AMD® Socket-AM2&AM2+ Overclocking V12, The Deneb Era...Is coming..Beware..
|
|
 Nov 15 2008, 03:11 AM
Return to original view | Post
#41
|
 
Senior Member
2,220 posts Joined: Sep 2008 From: PJ  
|
QUOTE(spadecrew @ Nov 15 2008, 03:10 AM) if i use 235x11 at 800 devider that means 235x2=470...n my ram speed is 940mhz?? as above i ans, DRAMx2 = real ram speed..   care..!! u using value ram bater dun OC it soo much.. ltr u BBQ ur RAM...   This post has been edited by cdlim87: Nov 15 2008, 03:13 AM |
|
|
|
|
|
Nov 15 2008, 03:22 AM
Return to original view | Post
#42
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(spadecrew @ Nov 15 2008, 03:15 AM) o000..ok...i'll try use other divider...but if i put heatsink on it will it be ok?? dun try on it bro... if ur ram is ddr2 800 try stick to it stock speed.. value ram no suitable to OC much... else u nid go for other RAM... or get a ddr2 1066, so u will get beter performance on ur rig... ---------------------------------------------------------------------------------------------------------------- hey guys take a look here: Phenom OC GUIDE u will c how phenom x3,x4 diff with athlonx2...  p/s: this link is frm front page.. This post has been edited by cdlim87: Nov 15 2008, 03:25 AM |
|
|
Nov 15 2008, 03:26 AM
Return to original view | Post
#43
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(-pWs- @ Nov 15 2008, 03:24 AM) Ermm....better go for nice chipset build for the ram. yup... -pWs- that is the best way la... but if for buget... thn go for value 1066 ram lor...  |
|
|
Nov 15 2008, 03:35 AM
Return to original view | Post
#44
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(AMDAthlon @ Nov 15 2008, 03:28 AM) ah pening edy with 2 Phenom Avatar lol... sry bro TS,, One FX,One X3  I thought both same user just now. Anyway,CNQ for Vista doesnt require any driver.Last time my Biostar mobo works,dono why my Abit AX78 didnt work.   make u confuse d... i will change my avatar soon as i now din use phenom x3 d...  yaya... is my mistake.. xp should be dunid driver oso,, js nid to enable in bios n control panel, i got install someting CnQ is for asus board 1.. is someting like this: » Click to show Spoiler - click again to hide... « **for observe the cpu clock n voltage only and i tod it is nid install driver... sry guys.. This post has been edited by cdlim87: Nov 15 2008, 03:51 AM |
|
|
Nov 15 2008, 03:40 AM
Return to original view | Post
#45
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(-pWs- @ Nov 15 2008, 03:34 AM) Go for good one. Then dun need headache. yup.. agreed.. My ram I used for more than 1 year already. Worth it.  -pWs- go for 10th oso not bad..  |
|
|
Nov 15 2008, 02:18 PM
Return to original view | Post
#46
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
@TS bro
lol... XP nid driver? errrrrrrrr..  i really 4gt la... but wat i noe is i got install someting la,, dunoe is that CNQ software thingy and driver or js that CNQ software oni.. 4gt d --------------------------------------------------------------------------------------------------------------- @sepulgilo waaa...  same timing with my value ram... but the SPI result gona beat me down d... 27.518 - 27.235 = 0.283s vy small gap oni...  |
|
|
|
|
|
Nov 15 2008, 02:31 PM
Return to original view | Post
#47
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE Najmods Posted Today, 02:14 PM Done some testing today, actually this board booted perfectly at 400HT, I tried to run at 2000HTT but it won't boot tongue.gif, at most it run 1200HTT. No screenshot though, I just wanted to test, but at least it passes SuperPI 1M (400x7) so how much ur SPI 1M score..?? 400x7 macam OC intel d... QUOTE sepulgilo Posted Today, 02:19 PM how la can i catch u bro xixo heheeheh damn 25sec i want to go for 26 also damn hard with tight timing [attachmentid=673043] 26.582sec yala... y laa u broke ur 10th... if not u still can catch up... QUOTE(MENCHELSEA Posted Today @ 02:28 PM) tRY hard abit la bro...  Wanna try OC on strip down OS lo to catchup xixo  u oso nid warm up lo... This post has been edited by cdlim87: Nov 15 2008, 02:33 PM |
