notice from gigabyte's website that the EP45-UD3R is supporting Dolby Home Theater?!? anyone got it to work in UD3R??

the thing is, the Dolby Home Theater feature wasn't listed on the site when i purchse my UD3R some times ago.. just wondering if it's an error on the page, or it's meant for rev 1.1 board or the feature can be enabled by just driver update??

guys when i enable the DES on my EP45-UD3R, the power LED on the casing goes on and off randomly. however, the LED stays on if i turn off the DES. have anyone experienced this? wondering if it has anything to do with the MCH core??

i've tested it on different casing but no difference.. fyi, i'm running E8400 at 4.05Ghz (1.136v). LLC, C1E and EIST are enabled, Vcore set to 1.17500V, DRAM voltage set to 2.000V, the rest all set to Auto

This post has been edited by kuanhon: May 13 2009, 04:29 PM

the phase LED on motherboard is off when DES is disabled, 3~4 phases light up when DES is enabled and 5~6 phases light up when CPU is under load..

the one i'm concerning is the power LED on the casing.. the LED is suppose to light on the moment we switch on the system and light off when system is swich off but in my case, the power LED is turning on and off randomly while the system is running and only when DES is enabled.. doesn't feels right, anyone experienced this??

okay thanks, kinda glad to hear that, at least it's not only my problem

not a big deal anyway, just that i may not know my pc is running or not if the HDD LED is not blinking too and i don't look at the side panel...