i planning to make a hole to install full funtional rear wiper but until today i still can't find shop can do that. My wiring and controller for rear wiper is all done.

---

Added on February 10, 2009, 12:56 pm

yes u can DIY. Open up the cap on the wiper and tigthen it back, but before doing so, i suggest u to pull out the wiper and place it properly according to the track before tighten it. Mine also loose as the track is rounded.

I n my friend went to few glass shop before n all suggest me to buy a rear glass precome with hole..but i don't know what type of glass my friend bought

completed my Diy fiber project.. front splitter..

Any waja cps owners want to swap their rims with me?
I'm letting go my lenso samurai at rm650 with your rims..
Or the same design as waja cps rim from older version waja also can. But must good condition..

the nearest immigration dept. from your are is the one located at damansara.
maybe you could try the new DUKE highway.
else, check out google map and type the direction on how to go to Damansara Immigration Dept from your area. 
just renew mine at Putrajaya Immigration Dept,  btw.

Hi all,

my waja bonnet lip already tertanggal, thanks to proton poor design on the molding gate broken at the place where it was tighten to the bonnet.

where can i buy a new one?

attached circle in red is the pix of the part i am talking about.

wait for my product.....i have it.

---

Added on March 8, 2009, 1:25 pm

width is different.
215 is wider.
ok...here is my mivec light project...My camera do not have nite vision, so too dark hehehe.

i dunno why, i just broke and sprung out. initially i tot it was metal piece, but when i open up the bonnet and see...damn, it was a plastic moulded part with very small and fragile molding gate!!! damn pissed off...i think the heat from the bonnet cooked the plastic and made it crack, my car one year plus oni....

Fixed (on behalf of zen)

---

Added on March 8, 2009, 1:53 pmok...here is my mivec light project...My camera do not have nite vision, so too dark hehehe.

about 4 months. rear tyres. 195/55/R15. suspension ok. seldom carry weight at the back.
mileage covered under 2850km which is consider very less.
tyres pressure pumped accordingly. check every week.
yesterday check the thread with a 20 cent coin and the word 'sen' can be seen already.
btw, sometimes my rear tyres 'drift' during corner  :due to my driving style. could it be the culprit? 

Guys...good news for u all...

Actually im helping Eagle Eye Malaysia..

Cause im looking for Light Smoke M5 tail lamp like the pic below...not Full Smoke...is Light Smoke
but they said now stop prodcution...

and if i can get 10sets....confirm buyer...then they will go for production...and this is limited version...not like the red/smoke color...

So do pm me if u interested....no need deposit....but just gv a confirm.....The Product Will come out around JUNE 09
Now i got 2 buyers d

Thanks for your help, I found an earlier post where someone sprayed their side mirror - http://forum.lowyat.net/topic/900200/+280# - will go check out Ace Hardware and such or just go bring to shop.

If it happen to mine, I would use CF sticker. Make it look like a CF part.

stock is the most comfortable? my friend often complaint about it whenever i do a sharp corner with my waja
and this is the adjustable spring im talking about

if ur aiming for 300-400 just for springs.. go for R3.. those set sure gives u comfort and good in handling.. plus lower car also.. topup more buythe R3 abs also.. best combination..

i'm having problem with my car.. on 3rd gear climbing 90km/h.. my car suddenly being pulled abit by bit.. its like the car is jerking.. its almost like being pulled behind.. always happen when i its about to reach 90km/h and the gear about to change to 4th(auto).. anyone know whats happening? gear problems?

hmm.. heard alots of people saying there is not stock.. but few people are selling in the automotive garage..
if u guys wanna get those springs.. try looking for SAPURA brand.. its the same.. R3 just rebranding their stuffs..
hehehe.. got meh.. waja R3 abs is actually same like stock.. but its abit hard so if u fix it with R3 springs it would be a good setup..
i'm using R3 springs with stock abs currently.. but waiting my gaji to come out to hunt for the abs..
now they said all R3 stuff are out of stock.. maybe coz the rumors of R3 gonna stop production for waja is ture..
btw.. R3 abs is also SAPURA product.. and its hav cheaper price compare to R3 stuffs..
hmm.. the thing is..i've just service my car a week ago.. also did ATF change.. something going on under the hood but i can't detect what izzit..

---

Added on March 28, 2009, 10:58 amhttp://www.mudah.my/absorbercoil-spring-selangor-1638570.htm?ca=8_s
example.. these are for wira.. but these is the R3 abs and springs

Guyz any idea where i can get the gear lever lock that look like this

That's why..I ronda2 accs shop also very hard to find 1

Still no reply from that fella ar bro