Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
17 Pages « < 14 15 16 17 >Bottom

Outline · [ Standard ] · Linear+

 AMD® Socket-AM2&AM2+ Overclocking V13, It has come..Beware of these Deneb..

views
     
cdlim87
post Jan 19 2009, 06:14 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(anep @ Jan 19 2009, 05:50 PM)
what sud i increase 1st? need to find max multi then htt then vcore?
*
not max multi la actually...
erm........... let say u do a 3200MHz, u can use diff setting of OC to get 3.2Ghz, mayb:
oc js increase the multi HTT 200 x16, or higher HTT + lower multi...
so try with diff set of this setting and find out which 1 that required the lowest Vcore.. smile.gif

QUOTE(ah_khoo @ Jan 19 2009, 05:54 PM)
well, one need to consider d 89w rated tdp as well. no doubt d 1MB extra L2 cahce comes in handy in certain application, but it does contribute to higher temp as well. imo 5k b.e fares better than 5600+ f3. performance wise for sure 5600+ has d upper hand but oc is not all about performance, satisfaction (achievin higher clocks) also important (at least for me).  nod.gif
*
ya oso... OC got many diff propose... laugh.gif
depend on personal which 1 thy like to go... nod.gif
cdlim87
post Jan 19 2009, 08:15 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
if me will go for 2 type only...
either the locked chip lowest speed 1 or the BE chip with highest speed 1.. biggrin.gif
and take stepping B3 for sure... thumbup.gif



This post has been edited by cdlim87: Jan 19 2009, 08:16 PM
cdlim87
post Jan 19 2009, 10:25 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(ask8900 @ Jan 19 2009, 09:16 PM)
wah lao e bro .. u buy 1st la ... then i wit folo u  tongue.gif
*
LOL sound like orang kuning DIGI jeeee....

» Click to show Spoiler - click again to hide... «


QUOTE(uzairi @ Jan 19 2009, 09:17 PM)
abg sepul busy playing with his newly downloaded games laugh.gif
*
swt ==''

bang sepul x bz cari kerja ke tu....???

QUOTE(mr_habuk @ Jan 19 2009, 09:42 PM)
guys is anyone knows if the kuma can paired with the old nf590 or not..?? so lazy to surf using this braodband..it's like taking forever to load..
*
QUOTE(digswell @ Jan 19 2009, 09:45 PM)
maybe can ..maybe not..the problem is HT-link
*
yep.. mayb wil hv prob... so beter thk properly, or js get the buah kurma 1st, if cnt thn change MB tongue.gif
cdlim87
post Jan 19 2009, 10:43 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
Attached Image

js trying lowering the Vc, stable..!!

temp with stock IceBlade single fan

3000MHz , 1.34v

idle:38c (max)
loaded:53c (max)

---------------------------------------------------------

actually js nw i facing with prob whn oc higher, cnt get stable, may need to tweak, but im bz and lz, so i js ply with low Vc at 1st,

aft this only try OC more.. biggrin.gif

This post has been edited by cdlim87: Jan 19 2009, 10:50 PM
cdlim87
post Jan 19 2009, 11:38 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
looking for tdp 125W enuf, dun take 140w, ltr headache laugh.gif
cdlim87
post Jan 20 2009, 12:12 AM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(sarahlah @ Jan 19 2009, 11:53 PM)
9950BE now also got 125w.. brows.gif

but how to know its the 125w version ?
*
nod.gif
thats last time bro sepul poison by that lor... 9950 125w laugh.gif
cdlim87
post Jan 20 2009, 12:49 AM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
direct ask only..

ask thm which batch is their stock..
cdlim87
post Jan 20 2009, 02:03 AM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(ask8900 @ Jan 20 2009, 01:54 AM)
my 5600 in 3.2g vc 1.44 is high ? my ram vc 2.0 is high ?
*
quite ok with that 1.42-1.44v smile.gif
vDIMM 2.0v oso aceptable...

mayb u can try harder to make it stable at 1.4v or below brows.gif

curently i get poison on plying low Vcore... biggrin.gif

cdlim87
post Jan 20 2009, 12:41 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(ask8900 @ Jan 20 2009, 03:30 AM)
i bios i set is 1.40 ler dunnot y here 1.42~1.44 ...hard to do it ler ..... after cny my new processor 7750be of 9950be wit come  biggrin.gif  920an940 mahat la ...  i wit change my new ram 4GB kit (2GBx2), Ballistix 240-pin DIMM, DDR2 PC2-6400 memory module coming  drool.gif  btw u all know lao yat what shop have sell the ram ma ? an price ?  hmm.gif i sell my 5600 an my ram liao ... hehe
*
sold ur curently proc+ram ?? LOL
ram how much wana let go??

