1. Looking to do some custom hood or even bodykit also, but dunno where can find one. Can someone here guide me where is the place??? Better with reasonable price loh..
--Custom stuff is a fiber......unless u thinking of changing in the future. Try to surf the sell corner.....there is ppl providing this kind of service

2. Is there any shops sell other than passo bodykit?? place around KL/PJ
--Ori passo kit is not cheap. Front half will cost u more than 3K and just to inform u, it is illegal. So better pray hard when u meet JPJ block

3. For rims, i would like to use 2piece 17size but some ppl told better get 15size with high profile tyre..well,kinda pening which one is better..so here ur guys must have other opinion rite, why dont tell me which one is better suited for Myvi..
--Just go with ur budget......small rim cheap tyre

4. I always hear ppl says gab spring for custom adjustable, is that really ok?? how about price complete front and rear?? any estimate guys??
--u are asking about GAB or what? or u wan custom adjustable......like titan??? if titan pls prepare 2.6K
if ur budget around 2K u only can get GAB SL, GAB HA and HWL or other cap ayam brand.

5. For examples here, i used se rear bumper and want to custom it, can i really do that??? where???
--custom ur ori bumper?? well no worth it.

6.Did ur all heard D-pro?? What is that?? it is a place for tuning??
--Is in Kuchai Lama but very expensive.......prepare to put ur head in the chop board........hahha

There is a lot place providing turbocharge package......not only D-pro.....anyway.....D-pro package i would recommend u think twice......hahhaa

Change bigger rim with tyre width at least 195. Of coz get better tyre

Get an adjustable or hard spring and short stroke absorber

Anti roll bar - rear at least 16mm if can 19mm
- if u 1.0L pls get 1.3L stock arb 25mm thick or u wan better 1 27mm

Fender Bar - u will feel more stable

Strut bar - steering turning more sharper

Then u can layan corner very well already

Each corner got it limit. Just don't go over it......lollll

Want to learn more on corner.......come join me in HPC in sepang......got personal instructor give u advice.........lollll

This post has been edited by tkytky: Jan 23 2009, 03:00 PM

Er bro.....myvi is 1 belt design le which connect to Crank, tensioner, alternator,water pump, compressor and steering pump.......got 3 meh.......

No need to take out bumper le.......to replace belt le

---

Added on February 10, 2009, 3:49 pmSticky tyre won't give u much better FC 1 le.......control ur right leg la.....

This post has been edited by tkytky: Feb 10 2009, 03:49 PM

Wah....u like to mod from stock design to another stock design ar.......hahaha......just kidding man......

Since PP2 serve u so well just stick to it lo.......no need headache thinking what to use. How much Ban hooi qoute u for the 2 tyre?

This post has been edited by tkytky: Feb 11 2009, 10:48 AM

Ya......their price quite cheap. I might choose PP2 as my current Hankook V8rs tyre is almost time. 195/50/15 is around rm200-220 le.....if i not mistaken. Mine 16" touch rm300 each .

Insultation only come when those car is over decorated. If u keep it simple then is nice.

Btw, i got new toys........u interested pm me le.....

hahha.....how's ur car now?

ohhh......drive safely......glad u like the product. Rezal problem already settle. Nothing big happen........lollll.....then time also for brake upgrade lo.........soon i will have something for ur brake too.....loll

This post has been edited by tkytky: Mar 2 2009, 01:55 PM

Because stock myvi spring@ absorber is very soft.

---

Added on March 3, 2009, 12:53 pmSo when u are getting 1.......if u need any help pm me

This post has been edited by tkytky: Mar 3 2009, 12:53 PM

Yup.....both is soft

U wan comfort then stay stock spring but change to slight harder than stock absorber.......like Improve Comfort and Gab SA or GAB Comfort. This reduce some bumpyness.

This post has been edited by tkytky: Mar 3 2009, 07:32 PM

PM me.....i give u good 1

Range around rm500-700 full set

---

Added on March 4, 2009, 11:43 amI was half dead that day.........lolllllllll.......glad that u guys happy with the result

Just to share.......ori myvi driver side engine mounting will cost around rm200 per piece.....damn it.......mine already koyak

This post has been edited by tkytky: Mar 4 2009, 11:47 AM

What u mean? u mean the engine mounting? go perodua check lo.....


yup......saturday 10am same place.

Go autocraft la...................

It will give u good improvement on pickup and no drop in top speed. Gear will down shift from 4th gear to 3rd gear when u almost 3/4 throttle position compare to stock which need full throttle. Anything else pm me.......thanks....

This post has been edited by tkytky: Mar 10 2009, 06:30 PM

K&N filter only slightly.......iridium spark plug is hopeless.......Exhaust if u get the correct setup then yes.....improve.....but those lighten pulleys definitely will improve. Plug and play.....no headache.

Spark is equal to fire.....in order to made a big bang or big explosion, u need big fire, big compress air and big fuel........ur car is stock with fuel and air are small amount......do u think by putting a big fire will give u a big bang????? ....lol

This post has been edited by tkytky: Mar 11 2009, 02:00 AM

Not lecture la......just give example.....lol

Antiroll bar will give u a lot of effect. Fender bar will give ur car more stable feel. Stock spring + shock will got effect 1 if those bar installed.

---

Added on March 19, 2009, 11:34 pmWah.....so many project ar.......haha

This post has been edited by tkytky: Mar 19 2009, 11:34 PM