a good mobo and a nice cooling would do the trick.
sarahlah, malam ni kasi 3.6ghz terus!
Nvidia GTX 200 Series Overclockers, GTX 260,275,280,285,295 OCers ROLL IN
|
|
 May 6 2009, 08:58 PM
Return to original view | Post
#1
|
 
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned   
|
|
Quote|
|
|
|
|
May 7 2009, 01:36 AM
Return to original view | Post
#2
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(nncl @ May 6 2009, 11:39 PM) nibitor can do that , maximum can set it to 1.8v , ati card i dont know 1.8v is a bit to high for a 55nm cards. Ati 55nm cards uses more or less around the same Vs like the green counterpart (4850 - 1.158v, 4870 - 1.25v)Added on May 6, 2009, 11:40 pmpls refer to my guide  QUOTE(sarahlah @ May 7 2009, 12:12 AM) yerp confirm can.. but palit bios oni have 3 entry whereas urs is 4 (refer 2nd pic).. hoho.. 1.8v anyone ?  QUOTE(-pWs- @ May 7 2009, 01:02 AM) Our card can do this softmod? Unlike the NVIDIA reference design which uses a Volterra voltage regulator, Palit has chosen to go with a Realtek design which is probably a lot cheaper. Unfortunately this means that there is no software voltage control possible because the controller chip has no I2C interface which is required for communication with the host PC-pWs- exerted from http://www.techpowerup.com/reviews/Palit/G...c_216_SP/4.html |
|
|
May 7 2009, 01:58 AM
Return to original view | Post
#3
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
sarahlah missed that one, referring to him actually
 |
|
|
May 7 2009, 02:45 AM
Return to original view | Post
#4
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(bryanyeo87 @ May 7 2009, 02:38 AM) apasal takut, pencil boleh mar, or even a soldering iron, the real man's way lol pencil ar ? later over kaboom i sense 1.4v should get say, 1k on core? QUOTE(bryanyeo87 @ May 7 2009, 02:43 AM) bila mau LN2 with me man u got lubang for LN2 ka ? how about Liquid He ? |
|
|
Nov 13 2009, 04:24 AM
Return to original view | Post
#5
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Here's my entry with my palit gtx260+
|
|
|
Feb 22 2010, 01:58 PM
Return to original view | Post
#6
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(Rojak44 @ Dec 20 2009, 03:10 PM) hows the temp after changing the thermal paste bro? any significant drop in temp? I would say around 5c-10c depending on how good the cooler dissipates the heat |
| Change to: |  0.0200sec
 0.77
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 03:11 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.