anyone else has this chip.. im running it on a DFI LTx-48 T2R motherboard.. i got it stable @ 3.4ghz .. with the following voltage settings

FSB: 425
Cpu Multiplier: x8
RAM Speed : 1021mhz (5-5-5-12 2T timings) in a 5:6 ratio
CPU Boot Up Speed: Auto


Vcore/CPU Vidd: 1.275 (cpu-z reads at 1.312 dunno why ,so does bios) (default was at 1.23v)
CPU Vidd Special Limit : Enabled (probably this is why the vcore increases)
CPU Vidd Special Limit Add: Auto
NB Voltage: 1.392 (default was at 1.25v)
CPU VTT : 1.25 (default was at 1.1v)
SB / Cpu PLL : 1.51 (default voltage and minimum in the bios)
Clockgen Voltage Control : 3.45v
RAM VIDD (ram voltage) : 2.05v (rated at 2.15v, default at 1.9v)
GTL Buffer Strength : Strong
Host Slew Strength: Weak


GTL Ref Voltage Control : disabled (systems seems too be unstable if i enable this)
CPU GTL 1/2 Ref Volt : 113 (unchangeable since i disable voltage control)
CPU GLT 0/3 Ref Volt : 100 (same here)
North Bridge GTL Ref Volt : 100 (same here)

anyone else has this chip or motherboard .. could use some advice .. am trying to OC to 3.6ghz or more..

o yeah temps on load were 62C max on first core.. 60C on the rest
on idle 35-36C

am using a OCZ Vanquisher cooling for the CPU with cooper heat pipes (planning to get the Thermaltake Duorb )

okay xD thnx kinda new here