im using c2d 6600 1066fsb

my ram is ddr2 667

my motherboard is Asus P5KPL-AM - G31 Chipset,


so...my processor = 1066fsb..mean my ram is only run at 533mhz rite?

but in my system my ram still runing at 667,

when i overclock to 1333fsb...my ram become 400mhz already

i set in bios for the ram, 667mhz, but when i overclock..then ram still follow up,

you see when we oc our proc by upping the Bus Speed,the ram speed will increase according your bus speed.

this is y ur ram speed keep going up.

be sure you understand what and how to oc 1st,if not you might burn down your hardware and i bet you dun wan that to happen.

no..the problem is my ram is 667

and c2d6600 is running at 1066 = 533ram

so when i oc to 1333 = my ram should be 667 also

but now when i oc to 1333..my ram become 800 liao..

check the fsb:ram. for ur ram to be 667, it should be 1:1

ya,check your ram multiplier.

i think u misunderstood some thing about ram here.
you can refer this thread here:-
basic ddr2 ram oc written by kmarc
http://forum.lowyat.net/topic/626450



This post has been edited by lloyd1030: Nov 24 2008, 02:47 PM

my runing at 4:5


how to set to 1:1 ?

sumthing 2 do wif system memory multiplier.. go google n check

This post has been edited by dylanchan1688: Nov 26 2008, 03:58 AM

only have x6~x10

hmm maybe that is the limitation of ur mobo..

i think this one is multiplyer for cpu... not for memory... it's like MCH / NB multiplyer... change to x2... then you will get 1:1 ratio...

or maybe you can post some pic of your BIOS....

This post has been edited by yemz88: Nov 27 2008, 03:57 AM