hi guys, wanna ask if this means i dont have enough voltage or not. coz the past 2 days my pc hanged with no display and also during gaming once the display went away.

i thought can see by the voltage values in everest? is that what its for?

nono, im not asking about the vcore, everything is default. graphics also onboard only.

i was asking about the whether or not there is enough power from the 12v and 5v rails coz the number is over edi.

This post has been edited by awh85: Dec 4 2008, 10:54 PM

psu is in my sig. previously i never had such problem but my system still unstable so i was just guessing that it could be power supply. anyway, here are the hwmonitor screens.

p/s: im not asking about how to oc and stuff, i can manage that. just now time now.

well, i got my 128M version recently for 395. just about the same price as the ECS version but much cheaper than the other brands out there.

ya, i saw u post that, thats why i ask robo, but they out of stock, that time i went lowyat check all no stock except for viewnet i think that had last piece but its the 64mb side port version at 385 which is not so worth it so i didnt get it. got mine from jy14, price went up due to the exchange rate i think.

what happened to my brisbane x2 3600 oc result? taken out edi? why?

hi guys, it seems that i have hit a wall at around 250 ht. my specs are in my signature. i know its not the limitation of the cpu coz i could do 300ht = 2850 with my old ta690g.

just wanna know what other settings im missing out. i have:

- disabled CNQ
- graphics to UMA only, disabled sideport.
- upped voltage to 1.376 which is more enough coz my old ta690g needed around 1.36 to reach 300ht only.
- upped voltage of both nb, ht link and dram +0.1 even though non of them are overclocked. (memory is still below 667, ht link is around 1000, only the nb is up to 1.3)
- also left the ram timings default but changed the CR to 2T for stability.

if u are using this board, can u tell me the best bios version for this mobo? coz if its not the mobo, it could be bcoz i am using integrated graphics (for the time being). but oddly, i could do 300ht with my ta690g with onboard graphics as well.

btw, under my "CPU FID/VID control" i do not have the option set "Custom P-States" to Enabled in the bios version. Would prefer to to flash bios though considering the risks.

hope someone can help coz im really scratching my head coz i cant pinpoint the problem.

p/s: i havent done stress testing yet coz i doubt i could find the solution anyway even if i could pinpoint the problem thru small/large FFT tests.

before this i have used 2 sticks of the current ram i am using and also got the same result, but slightly different tweaking with a pair of crucial d9gmh.

now im using 3 sticks of kvr fp-y5 rev. c. but by theory, there should be nothing wrong with the ram right since its under the actual clock speed. the thing is i cant find the unganged option and i also thought the gang/unganged is an option for am2+ CPUs only?

from what i know, UMA is the system memory (the ram) while sideport is the independent chipset ram for the HD3300. i disabled it bcoz the guy at rebel havens disabled it too. but i doubt that is the problem.

ok, maybe i will try it later. (not today though).

but generally, sideport + uma gives the best performance followed by UMA and then only sideport since its only 128mb. but if it does solve my problem i dont mind changing. in the mean time, if anyone can help me pinpoint my problem then i really



Not sure

This post has been edited by awh85: Dec 20 2008, 10:03 PM

ya i know, it increases onboard graphic.

that means unlocked multiplier?