Nope... i dun think so..

can xplorer360 detect the hdd if we use with sata to usb connection.
since the xplorer360 itself came with xport where it connect to a computer using usb rite?

bro one thing about the tutorial here

Tutorial – Editing the Partitions In Windows

Meaning I have to plug in my desktop HDD and let it load windows, and the from windows, edit this partition?

i connected my hard disk to the sata connector and hddhackr couldnt detect my hard disk on the sata port

i had to hex edit the hddhackr program and insert my own sata port devices

i doubt your method of using usb will work coz its specifically looking for sata I/O ports on your motherboard (hddhackr)

you need to flash your hdd in dos base.. I'm not sure abt the sata to usb connection.

Yes you need to load up ur windows xp, and then run any hex editor. You able to flash it?

He meant tht he wanna do the xplorer transfer which require windows

This post has been edited by DarkSaviour: Nov 21 2008, 02:42 PM

haven't started yet, still in the office, will be at home by 4pm, then will be asking for help hehehe...
btw, i checked my MOBO, only 4 sata port...

If successfully, just give me to chainsaw you in Gear 2.. hahahah Good Luck

This post has been edited by DarkSaviour: Nov 21 2008, 02:45 PM

bro have tried, when i tried the first time this one come up

1) “fatal error, the ec sector count was not found in the FW” – you need to change your HDD. Might due to you have formatted the HDD in windows

but i didn't format or do anything.....i just ran from a windows 98se bootdisk


This post has been edited by wintzen: Nov 21 2008, 05:32 PM

What model of HDD you're using?

and do u edit the hex ?

This post has been edited by DarkSaviour: Nov 21 2008, 05:41 PM

wd 160bevs

yeah i managed to figure the hex, that's when that message pop up when i run hddhackr -f

I having the same problems with b4.. but after go back to change the HDD to 3200BEVT BLUE voila.....
Guess u out of luck like me.. maybe u could change the HDD maybe to 2500BEVT or BEVS

hmm...i was wondering coz i didn't do anything when it comes to formating. could it be because i use windows 98se bootup disk?

anyway possible for 1-to-1 exchange ar?

nothing to do with boot disk, I think the HDD itself, maybe u shd upgrade to 250GB? or BEVT model

hmm......ok i am wondering if they allowed me to do it...hey what did you tell them when you want to change it?

Sorry for the late reply. Just came back from class. Dark Saviour I want to thank you from helping me compiling the guide and answer the question in forums. Credits will be given to you. Thx

I'll post up the picture today. But not many. I'll hope it wil do for now. Sunday I will upload whatever picture is still missing.


Thx for helping it. If you don't mind I'll take the picture from the compile guide and put in? Anything you want to add on?


You mean using X-sata?

Can you quick summaries what you have done so far? Just want to know where you went wrong.

eh darksaviour already put some pictures in the guide.

Yup he did.

Just updated mine, can't put too many picture.

I'll figure out away.

MMx zero . is it possible to transfer the Xbox Live Arcade games if i buy the 120 gb from my 20 gb . ?

Yes. Only those you bought with your gametag.

ok sorry was away
just came back to change my hdd
ok basically what i did.....
i setup floppy with windows 98se bootable
when i tried the first time, it can't detect the drive
so when i tried open msinfo32
i notice that my scsi got no info, info only available in ide
so i change the hex value accordingly and when i connect the drive again when i tried to enter hddhackr -f it can detect the drive
then it prompt for flashing i click 'y'
then prompt for create undo bin i click 'y'
right after that, the error message comes up