2oz Copper PCB Mobo OC Discussion

Lowyat.NET forums

Lowyat.NET Kopitiam Garage Sales

Lowyat.NET Rules and Regulations FAQ Help Search Members

Welcome Guest ( Log In | Register )

Lowyat.NET -> Overclockers United

Bump Topic Add Reply RSS Feed

4 Pages 1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

2oz Copper PCB Mobo OC Discussion, Gigabyte UD3 P45 Series UD3/UD3R/UD3P

views

hengmy	Dec 4 2008, 03:43 PM Return to original view \| Post #1
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	can ifx-14 fix this board?
Card PM	Report Top Like Quote Reply

hengmy	Dec 13 2008, 01:18 AM Return to original view \| Post #2
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(danieljoey @ Dec 12 2008, 01:05 AM) Hi, new EP45-UD3R user reporting in. The mobo is awesome. Good OC and cheap. This is similar to Biostar T-Power I45. My oc result 4.4GHz on air cooling. Low FSB due to air cooling. OC result validation at my siggy. haha, i just got the EP45-UD3P also.. really awesome board for quadcore some testing.. 510fsb 500fsb pl8 500x8 4ghz ibt past
Card PM	Report Top Like Quote Reply

hengmy	Dec 13 2008, 09:37 PM Return to original view \| Post #3
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(danieljoey @ Dec 13 2008, 04:24 PM) I see my old Q9450 in action.. thx so much bro QUOTE(tkh_1001 @ Dec 13 2008, 05:58 PM) ncie result hengmy ape bende u adjust kat bios? thx, i adjust all those setting inside bios that can adjust, it easily can boot at 500fsb, but to stable it need to adjust those GTL REFs. QUOTE(Dickong @ Dec 13 2008, 07:12 PM) Your core temp is quiet low, wonder whether u are inside a/c room, if not what heatsink r you using. it idle on air con room, i am using TR IFX 14
Card PM	Report Top Like Quote Reply

hengmy	Dec 14 2008, 01:48 AM Return to original view \| Post #4
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(tkh_1001 @ Dec 14 2008, 01:12 AM) hmm...u mean adjsut the cpu REF? that one so many value i saw in my fren's ud3p... if trial and error adjust till sienz ya, i must adjust the cpu ref to get it stable, if leave it auto, it cant pass prime or IBT. i use this formula to count, but i dont know it right o not. it default 0.76/1.2vtt=0.633(45nm) i set cpu vtt to 1.34 so 1.34x0.633=0.848 ~ 0.84-0.85 btw, i using F4 bios after adjusting, i can prime almost 5 hours This post has been edited by hengmy: Dec 14 2008, 01:52 AM
Card PM	Report Top Like Quote Reply

hengmy	Dec 15 2008, 01:47 AM Return to original view \| Post #5
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(Jibek @ Dec 15 2008, 01:22 AM) @hengmy hi bro.,can u share the bios template with us..tq hmm, how to extract the bios template?
Card PM	Report Top Like Quote Reply

hengmy	Dec 15 2008, 02:06 PM Return to original view \| Post #6
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	@Jibek have to type ourself? or can copy paste?
Card PM	Report Top Like Quote Reply

hengmy	Dec 15 2008, 05:34 PM Return to original view \| Post #7
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(Jibek @ Dec 15 2008, 02:15 PM) just copy paste it bro.. i not understand.. where can i copy and paste my bios setting? from where? need to use any software any software?
Card PM	Report Top Like Quote Reply

hengmy	Dec 15 2008, 08:34 PM Return to original view \| Post #8
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(Jibek @ Dec 15 2008, 05:55 PM) ohh.,sorry..you need to copy it down.,and the use the template that i gave u..if u can make it really appreciate it..tq oic, i tot can straight copy n paste.. i will do it when i free, gimme some time
Card PM	Report Top Like Quote Reply

hengmy	Dec 18 2008, 03:09 AM Return to original view \| Post #9
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(mfcm @ Dec 17 2008, 07:52 PM) erm any result using 65nm quaddie on UD3P?for 45nm quaddie seem really nice clock..wonder if 65nm quaddie also gv same result @hengmy try oc higher?or max oredi?any pro n con from ur POV bout this mobo? no time to oc higher now.. i think 65nm quaddie should be easier to do 500fsb on this board, if the processor fsb wall is not reached, since it can take higher vtt. from my pov, Pros: -very ocable on quad, 500fsb stable not a dream -bundle with esata bracket, with power cord -affordable -cpu's energy saver work even after overclock Cons: -not 8 phase power, not really good for a high quad ocable board -no onboard on/off button -cant fit my ifx-14 vertically
Card PM	Report Top Like Quote Reply