QUOTE(uzairi @ Jan 20 2009, 03:58 AM)
cdlim, count me in for the gathering. I'll go with abg sepul if he's going.
*
QUOTE(verdict @ Jan 20 2009, 04:08 AM)
Same thing here bro...he he he...

brows.gif  brows.gif  brows.gif  brows.gif
*
ok.. np bro...
@ bang uzairi
drop a msg at BTL, for reserve propose, thx.. thumbup.gif

QUOTE(sepulgilo @ Jan 20 2009, 07:30 AM)
aku takde jengok korang pun korang include aku sekali dalam cita isshkk isshkk layan doeeee kepala ngan game lelama ni anyway wa ada interview today so wish me luck so i can get my p2 ASAP tongue.gif
*
» Click to show Spoiler - click again to hide... «


This post has been edited by cdlim87: Jan 20 2009, 12:43 PM
cdlim87
post Jan 20 2009, 12:46 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
@ bang xo

hey, i run 2Ghz @ 1.136v

its low enuf?? how much ur 38F3 lowest vc for stock speed? hmm.gif

Attached Image
cdlim87
post Jan 20 2009, 01:02 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(wen9x88 @ Jan 20 2009, 11:13 AM)
my stock fan too noisy,plan to get a cooler for my amd 6000+.
i found a hyper z600 RM120 with 2 fan,quite interested.
btw the performance good anot ?
can recommend me a good cooler ?
thank you
*
QUOTE(wen9x88 @ Jan 20 2009, 11:43 AM)
if i take Thermalright 120,the temp decrease a lot ?
*
actually z600 performance oso quite good.. its ok depend on ur own which 1 u like..

the performance not much diff actally.. thy big ass air cooler highend/midrange/lowend, i thk max in 5c diff only...

z600 @ 120Rm is vy good price oledi, can thk bout it, or if u like new,

-DeepCool IceBlade pro around 100Rm(new)
-SunBeamTech CCF performance quite beter, price around 150Rm(new)
-Xigmatek Archilles/s1283/ Red Scorpion... also will not burn ur wallet,
-Thermalright ultra 120 extreme a bit exp for new unit..
-CM V8, not recommended due to no worth for the price/performance ratio (personal opinion)

thats for majo hot tower cooler..

for blow down type:
-TT Big ty VX
-DeepCool KillerWhale.... etc...

thk about it... wink.gif

p/s: may pick which 1 that u prefer too frm the good looking cooler biggrin.gif

Added on January 20, 2009, 1:05 pm
QUOTE(xixo_12 @ Jan 20 2009, 12:54 PM)
1.184v @ 3.1Ghz
0.8v @ 1.0ghz

above is my testing..

assuming 0.9~1.0V is achievable.. i dont think it will use more than 1.0v
urs is 6000+, quite ok la.. thumbup.gif
*
wooots... 1.184v only sweat.gif sweat.gif
need try harder,, i noe cnt beat but as long as try to make it lowest... biggrin.gif

QUOTE(fuzore @ Jan 20 2009, 12:56 PM)
need to decrease more voltage bro...make it 1.12V running 1.8GHz.... whistling.gif
*
i set it 1.12 oledi la... whn stress it bump up... doh.gif

This post has been edited by cdlim87: Jan 20 2009, 01:05 PM
cdlim87
post Jan 20 2009, 11:00 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(sepulgilo @ Jan 20 2009, 03:01 PM)
for our stock 2.0 @ 1.17 enough edi

Added on January 20, 2009, 3:03 pm

if not mistaken 15+rm compare to original retail @ 2++rm
*
1.17v?? mine lower wor... 1.12-1.136v ^^

QUOTE(ask8900 @ Jan 20 2009, 03:27 PM)
me oso kene polson  play low voltages now my amd 5600+ 2.8ghz is 1.20v drool.gif now run orthoe 1st  biggrin.gif
*
haha.... come come.. !!

QUOTE(momuchi @ Jan 20 2009, 04:49 PM)
just sold my x2 4600 F3, now thinki to get x2 6000+ or x4 9600?

google that x4 9600 can`t pass 2.4ghz..

which one would better..
*
no point change 46F3 to 6000...
oso no point to get 9600, beter get any b3 stepping chip, with end code xx50 thumbup.gif

QUOTE(fcuk90 @ Jan 20 2009, 10:15 PM)
all x2 5600+ are F3?
*
nope..
cdlim87
post Jan 20 2009, 11:02 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(ah_khoo @ Jan 20 2009, 04:57 PM)
most b2 chips can't really clock well, why not hunt for 2nd hand 9550 or even tri-core?  smile.gif

btw, here's d tdp calculator for all intel & amd chips... mite be useful for environmentalist like bro xixo...  tongue.gif

CPUcalc

4600+ to 6000+ is downgrade...  laugh.gif
*
y not js using this, easy biggrin.gif

>> http://extreme.outervision.com/tools.jsp
cdlim87
post Jan 20 2009, 11:13 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
dia bz funding moneyflies.gif for kahwin la... whistling.gif
cdlim87
post Jan 20 2009, 11:54 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(AMDAthlon @ Jan 20 2009, 11:15 PM)
Oh kahwin ah  drool.gif
Nvm..go ahead..Phenom II can think later..
bro cdlim no more OC?Or waiting AM3?  whistling.gif  tongue.gif
*
940BE or kahwin... fikir baik2, kahwin 1st kot bro... ^^