|
|
Nov 15 2008, 02:49 PM
Return to original view | Post
#48
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(Najmods @ Nov 15 2008, 02:40 PM) Its 1 sec less than 300x10 beware wor... beter try step by step if x8,,, mayb start frm 380, 390 1st...  I'll try 400x8 next, but for now I got other things to do but ur mobo can consider gem board oledi... can do full HTT...  my cheapo m3a78-em should be can go till 300 max but it walled at above 295.. 295 can boot n orthos cpu test only, test for 2 mins, passed, 298 failed boot thou.. thn lazy try for exact last HTT d... assume 295 is the max bootable HTT.. ---------------------------------------------------------------------------------------------- QUOTE(sepulgilo Posted Today @ 02:38 PM) hahhaa with this can improve a bit of milisec kekekeee damn need to get good ram damn u 10th why la u rosak  [attachmentid=673067] <--26.396 let the 10th to me earlier maa good lor,, so that u dunid broke it... kekekeke This post has been edited by cdlim87: Nov 15 2008, 02:57 PM |
|
|
Nov 15 2008, 03:36 PM
Return to original view | Post
#49
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
@Najmods
yaya.. professional ... kekeke thats y can run 400x8 @sepulgilo hehehe.. 26.270s... improved and improved.... dun gv up... still can catch up... try harder and harder can beat xixo_12 |
|
|
Nov 15 2008, 07:20 PM
Return to original view | Post
#50
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(MENCHELSEA Posted Today @ 04:13 PM) He already found a GEM board I still trying to do SPI below 26 secs . yep.. wrking hard for it... but if can get a pair performance ram lo... value ram not far can go... QUOTE(sepulgilo @ Nov 15 2008, 07:01 PM) done bro all 75ns seems slower by 200ms ask xixo go ur hs ply ply la.... kekekek.... all 105ns also the same This post has been edited by cdlim87: Nov 15 2008, 07:23 PM |
|
|
Nov 16 2008, 12:55 AM
Return to original view | Post
#51
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(ah_khoo @ Nov 16 2008, 12:39 AM) this is default test bro... i'm not so bothered by d low ram freq... more to come after i sort out d temp issue... yo bro... heating up oledi...  thats y lo, beter get a high-end WC, thn can last for a vy long time n suitable for u to ply any proc.. |
|
|
Nov 16 2008, 01:42 PM
Return to original view | Post
#52
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(sheenho @ Nov 16 2008, 12:33 PM) i cant find my thumbdrive,so i just copy through my hdd...haha asus m3a78?? if u really wana noe which part hold u down, u should test 1 by 1.. this is 228mhzx14 » Click to show Spoiler - click again to hide... « this is 214mhzx15 » Click to show Spoiler - click again to hide... « errmm, actually i dun really understand about the setting of ram... hv done quite alot of reading about it,still cant fully understand it...  how do i enclose it? this scale is too big and taking too much space...sori for that... here is the thing that u nid consider: 1. MOBO: -HTT -HT link 2. CPU: -max clock speed of ur proc 3. RAM: -clock speed& timing for ur ram(frm ur ss 228x14 u had OC ur ram heavily.. ram speed=DRAMx2, 450x2=900!!!) advise: beter test out ur mobo's max HTT 1st, so u must lower down HTlink/cpu/ram multiplier to make sure thy not hold u down for testing max HTT.. ------------------------------------------------ add-on: my Vcore 1.47v @3360Mhz , as long as u hv a good cooling system, u still can pump up Vcore for ur proc.. This post has been edited by cdlim87: Nov 16 2008, 01:59 PM |
|
|
Nov 16 2008, 02:01 PM
Return to original view | Post
#53
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(sepulgilo @ Nov 16 2008, 12:17 PM) at last found edi my thermalright mosfet cooler hr09s later can put on replace my cheap cheap ramsink   |
|
|
|
|
|
Nov 16 2008, 02:36 PM
Return to original view | Post
#54
