I've almost succesfully upgraded my 20gb to a WD 120gb.

This is what i've done following various guides
-I've backed up the 20gb to an image bin image, bin image of only partition2 and also exported files from part3 (excluding cache and compatibility)
-I've done the firmware tweak on the 120gb.
-Hex tweak to re create the Partition 0 and 2. Now all partitions show up in Xplorer360 Beta 6 Extreme2
- restored partition2 from the image.
- Formatted Partition 3 on the 360, it showed as 107gb free:)
-Injected the files extracted from the disk (also tried the ones extracted from the Full .bin image) to partition 3. I've also started again and first did the index file, then the other folders (someone said that helps)

Now my problem is the data on partition 3 doesn't seem to be readable. It must be there as the free space has gone down a few gb (on the 360), but it doesn't see any files there. I can copy an item from my memory unit to it, so its working storage.
Also in Xplorer360 the injected folders dont appear, i believe the single index file i injected on its own appears and it sees a cache folder.

What have i done wrong / missed. I've now tried several times, serveral formats with several injecting files.

Thanks in advance