hello guys. new ep45-ud3p user reporting. just got tis board 2 days ago and been clocking all day long. i'm new in oc'ing and tis is my result. i think the temp is very high. hope to get some comments and advices from all the sifu here. my vcore in bios is 1.3 and dram voltage at 2.0, spd is 2.0, ram timing is 5-5-5-15. i'm using 2x1gb kingston hyper x 1066 ddr2 and cooler master n620 hsf. i guess i got the wrong hsf.


Attached thumbnail(s)

uzer85, thx for fast reply. actually wat i saw from many forums r ppl would recommend temp below 65 is safe temp and i also saw tat other ppl can do better fsb wif lower temp. the temp u see in my attachment is the idle temp. when full load it will reach 66 to 68. i hope to get some advices to lower my temp. thx

thx ZeneticX for replying. i'm using cooler master n620. the link below is the spec of the hsf.

http://www.coolermaster.com/products/produ...bcate=1&id=6001

beside the temp, wat u guys think about the oc? any comment? thx in advance.

i would go for 515 x 8 instead of 460 x 9 because from wat i heard is higher fsb is better. correct me if i'm wrong. thx

beside, i will try to resit the hsf and see wat happens. at the same time, i'm thinking to get a TRUE extreme 120. i heard alot of good feedback for tis hsf. thinking how to settle my old hsf if i would get a new 1.

this is wat i did.

CPU clock ratio: 8
CPU host frequency: 800
PCI express frequency: 100
performance enhance: turbo
SPD: 2
timing: 5-5-5-15
vcore: 1.3
dram voltage: 2.0
C1E: disable
EIST: disable
Virtualization tech: disable

and the rest are default.

---

Added on March 4, 2009, 1:45 ami might consider about tis xinggie. thx for ur recommendation. beside, how can i sell my old stuff? i have an asus p5ql pro and the hsf tat i would like to sell them.

thx.



This post has been edited by zerohunter: Mar 4 2009, 01:45 AM

thx for ur link. i ady posted my item there. beside, do u mind to share ur bios template coz i see we have the same proc, same mobo just different brands of ram. thx.

thx for the screenie. anyway wat is super p1? sorry for a noob question coz i'm new in oc'ing. thx.

hi there. i ady got true 120 and my temp still quite high like no changes. the full load on 400x8 still 62 degree. headache about it.

i think it's stick to the proc. maybe my way to apply the thermal paste was wrong? any guide to apply the paste correctly? i just put a drop at the center of the proc and screwed it.

thx for the guide. shud i apply the same way to the proc too?

thx. let me try it out now and will let u know the result soon. thx.

---

Added on March 5, 2009, 2:20 amsorry bro, it's not working. still the same temp.

This post has been edited by zerohunter: Mar 5 2009, 02:20 AM

below are the ss of idle and full load.

idle


full load

tat is the temp after 30 sec full load. now after 7 min it up to 63 degree.

alrite, i will try it later, thx.

anyway how about ur temp at idle and full load?

wow so fast they have come out with the ddr3 one.

hi, just wanna share my oc result and get some advice from all the sifu here. gimme some comment about my oc, thx.


Attached thumbnail(s)

i actually saved my setting in my pendrive. if u wan it i can send it to u but i need ur email add. thx.

hi, zeneticx, i just sent u the setting. check ur mail.

hi ZeneticX, do u mind to let me know ur idle temp and full load temp at ur current oc? thx.

isn's tat 70-73c a high temp? is it safe? is ur pc always running at tat fsb on 24/7?