i mean when i oc higher thn the current clock when running 3dmark06 got flickering

current 1 is stable

hows ur card temp with tht setting?

tday hand realy itchy so main main with my card's vcore and bios again

increase the extra vcore to 1.15v,the highest i can go

and viola here am i @ 725/1170/1480

i dunhav any problems with any of the benchers .but got a few times with vantage after complete test it will hang,then adobe flash error will come out banyak annoying 1,need to rerun the test

i always set fan speed to 90% now.currently idle @ 46c

hehe maybe the current IS the max edi.i was hoping to set the vcore higher maybe like 1.16 or higher,but 1.15 is the max i can do.other amp2 users here what are ur max vcore for extra?

This post has been edited by ZeneticX: Apr 28 2009, 04:39 PM

mine is already the overclocked version

pictar says it all .this time even lower lolz,my area jz rained and my room is chilly



didnt hear any sound at all,my case fan sound alone is enough to cover it

believe it or not,there's in deed some ppl who oc gtx260 216 to 780mhz abv on core but for the temps i cant imagine la

btw nncl u're using amp2 as well rite?what the vcore setting for ur extra VID?

This post has been edited by ZeneticX: Apr 28 2009, 08:04 PM

i dun think they are using any aftermarket coolers...bcoz i spot those clocks earlier this year around feb - march like dat.aftermarket coolers dun even exist for gtx200 series tht time

btw nd to noe ur voltage settings

is that the max u can go?

can share ur bios?

btw i heard the already extinct and noobier gtx260 192 is even better for overclocking

extract it using gpu-z and save it as rom or extract using nvflash backup (preferred)

btw here it is,gtx260 192 thou

http://www.techpowerup.com/gpuz/aash6/

erm i dun think attachment gonna accept it.jz upload it to a file sharing website

run a benchmark and see how it goes tech_frix dun forget to post the scores here as well

btw nncl i did a comparison between my bios and urs,it seems tht my 2D have higher clock and a bit higher voltage ,and u can rise bout 0.01v more than mine in evry vcore



left is urs and right is mine

This post has been edited by ZeneticX: Apr 28 2009, 09:00 PM

haha but takut leh straight flash 730 core into my card macam let a baby drink beer

maybe i will reset it to stock speed but keep the voltage

i have some problems with my cracked evga gvt currently,after i pull the bar to my desired mv i press apply then it will jump back to 1000mv (default) maybe its some issue with my beta driver

VDDC current 76.5A ? thts hell lot.is it because of the custom tri fan cooler?

mine is only like this



gtx260 with stock cooler overclocked to *see sig*

tht ss is taken when idle

This post has been edited by ZeneticX: Apr 29 2009, 04:10 PM

oh ok my mistake since u bring up this issue of the VDDC temp i gonna test mine as well now.i nvr paid to much attention to those 3 temps

---

Added on April 29, 2009, 5:29 pmbtw wan to ask is it normal to see flickering during the benchmark test of furmark?i ran it and once it comes into 2 min mark flickering start to appear

This post has been edited by ZeneticX: Apr 29 2009, 05:29 PM

btw nncl i already flashed ur bios into mine minus the clock settings,which means i reset them to default but keep the voltage setting.tried another oc just now but didnt went good,so yea i guess im done with my card

so if any artifacts,flickering appear during the test i should take notice of it or just ignore it?

i will get it frm u when i have the sudden interest to oc agn .right now im happy with my clock

btw y u can set ur voltages so high?my highest is only 1.15 ,jz nw i tried ur bios and the highest also only can reach 1.16

This post has been edited by ZeneticX: Apr 29 2009, 06:52 PM