find this 2 guys and PM them
rockrock from robyncom
CEX guy from CEX

optical disc drive

use CPU-Z (www.cpuid.com) to check the real time memspeed
because of memory compatibility issue (multiple brand /batch /chipmaker) no one can 100% assure automatic setting over DDR800.
533MHz is real time speed a.k.a. DDR1066 if you use Double Data Rate theorical speed
so you're running DDR1066

This post has been edited by ktek: Jun 12 2009, 08:00 PM

some card got built in sensor
just need program like rivatuner, speedfan to read it.

lorry transport like tanjung express, count by each bundle (no matter big small) below 10RM


sorry i don't have any recommendation but as a reminder, avoid those with GeForce 84 /86.
problem problem problem

who do you buy from?
might be the rejected or refurbished stock, so...

no, enable AHCI don't bring "more" performance.
that's just the "standard" speed but disable it will reduce performance

zero
c0 c1 d0

the richer one can support more hdd, more usb (see specs)
otherwise i don't see it has more performance or not capable for your needs

something like my favourite stuffs or gadgets
no secret language la

in new 3D games, P4 is not fast enough to feed information to 4850.
processor tell mobo to bring HDD in, keep things inside RAM, then he process the codes behind game (load), pass graphic job to 4850, pass sound job to soundcard.. etc

so less info at a time =low FPS &framerate =delay &lag =user furious
although CM500 continuous power is lower than SS500, it's still a reliable PSU for that price

another reason would be the fan sleeve or bearing are wear off, since it run high speed for a long time (consider normal wear & tear)
you can apply light lubricant on it (spray WD40 or use motorbike 2T oil)

alternative to vacuum, use blower

no problem,
DDR2 in Galaxy card communicate with 95GT chip
DDR3 in Asus mobo communicate with P43 chip
they don't fight together

This post has been edited by ktek: Sep 14 2009, 02:18 AM

display card can always adjust to any resolution, no matter HD or not.
so, computer side =OK, just need TV that support PC input (VGA, DVI or HDMI) & your media (game /movie).

pls run a proper benchmark
a quick run of superpi 2M 4M 8M (about 5 minute) will show you which is faster.

danny: yes, i believe superpi more than vista point.
it can show miliseconds so one of them must be SLIGHTLY faster
OCZ Gold nice lar

xiang: it will run fine. but got possible you will lose Dual Channel advantage, which i'm not sure what model is your mobo
it's not significant on normal usage /game after all.

2x2GB give better advantage by:
-less confusing memory setting (when you doing serious overclocking)
-got 2x free slot to upgrade 6GB 8GB
-save a little electric

This post has been edited by ktek: Sep 17 2009, 12:44 AM

what magic tape? ask the shop people what's the purpose


front USB is extension only
use ruler to check space of inside area & back I/O
then you got no problem.

your old question is not clear enough
AM3 mobo run only DDR3, can accept AM3 processor only.
AM2(+) mobo run only DDR2, can accept both AM2 & AM3 processor.

both are Core Architecture, performance should be similar if overclocked to same speed (E84 still have more cache advantage)
but nobody can gurantee the sucessful of your overclocking