mruzian..yours one i already updated what
Check back in 1st page

Database Updated! 

Thanks bro AMD 
New TS is very efficient 

Hey all,  how is everyone? doing well?  

just thought i would post my AMD 4000+ results and see if anyone has any ideas on how i could either push the CPU further or maybe some sweet ram timing ive not yet found.
[attachmentid=668079]
will upload advanced screen dump of voltages and speeds etc if needed.
thanks guys!!

have done this, my amd 4000+ can max out at 327Mhz fsb, but its getting the correct multi and also keeping the ram within reason. my rig really doesnt like the half multi's 9.5 10.5 etc, also not sure if higher multi's are just not available on my board or maybe becuase its not an unlocked black edition, so im left with fsb clock and ram.
i have also lowered my htt divider to x5 to keep things steady.

Thanks.. how about the RAM, since I do not overclock the RAM it should be left at 1.8V ?
1st timer here

10 seems to be my highest whole number multi that i can select but i seem to be very unstable anywhere above 300x10, even though i have booted into O/S at 3.25ghz but not sure if ram timings, CPU/chipset voltages or htlink multi are holding me back? at the moment i am at 1500mhz htlink - but this is very stable unlike my old board which anything over 1000mhz would just bsod.
have tried using 1.47v vcore but doesnt like it much, do u think that it could be a missed timing on the rams side of things or just needs another bump in vcore to get it to where it needs to be?

  thanks for your help mate, 

@mruzian
bro.. ur 3.3ghz@1.35vcore stable or not ?

oh.. u using ccf.. hoho

whats ur idle n laod temp ?

Old? Its just one version back from the latest one, I have updated CPU-Z a lot of time, and still it display the wrong voltage. And already I download the latest one, still wrong voltage

waa stress never reach 60 on 1.44 thats very good bro what cooler ur using

me 1.8vc stress can reach 51-52 cpu core 52-53 each u know ehehhehe

@mruzian
bro.. ur 38f3 is what batch ?
can share some bios setting here ? 

bro.. wat ur core temp whn full load @3400Mhz, 1.44v cool by CCF? 
edit: i'm vy interesting with ur matching elite335 with CCF(interesting about its fitting,as CCF quite height 155mm), can share me with some photo?? TQ

HR09+HR01=HR10..!!! 
no find someting HR for ur PWM ar?? kekekeke

Keep up the good work bro...

Using the ram same as me?

OT:

currently what GC best for bang??

i looking for 4670 with around 310++

but someone does tell me go for 9600gt around 350++

i mainly find for a gc that low power consume and best for bang

wahhh chipset   

but its ok fro bro ah khoo sure he can do magic

go go ah khoo