hengmy	Dec 24 2008, 10:11 PM Return to original view \| Post #10
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(mfcm @ Dec 23 2008, 07:25 PM) eh bro where the bios template fast fast put it in here bro okok bro, i will put it in a sec. QUOTE(k!nex @ Dec 24 2008, 02:19 PM) yesterday my fren bought the EP45-UD3R. compare wif his previous Biostar P43 mobo, dis UD3R boots at bios much slower(the gigabyte logo there). wanna ask UD3P users, is it the same with u all?? overclock potential for UD3R and UD3P is it the same? since both also 6 phase power (UD3L has 4 phase power),and the only difference i noe is UD3P has crossfire option only. both have equally OC capabilities QUOTE(gulhalim @ Dec 24 2008, 03:23 PM) hello guys, just wondering what kind of cooler have you all been using with this EP45 UD3P. Planing to get CCF but it doesn't fit the mobo. using ifx14, can fit horizontally Added on December 24, 2008, 10:57 pmhere is my setting for 500fsb, sorry for late » Click to show Spoiler - click again to hide... « MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: [Turbo] CPU Clock Ratio .......................: 8x Fine CPU Clock Ratio...................: .0 CPU Frequency .........................: 4000 Clock Chip Control Standard Clock Control CPU Host Clock Control...................: [Enable] CPU Host Frequency (Mhz) ................: 500Mhz PCI Express Frequency (Mhz) .............: 100 C.I.A.2 .................................: [Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive.......................: 1000mv PCI Express Clock Drive...............: 1000mv CPU Clock Skew (ps)...................: 50ps MCH Clock Skew (ps)...................: 50ps DRAM Performance Control Performance Enhance..................: [STANDARD] (G)MCH Frequency Latch...............: [400] System Memory Multiplier ............: 2.00d Memory Frequency (Mhz) ..............: 1000 DRAM Timing Selectable ..............: [manual] Standard Timing Control CAS Latency Time........................5 tRCD ...................................5 tRP'....................................5 tRAS....................................15 Advanced Timing Control tRRD..........................................:auto tWTR..........................................:auto tWR...........................................:auto tRFC..........................................:auto tRTP..........................................:auto Command Rate (CMD) ...........................:2 Driving Strength Profiles Driving Strength Channel A Static tRead Value.....................:9 tRD Phase0 Adjustment..................:auto tRD Phase1 Adjustment..................:auto tRD Phase2 Adjustment .................:auto tRD Phase3 Adjustment..................:auto Trd2rd(Different Rank).................:auto Twr2wr(Different Rank).................:auto Twr2rd(Different Rank).................:auto Trd2wr(Same/Diff Rank).................:auto Dimm1 Clock Skew Control...............:auto Dimm2 Clock Skew Control...............:auto Channel B Static tRead Value.....................:9 tRD Phase0 Adjustment..................:auto tRD Phase1 Adjustment..................:auto tRD Phase2 Adjustment .................:auto tRD Phase3 Adjustment..................:auto Trd2rd(Different Rank).................:auto Twr2wr(Different Rank).................:auto Twr2rd(Different Rank).................:auto Trd2wr(Same/Diff Rank).................:auto Dimm1 Clock Skew Control...............:auto Dimm2 Clock Skew Control...............:auto Motherboard Voltage Control CPU Load-line Calibration [Enable] CPU Vcore......................... : 1.33125v - cpu dependent CPU Termination…....1.200v...........: 1.34 CPU PLL............ 1.500v...........: 1.61 CPU Referen.........0.760v...........: 0.845 MCH/ICH MCH Core..............1.100v............: 1.500v MCH Reference.........0.760.............: auto MCH/DRAM Ref..........0.900V............: 1.040v ICH I/O...............1.500V............: normal ICH Core..............1.100V............: normal DRAM DRAM Voltage ............1.000v............: 2.080v - ram dependent DRAM Termination.........0.900V............: 1.040v Channel A Reference......0.900V............: 1.040v Channel B Reference......0.900V............: 1.040v Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect.................: [Disabled] CPU Enhanced Halt (C1E)...................: [Disabled] C2/C2E State Support......................: [Disabled] x C4/C4E State Support....................: [Disabled] CPU Thermal Monitor 2(TM2) ...............: [Disabled] CPU EIST Function.........................: [Disabled] Virtualization Technology.................: [Disabled] This post has been edited by hengmy: Dec 24 2008, 10:57 PM
Card PM	Report Top Like Quote Reply

