My one work fine, but just dunno why when my ps3 connect to wifi , my wifi signal about 5min or 10min will lose just dunno why got this happen and then i use my ipod touch detect again then signal also lose, i need switch off my ps3 wifi connection then my linksys wag54g2 working back wifi

Get the new firmware..
Works like a charm
V1.00.17

---------------------------

scratch that..
still useless after 1 day turned on

This post has been edited by ChingChong: Jul 12 2009, 01:47 PM

Before u bought anything pls google and check the hardware revision don't assumed everything is good as it's brand :-)

Example Linksys WRT54G they are so many versions of it and the most fakap version is ver 7. Due to so many popular mod for the router they decided to change the hardware inside it in newer version and until now only GL can support 3rd party firmware. Most new release have RAM limitations and fakap features.

For the modem i don't prefer all in one. I have been using AM300 for almost 7 years running 24/7 and no issues at all with my 1.5 Mbps and now 4 Mbps .

a week in usage and so far no problems at all (at least all the problems mentioned here)..keeping my fingers crossed.

I also have no problem with the product. I just updated the firmware to 10.00.17, Annexe A, and works like a charm.

BTW, I hang/clip (vertically) the product to the back of my loud speakers . Very stealth, and it still gets hot, but seem to be less hot than when I put it horizontally.\\

But, last 2 months, I got bad international connectons, after 2 days. traceroute showed, there were lots of packets lost within international gateways. But, local sites connections were superb, no lost at all. Also, there were problems with DNS, and now everything just running perfectly,



This post has been edited by bahathir: Jul 18 2009, 10:20 AM

i also have the same product and so far it works perfectly for already 4 days. bought it on 15/7 & no problem at all. i wonder why this happened as i only use old firmware 100.10 actually. modulation currenltly set to multimode and also encapsulation set to PPPoE. what's the problem actually ? btw, want to ask ? what is the button at front panel which shows 2aero like "kitar semula" ?

This post has been edited by valve: Jul 18 2009, 12:51 PM

Me too, had been using WAG54G2 for 3 days, updated to latest firmware and so far no problem for both wired and wireless connection. The 'recycle' button is actually Wifi protected setup, but i used manual configuration for setting secured wireless connections i.e.: WPA2 with MAC Address filtering.

This post has been edited by vchenv: Jul 18 2009, 04:16 PM

oic. i also did the same thing. configured manually for wi-fi protected. anyway, should I update the firmware to the latest as i do not have any problem at all at this time ? let it or update ?

If i am not mistaken, the latest firmware should make the modem more stable. Initially, i used also the 1.00.10 but updated it after reading Linksys WAG54G forum as recommended by the technical specialist.

where can i get the latest firmware? i went to the linksysbycisco site but there's no latest firmware there.

here !
btw, it is risk to update to the latest firmware ? if it will make my router more stable, i will do so.

This post has been edited by valve: Jul 19 2009, 11:34 AM

For me, so far no problem after updated. Most important is to ensure no interruption during updating.

Disaster for me after bought this modem..After updated to 1.0.0.17 firmware the modem shutdown automatically. After that there is no ADSL signal. Have to call TM to reset the port. Now install back 1.0.016 but havn't try again. Using old router now...ZZZ

This post has been edited by themole: Jul 21 2009, 01:45 PM

i go the linksys website i only can see 1.0.0.16 firmware , but how come your guy can find 1.0.0.17?

Perhaps products defect? Today, in Serdang, there's streamyx disruption. No ASDL light but after a few hours, it was back to normal.

Its here:

http://www.linksysbycisco.com/ANZ/en/suppo...AG54G2/download

06/05/2009
Ver.1.00.17 (Annex A)
Download 4.00 MB
(Firmware)

Yesterday i tried to connect, it successful. All back to normal..I have a question here. Is that this model has RAM/NVRAM inside?cos everytime i reboot i can c d time is 01/01/1970.

My advise..better download firmware from malaysia website...1.0.0.17 might not work against streamyx..(my opinion la...correct me if im wrong.)

3 weeks 24/7 on, no problems at all with 1 pc cable connected, 1 pc wireless, 1 laptop wifi..

it sucks... i end up using my old dlink... its ok at first...

I had the same problem. My Apple iPod Touch could not connect to my new Linksys wireless WAG54G2 modem / router.

My other devices worked fine (PC with DLINK DWA-110 USB Wi-fi and HTC Magic phone - with Android OS).

Trying to get the iPod Touch to connect, on the router I tried all the security protocols and changing passcodes. Nothing worked.

THEN, I changed the WAG54G2 router from the default wifi channel of 11 to 9....and the problem was gone. Immediately.

It looks like the channel 11 on the Linksys WAG54G2 and the channel 11 on my Apple iPod Touch do not align closely enough to get connected.

This may also be true for other devices. Try another channel.

This post has been edited by linuxluver: Jul 25 2009, 03:30 PM

Any updates on this? I thought of getting this particular model for my PC + PS3.. but after reading this thread I'm having doubts..