ya lo
recently no ppl wanna buy my kaya bun

bought yesterday,...

RM270 from Viewnet..

oh man,that sound sooooooo dirty coming from ace mei mei...hmmmm or izzit just me having some dirty thought....

Nopes, fully rated to 208kWs, which adds up to 280 horsies.

Only the RB20DE based GTS was rated to 150 horsies IIRC

Will be trying to try my hand at Greasemonkeying the Intake, but the exhaust will require a workshop install it.

My 1st custom wc kit bought from Sidewinder.

Swiftech MCRES Micro v2
Swiftech Apogee-GTZ-Ci7
Tygon R3603 1/4in. ID 3/8in. OD Tubing
Tygon R3603 1/2in. ID 5/8in. OD Tubing
Danger Den 1/4in. ID Barb
Swiftech High Flow Fittings 1/4in BSPP thread to 1/2in ID Barb
Breeze Miniature Hose Clamp
Swiftech MCB-120 v2 Radbox
Swiftech MCP655 12v DC Pump - with Speed Controller
Swiftech MCR220-QP Quiet MCR220

Total damage: RM1263.09 including shipping. Cheap.

After spending few hours talking with my youngest uncle the Kastam.

where got,u think too dirty liao

i know i know,just i see ur car without rear spoiler so deduct 100 horsepower from there

meimei, that skyline is GTT la... not GTR...
RB25DET can beat down most of the car liao lo... but RB26DETT plus twin HKS Turbo..... OMG 600-800HP possible..

This post has been edited by subrok007: Mar 28 2009, 10:32 AM

Just bought My first lcd..


Plus Free 2gb Transcend Handy Drive

In Action!


RM470 from digitalwise



This post has been edited by Boyzgamers: Mar 28 2009, 07:38 AM

i thought you ordered Dell?

change my mind bro..

also out of budget..

cheap onli
165 i think

now bump out the reso.

I wan results....

I'm still waiting for my 2 items then kao dim.... I drool over newly bought items....

i know,that's why i said it's RB25DET with single turbo and FR

Card? how if compare to GTX295?

faster than GTX295 SLI or even Tri-SLI lo...
edit already la the word..

GTT vs GTX

eh..
something about ure tubing aint right dude..
mixing 1/2inch and 1/4th???


i suppose ure going to use the coolit freezone in the loop

since this is the best config.

tec[1/4]??? - pump (1/2) to cpu to res (1/2) to rad (1/2) to tec (1/4) and this is the part.. how u going from 1/4th to 1/2th on the mcp655??

unless ure going to do

pump [1/2] - rad [1/2] - TEC[1/4] to CPU[1/4] - RES [ 1/2] to Pump[1/2]
this dude is not a good idea mixing 1/2th and 1/4th barb on the cpu block.
and also having the pump before the rad.

dunno just find the whole thing weird.

unless u got the mcp655 mod kit..

This post has been edited by cstkl1: Mar 28 2009, 11:09 AM

Still in progress of setting up
Now using freezone stock pump, 1/4 only. Not using rad currently for some reason, damaged like hell due to mishandling. Gonna get new rad soon. Mind to let go ur rad?
Current setup is TEC-CPU-PUMP-RES-TEC. Good temp idle 43C, stressed 74C when the freezone block is put out of casing. I think will get better if got rad.
When installed inside casing, haiz...
Discuss here bro: http://forum.lowyat.net/index.php?showtopic=41021

This post has been edited by owikh84: Mar 28 2009, 02:39 PM

eh swiftech packaging is very good.
and is packaged vertically.

i am pretty happy with mine..

linx at 5gb 11 rounds in the middle of the afternoon max temp is only 81C at 4.2ghz HT OFF. that 40 mins btw.. inside the casing but with the raven top removed.

a lot of ppl here dont even do linx more than 800mb..
try 5gb folks..

theres a reason y i got that rad..
first was having single pass/dual pass for this setup no difference as its low flow
second i wanted the res to be at the highest point.. aka no bubble.. so thats y bought the mcr220qp res.
the pump makes no sound now..

ure whole setup .. is questionable..
for the freezone i would have done the exact same thing but the barbs would have bought koolance 1/4th compression or straight.
make sure for the gtz u use the orings that comes with it... if not leakage.

no point using the mcp655.
and very trouble some because of one hardware u cannot run 1/4th tubes for the whole thing..
i would have bought the mcp655 mod kit with it or cheaper yet get the xspc pump and redo the molex cable to 3 pin so can be controlled by fan controller.