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(mruzian @ Nov 16 2008, 02:18 PM) TS add my SPI score bro.. wat ur core temp whn full load @3400Mhz, 1.44v cool by CCF? 27.265s | mruzian |3400Mhz (340 x 10) | Abit AX78 | 2x1GB Kingmax 1066 | 850MHz & 5-5-5-15-16-2T | Sunbeam Core Contact Freezer  edit: i'm vy interesting with ur matching elite335 with CCF(interesting about its fitting,as CCF quite height 155mm), can share me with some photo?? TQ This post has been edited by cdlim87: Nov 16 2008, 02:39 PM |
|
|
Nov 16 2008, 03:57 PM
Return to original view | Post
#55
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(sepulgilo @ Nov 16 2008, 03:45 PM) got it long long time ago luckly no one want to buy last time i post it up HR09+HR01=HR10..!!! now only ive found it after selongkar my big stacker box » Click to show Spoiler - click again to hide... « thermalright HR-09S no find someting HR for ur PWM ar?? kekekeke This post has been edited by cdlim87: Nov 16 2008, 04:01 PM |
|
|
Nov 16 2008, 06:34 PM
Return to original view | Post
#56
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(mruzian @ Nov 16 2008, 04:09 PM) dat HR09 is for the PWM ohh... yahor.. 4gt d.. js rem last time he say he use ram sink to sink his pwm... i tod sink his ram pula ... -------------------------------------------------------------------------------------------------- @ronaldjoe bro, i saw u bought elite335 frm lalaman.. build new rig ??? This post has been edited by cdlim87: Nov 16 2008, 06:37 PM |
|
|
Nov 16 2008, 08:23 PM
Return to original view | Post
#57
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(MENCHELSEA @ Nov 16 2008, 07:56 PM) Keep up the good work bro... thn how with urs..?? stop working ar..?? Using the ram same as me? BTW can do some cpu temp sharing? wana noe power of CCF.. Added on November 16, 2008, 8:25 pm QUOTE(James_yka @ Nov 16 2008, 08:13 PM) » Click to show Spoiler - click again to hide... « Is this wat i should post ? atleast 2 pages of cpuz: 1. cpu 2. memory This post has been edited by cdlim87: Nov 16 2008, 08:25 PM |
|
|
Nov 16 2008, 10:54 PM
Return to original view | Post
#58
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(sheenho Posted Today @ 08:26 PM) im jz using m3a... b4 this, ive tried lowered my multiplier to 5x... and the highest bus speed can reach is oni 249mhz... once reach 250mhz my pc cant even go into bios.. and,how do i lower the ram divider? i tot it is something relates to cpu multiplier.. yup.. related to cpu multiplier.. but u can still can chose ur self.. refer to 1st page of this thread divider table.. good thingy uploaded free by TS y dun1 use.. hope that help u a lot.. ------------------------------------------------------------------------------------------------------------ QUOTE(tachlio Posted Today @ 10:08 PM) OT: currently what GC best for bang?? i looking for 4670 with around 310++ but someone does tell me go for 9600gt around 350++ i mainly find for a gc that low power consume and best for bang 9600gt 512MB 256bit; 4670 512MB 128bit only *personally will not go for 128bit card that above RM300 as at this price can go for 256bit This post has been edited by cdlim87: Nov 16 2008, 10:55 PM |
|
|
Nov 16 2008, 10:59 PM
Return to original view | Post
#59
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(ah_khoo @ Nov 16 2008, 10:56 PM) new update but aint so impressive thou... » Click to show Spoiler - click again to hide... « nice Vcore there, sifu..!!!! seem still lot space to push wor.. edit: but fail test..?? This post has been edited by cdlim87: Nov 16 2008, 11:00 PM |
|
|
Nov 16 2008, 11:03 PM
Return to original view | Post
#60
|
|
Senior Member
2,220 posts Joined: Sep 2008 From: PJ
|
QUOTE(MENCHELSEA @ Nov 16 2008, 11:02 PM) U are burning out your chipset ..... haha.......... he need nice cooling for every part... 61C |
|
Topic ClosedOptions
|
| Change to: |  0.0392sec
 0.14
 7 queries
 GZIP Disabled
Time is now: 27th November 2025 - 05:27 PM |
Quote