QUOTE(sepulgilo @ Jan 20 2009, 11:16 PM)
OTAI mesti la rembat 940 hehehehe meh kita habiskan zaman am2 untuk tahun ni dengan 940  thumbup.gif  thumbup.gif
*
the last superb chip for am2+ nod.gif

QUOTE(CV6149 @ Jan 20 2009, 11:27 PM)
hahha correct!
except who do all that while gaming? tongue.gif  biggrin.gif

sepul,
ur am2 become ur torrent server lerrr
*
he wana frame his 38F3 d, he use 4400 for his HTPC

This post has been edited by cdlim87: Jan 21 2009, 12:05 AM
cdlim87
post Jan 21 2009, 12:06 AM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(AMDAthlon @ Jan 20 2009, 11:11 PM)
Hmmm..i quite slow..being abandoned here sleep.gif
If i cannot make new thread within this few days..Perhaps another cut of..So be await..
Im just waiting for an AM3 and Propus drool.gif whistling.gif
Bro xixo..when changing to Phenom II leh?  vmad.gif  mad.gif
*
no time to learn and ply... swt... bz now..

even on hand with m3a79t deluxe doh.gif
cdlim87
post Jan 21 2009, 12:29 AM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(xixo_12 @ Jan 21 2009, 12:10 AM)
how ya intern? got edi?
*
hvn get bro... js apply 2 company so far.. laugh.gif

QUOTE(uzairi @ Jan 21 2009, 12:21 AM)
Join Folding bro, that way u can utilize the overclocked speed and the extra core idling all the time  brows.gif
I tot open new thread when its 2500 page  hmm.gif
*
QUOTE(xixo_12 @ Jan 21 2009, 12:23 AM)
lol bro uzairi always come with folding word..
i have gc for that purpose

not 2500 pages, 2500 post sweat.gif
*
doh.gif

BTW bro uzairi, can drop a msg in oc gathering thread thx.. biggrin.gif

» Click to show Spoiler - click again to hide... «
cdlim87
post Jan 21 2009, 01:55 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(fuzore @ Jan 21 2009, 11:48 AM)
this is my tdp count ......

[attachmentid=773115]
*
^^... i always use on9 that 1...

QUOTE(byfc2010 @ Jan 21 2009, 11:49 AM)
aiya...
i quit noisy setup d...
now change to silent leh...
*
silent is for HTPC only.. tongue.gif

QUOTE(krekrekoke @ Jan 21 2009, 12:05 PM)
silent setup?

watercooling then.  haha
more headroom in oc also
*
yaya

QUOTE(byfc2010 @ Jan 21 2009, 12:29 PM)
hmm ok...
wil consider it...

Added on January 21, 2009, 12:43 pmguys, i know i'm being annoying here...
i can't be able to run 3dmark03 and 3dmark05...
whn u execute them, there goes the flash screen, thn it's stuck there forever...
wads the problem?
*
QUOTE(byfc2010 @ Jan 21 2009, 01:25 PM)
my vista(lappie) can run but my XP(desktop) cannot run... lolz...
btw i nvr instal any patch for it to run in Vista...
*
OC no stable hmm.gif
cdlim87
post Jan 21 2009, 04:31 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
QUOTE(byfc2010 @ Jan 21 2009, 02:10 PM)
not that problem la...
fixed it v futuremark hotfix...
mine orthos passed 10hrs alr...
*
ic.. good thn..

QUOTE(yen262 @ Jan 21 2009, 03:08 PM)
Hi,I am new.I tried to overclocked my AMD Athlon X2 5600+
with 225,X14,and core voltage 1.375V.

Is it stable?and can it go further?
*
add ur signature with ur rig spec for easy reference.. thx..
and needed ans oledi ans by other..

QUOTE(ah_khoo @ Jan 21 2009, 03:27 PM)
woot rupe2 nyer bro fuzore same age as me, i'm not so old some how...  tongue.gif

bro, ur fans gaban ke?  laugh.gif 
it depends on how u define stability. some are contented w/ spi, some use f@h, while some orthos freaks like me must have d system to be prime stable then only can be considered stable. u can use these tools to test for stability, they're provided @ d 1st page.  wink.gif
*
ask u come gathering lor... dry.gif

QUOTE(yen262 @ Jan 21 2009, 04:23 PM)
Thanks a lot.
And for this case,i do not need to change the voltage for chipset n hypertransport,right?
*
every time please do make ur signature to rig spec,
for stablility, do the test with either 1 software suggested, if hv any prob
please post here with screen shot, the several pages of CPUZ ss... icon_rolleyes.gif
cdlim87
post Jan 21 2009, 06:10 PM

AMD
*******
Senior Member
2,220 posts

Joined: Sep 2008
From: PJ
-delete-

This post has been edited by cdlim87: Jan 21 2009, 06:13 PM
« Next Oldest · Overclockers United · Next Newest »
 

17 Pages « < 14 15 16 17 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0459sec    0.52    7 queries    GZIP Disabled
Time is now: 5th December 2025 - 12:47 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.