hv some question, here my rig

Intel E5200
Corsair Dominator 8500-C5DF
MSI 9600GT OC
ASUS P5Q-SE

i can run my processor on around 3.5 to 3.6Ghz (320*11 and 320*11.5) but i cant pass the memtest86 if i overclock my ram to or over 1100Mhz.....

memory setting
latency 5-5-15
voltage 2.1v (some time increase to 2.3v oso same zzz)

whats wrong with it...any1 help?

but tat dominator EPP setting is 5-5-15 with 2.1v running at 1066...if i run at 1066 then everything fine but i duno why cant go beyond 1066

cuz of my processor FSB is 800Mhz so the board auto detect and set the ram frequency at 800Mhz (5-5-5-18) too. I tried b4 running at 800Mhz (5-5-5-18) and 1066Mhz (5-5-5-15). Both of these setting running fine.

But once i change it become 1100Mhz or above then error occour

This is the everest ultimate memory benchmark test but fail to run prime95 and memtest86



This is the current stable system


PS
ASUS board in warrenty so borrow P35 chipset board from fren for temporary use

This post has been edited by calvin1702: Jan 10 2010, 01:43 AM