Tried to search for some tips in applying Bodyguardz but could not really find any good ones....

Heard of soaking the skin super wet with the application solution or baby soap water? using hair dryer? Nail clippers?

I've tried them and they don't give satisfactory result...

SO..... i suddenly have a funny thought and try to do it... and.... it WORKS!! HOW??

STEP 1: THROW AWAY THE APPLICATION SOLUTION

STEP 2: Make sure your iPhone surface is clean... blah blah.... i wore glove while cleaning it with the microfibre cloth... it helps reduce fingerprints..

STEP 3: (Remove gloves for this step onwards) Use CELLOTAPE to wrap the ends of your fingers... they helps to reduce marks on the skins compare if u use your bare hands..

STEP 4: DO NOT PEEL THE WHOLE SKIN OFF from the paper .... Peel the volume control side skin.... peel only a quarter portion of the whole skin... so that the other parts are still stick to the paper... (you will have less problem getting your fingers on the other parts of the skin) Start with the volume control side (last time i started off with the camera hole and it really is difficult to align)... Slowly, using the squeegee.....squeegee to the other part of the iPhone....(while realeasing bit by bit skin from the paper)..... the skin was align perfectly:hyper:

STEP 5: With careful fingers, stick the sides of the skin carefully.... because it has no solution... the edges (especially round edges).... sticks much better!!!!

After those steps.. i don't see any popping out edges.... but after a while i do see only 2 super tiny pop out at the round edges... but i just stick them back down...since it's so tacky...

VOILA! I'm definately going to use this method again if I should need to change my Bodyguardz (not) in the near future








This post has been edited by runner999: Jan 10 2009, 10:07 PM

You are welcome!

I'm so much happier now with this method...and for me, it is so much less frustrating!

no high resolution la... my camera very old model one... hehe... anyway, posted some pics... hope you all can see the round edges part.... FYI, no need to switch off iPhone for 12 hours...hehe..

err... just peel it off

---

Added on January 11, 2009, 9:30 pmThanks bro ... hehe... ya, speaker part i din pull a bit.... but happy with the corners... my first application using the solution was a disaster

This post has been edited by runner999: Jan 11 2009, 09:30 PM