the nearest immigration dept. from your are is the one located at damansara.
maybe you could try the new DUKE highway.
else, check out google map and type the direction on how to go to Damansara Immigration Dept from your area.
just renew mine at Putrajaya Immigration Dept, btw.

dude u can go to sri rampai...setapak..u know jaya jusco alpha angle??wamngsamaju?...onli few junction from JJ...renew mine there...onli take 3 hour....if u lost..ask ppl the...its quite big the office...near selangor pewter n SRI Garden intr. school..

DAMANSARA office osso can...near wut from ur area...n u can use this too..wikimapia.com\kuala lumpur..

This post has been edited by R.Y.D.E.C.K: Mar 6 2009, 11:01 AM

Thanks guys, found it on my GPS.. I spell wrongly on GPS that's why cant get it. iMMigration, i always thought it's iMigration..

One question again, my car's tires, weekly check it's air pressure, always reduce 2KPA each tires although i pump every weekend.
My tires age around 1 year 9 months.

It's very normal for aged tires. It also depends on your rims actually, whether there is leakage especially when you have added pressure if you
go through pot holes. I use to have a rim bent out of shape, only that particular tyre with that rim will leak alot of air a week.

My rims all are in good condition, checked during last alignment and balancing.. Guess is the age of the tires..
Time for 17 inch

err... strange question here, what brand was the timing belt that comes standard with new Waja 4G18 back then?

Hello Wajarian,

My cigarette lighter not working. I know I should check the fuse but I can't seem to located it. Any advice? Thanks.

Subaki. Japan made.

---

Added on March 6, 2009, 9:29 pmfuse for the cigarette lighter is inside the dashboard driver side to the right of the steering wheel. u need to open it from near the kickpanel of the right door. pull out and upwards to remove the clips of the lower part of the dashboard

This post has been edited by laytiong: Mar 6 2009, 09:29 PM

thanks a lot
btw, rm85 for engine oil change / service. including semi synthetic oil. is it expensive?

Depend. If it's castrol or petronas considered ok.
Mine Idemitsu semi cost me RM95, not including filter.

---

Added on March 7, 2009, 12:04 pmFuse box at engine compaetment.Next to battery

This post has been edited by b48753: Mar 7 2009, 12:04 PM

mine eneos 10w40 + oil filter + labour = RM107 i thought cheap alraedy

Lacking power....Even climb hill also hard....Please save me and my car...

jackyleo, wats the problem?

how old is ur car?

have you serviced ur car recently?

what have been serviced?

let us know ur car history n we should be able to pinpoint some solutions for u.

My FC report campro Auto

Before exhaust system 9km/L
Now after 3 weeks run in 10.4KM/L

I just bought this can from my friend... So I change all the necessary parts... And that doesn't seems to solve my problem... Alternator can cause lack of power also?

I would like to ask about waja's brakes.
I would like to change the disc brake, or probably the calipers also, but which brand would suit best for waja?

Is it possible to move the front disc to the rear?

i'm not actually too sure about alternator causing power loss while driving. best way is to check the battery voltage during start up and while the engine is running. another tell tale sign if your alternator is weak or not charging is during the start up of car. you will feel its harder to start the car with a weak battery.

wat other parts have you 'necessarily' changed?

---

Added on March 8, 2009, 7:54 amnope dun think its possible. front is for front. rear is for rear.

This post has been edited by jctasoga: Mar 8 2009, 07:54 AM

Sold the rim, now planning to buy the same brand (TREND) rims with PCD114.3, windows shopping yesterday found the rim Priced RM1580.00 . its sound expensive, plus RM1.2k for tyre, ouch! thats gonna hurt me bad

by the way, what the difference for 17 tyre 205 and 215? can use in the same rims?

This post has been edited by blackmachine: Mar 8 2009, 09:26 AM

Hi all,

my waja bonnet lip already tertanggal, thanks to proton poor design on the molding gate broken at the place where it was tighten to the bonnet.

where can i buy a new one?

attached circle in red is the pix of the part i am talking about.



Attached thumbnail(s)

wait for my product.....i have it.

---

Added on March 8, 2009, 1:25 pmwidth is different.
215 is wider.



ok...here is my mivec light project...My camera do not have nite vision, so too dark hehehe.









This post has been edited by zenwarlord: Mar 8 2009, 01:57 PM