hek hek now can kecoh kecoh here hahaha sorry again ts for the accident

if i can get anything rite by tonite i will update mine bro

thanks to digswell for the help

-deleted-





This post has been edited by sepulgilo: Nov 13 2008, 12:16 AM

didnt u see the nb cooler senget look like .....aaaa hahhhhahahahah

dunno la got it from a forumer also cheap cheap ayamas got to mod skit for side panel and mobo tray

This post has been edited by sepulgilo: Nov 12 2008, 12:29 PM

as told by dig that mine actually can push to 3.4 but afraid what aaaa hahah cant remember la

i can do 3.4 3.5 3.6 but cant stress it out

can play benchmark not stressing (if i know sure i wont sale my hx620 last month )

This post has been edited by sepulgilo: Nov 12 2008, 01:32 PM

still need to learn more la bro pros anc more cons hehehee
anyway i rhinkin of sacrificing my m2ne mosfet heat pipe hehehheee seems fit to this board hahahaha

now my mosfet only use ramsink

i think so hahaha this one hunger of voltage keep asking for more

i did manage to do 3260 this afternoon but stable @ 1.36 <--occt stable 1 hour orthos damn failed

while stress felt asleep i woke up see thought its failed whwn stressing stop i shut off and go back to sleep

after awake i open folder to see the result it actually stable hahahhahaahaaa

This post has been edited by sepulgilo: Nov 13 2008, 12:07 AM

-updated my clock-









have anyone stress using LINX how it goes more stressing than orthos or prime?

updated again now @ 3300mhz paste on page 9 tq

This post has been edited by sepulgilo: Nov 14 2008, 12:13 PM

owh hahaha i didnt notice that at all hehee later i chk the setting again

i did move my card from master to slave to master maybe it has activate the xfire mode

will reinstall driver and should be ok ehehheeehee

thanks for reminding me


peh still show 8x heehhe after read the manual again seems i have to slot in the paddle card so it will run 16x hehehe later la do that

This post has been edited by sepulgilo: Nov 13 2008, 10:08 AM

ok now pci-e fix edi 16x it need the paddle card to run at 16x what a hassle la heheee

hehehee mine need 1.4++ to stable that

even u using the same board have you tried it @1.35vc

This post has been edited by sepulgilo: Nov 13 2008, 11:34 AM

hehehe mine 3.26 need 1.38v vnb up 1 notch & vht up 1 notch to stable damn how did u manage get that vcore 1.35 so so jeles la weh hehehe

as far as i know to get 3.3 stable is 1.45vc n 3.6 @1.6vc<---done this can boot load but not stable tested on my m2n-e (this was done on air)

correct me if im wrong

This post has been edited by sepulgilo: Nov 13 2008, 12:36 PM

yalo with 1.35 how to exceed 50c hahhahhahaa

no need too much bro 1.39 also ok edi hehehe

not me la bro its mruzian 3.3 @ 1.34 he got a gems there

mine 3.4 @ 1.38 can boot can load but cant stress even for 0.10second it crash heheee

3260 @ 1.38 stable with increasing 1 notch of vht & vnb if not it wont stable too

dont bother to update ur cpu-z bro asus board is like that 1 hehheehehee just know what ur set in bios

m2n-e sensor gila one

ive used m2n-e bro u update or not still in cant read correctly
i set 1.4 it still read 1.2+ bla bla hehehehehhehehee

hehhee beleive what u enter dont rely too much on what it shows asus sensor got something wrong or just want use its own software:P

waa stress never reach 60 on 1.44 thats very good bro what cooler ur using

me 1.38vc stress can reach 51-52 cpu core 52-53 each u know ehehhehe

This post has been edited by sepulgilo: Nov 13 2008, 09:30 PM

bro ts u got mine wrong there its 3260mhz not 3250mhz



This post has been edited by sepulgilo: Nov 13 2008, 09:26 PM