MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: auto
CPU Clock Ratio .......................... 9X
Fine CPU Clock Ratio.....................: 0.0
CPU Frequency ...........................: 3.60 ghz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400
PCI Express Frequency (Mhz) .........:100

C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mV<<<
PCI Express Clock Drive.................: 900mV<<<
CPU Clock Skew (ps)....................:0 <<<
MCH Clock Skew (ps)...................: 0<<<
DRAM Performance Control
Performance Enhance...................: [standard]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............: 2.00D
Memory Frequency (Mhz) ..............: 800
DRAM Timing Selectable ................: (SPD)

Standard Timing Control
CAS Latency Time........................ 4
tRCD ......................................... 4
tRP'........................................... 4
tRAS.......................................... 12
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
Load-Line Calibration: Disabled
CPU Vcore….……….........................: 1.33750v
CPU Termination…..... 1.200V*.......: 1.24
CPU PLL…………………....1.500V*.......: Auto

CPU Referen.…………....0.755V*.......:Auto

CPU Reference2………,,0.800V*.......:Auto
MCH/ICH
MCH Core…………….....1.100V...........: 1.2
MCH Reference….…….0.800V...........; Auto
MCH/DRAM Ref.…......0.900V...........: Auto
ICH I/O……………….....1.550V............: Auto
ICH Core…………...……1.100V............: Auto

DRAM
DRAM Voltage ……....1.800V............: 2.1
DRAM Termination .…0.900V............: Auto
Channel A Reference 0.900V............: Auto
Channel B Reference 0.900V............: Auto
Ps:Other than that i put Auto

Btw,thanks in advance for helping me 

---

Added on October 17, 2009, 4:58 amim wondering why it shows my ram pc2-6400 in cpu-z(in fact my ram is  pc2-8500),of course if it show pc2 6400,means the mhz only 800mhz and i can only get 1:1 if my fsb is 400mhz.This is the cpu-z :


sorry,how to get clear image?

---

Added on October 17, 2009, 5:16 am
after u disabled the C1E and CPU EIST,then LOAD OPTIMIZED DEFAULT.
then cpu-z will recognize your proc speed correctly as what i've done.