hengmy	Dec 24 2008, 11:29 PM Return to original view \| Post #11
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(mfcm @ Dec 24 2008, 11:12 PM) eh bro u using F7a bios? erm btw for CPU Termination,CPU PLL and CPU Referen how u determine it? i using f4 bios, got f7 ady? cpu termination i set 1.34, coz do not want to set more than 1.35v cpu pll i follow my previous setting for my dfi LT x48.. cpu ref i calculate by 1.34x0.63, also referring to gtl tweak for my previous dfi board
Card PM	Report Top Like Quote Reply

hengmy	Dec 25 2008, 07:00 PM Return to original view \| Post #12
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(gulhalim @ Dec 25 2008, 02:25 PM) waa that is over my budget, anything less around RM150-170? deepcool ice blade pro, rm110-120 only
Card PM	Report Top Like Quote Reply

hengmy	Dec 29 2008, 12:22 PM Return to original view \| Post #13
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	i might let go this mobo, ep45-ud3p, anyone interested? btw, one of the lan port is not working
Card PM	Report Top Like Quote Reply

hengmy	Dec 29 2008, 01:53 PM Return to original view \| Post #14
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	sold my quadcore, may dfi dk p45, can trade also. hehe
Card PM	Report Top Like Quote Reply

hengmy	Dec 31 2008, 01:02 PM Return to original view \| Post #15
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	anyone got the setting for 500fsb x9 4.5ghz for dualcore stable? can share out? thx
Card PM	Report Top Like Quote Reply

hengmy	Jan 1 2009, 03:21 AM Return to original view \| Post #16
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(Jibek @ Jan 1 2009, 01:46 AM) Hi all.,happy new year.. i want to make this setting for my 24/7.,is it ok?i cool the ram with Corsair Dominator Airflow for 2.1v.. the vcore still can lower??
Card PM	Report Top Like Quote Reply

hengmy	Jan 1 2009, 11:26 PM Return to original view \| Post #17
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(Jibek @ Jan 1 2009, 03:43 AM) @hengmy i'll try to lower the vcore later.,because when low vcore i can't play games.,BSOD or hang during gaming.. @gamers_maniac this is the everest score bro.. can tweak to pl8? then the read speed will >10k
Card PM	Report Top Like Quote Reply

hengmy	Jan 2 2009, 01:39 AM Return to original view \| Post #18
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(Jibek @ Jan 2 2009, 01:01 AM) This is the PL8 score bro.. wow, nice is it prime stable? can share out your bios template? thx
Card PM	Report Top Like Quote Reply

hengmy	Jan 2 2009, 03:39 AM Return to original view \| Post #19
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	QUOTE(lightonokira @ Jan 2 2009, 03:30 AM) UD3P/UD3R wich one is better? in price and performance both are same in OC performance. ud3p come with CF, dual gigabit lan etc, u might need to take into consideration when deciding which one to get Added on January 2, 2009, 3:41 am QUOTE(Jibek @ Jan 2 2009, 02:53 AM) No problem bro.,i'll post later ok..i need to write down first.. thx so much This post has been edited by hengmy: Jan 2 2009, 03:41 AM
Card PM	Report Top Like Quote Reply

hengmy	Jan 3 2009, 11:57 PM Return to original view \| Post #20
Regular Senior Member 1,991 posts Joined: Jan 2007 From: Seri Kembangan	new result with dualcore e8400.. found that this board dont like high voltage, Vnb 1.22v ady can do 500fsb cl8 stable... Added on January 4, 2009, 12:03 am QUOTE(alpha_company @ Jan 3 2009, 07:08 PM) ok...i got a question about the dual gigabit lan.. how to use it? can a normal user utilize it? got a ud3p here.. dont know what the use of it, coz single port ady gigabit lan This post has been edited by hengmy: Jan 4 2009, 12:03 AM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

« Next Oldest · Overclockers United · Next Newest »

4 Pages 1 2 3 > » Top

Add Reply Options

Change to:

0.0318sec

0.34

7 queries

GZIP Disabled
Time is now: 4th December 2025 - 09:43 AM

All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)

Removal Request

Powered by Invision Power Board © 2025 IPS, Inc.