot

most people just OC their proc n ram only...

dude, try not to oc ur GC,i spoil my 1 GC before,i miss my 9600GT

This post has been edited by *-a|i3n-*: May 9 2009, 10:11 AM

Oh really? How did you burnt your GC? I remove the original cooler and change to better air cooling for my GC.