I read about this UD3P board and according to them, it works great with plenty of overclocking potential. However, I haven't had a chance to try as yet.
2oz Copper PCB Mobo OC Discussion, Gigabyte UD3 P45 Series UD3/UD3R/UD3P
|
|
 Nov 5 2008, 03:32 PM
Return to original view | Post
#1
|
 
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur    
|
|
Quote|
|
|
|
|
Nov 5 2008, 08:33 PM
Return to original view | Post
#2
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
There are so many choices of good RAM's these days with reasonable prices
 |
|
|
Jan 8 2009, 10:00 AM
Return to original view | Post
#3
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(RacingTech @ Jan 8 2009, 08:08 AM) tonight gonna stress the cpu and see whether it is stable or not... !!! but one damn problem is from the psu, it cant power up my 3rd HDD... it just dont work until i plug in another psu to tat HDD... damn psu... !!!! Are you sure it's the PSU? I'm using Odin 550W and I have 3 x HDD's, 1 x CDROM, 1 x 8800GT, X-Fi Elite Pro and watercooling pump plus lots of fan and it works like a charm for almost a year now   |
|
|
Jan 8 2009, 11:42 AM
Return to original view | Post
#4
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
GT or PRO gives the same output and the only difference is the expensive one has the software and sensor. I'm using the cheaper version and have an APC SmartUPS 750 running under my desk. I'm pretty sure it can power your rig or the PSU might be faulty?
|
|
|
Jan 8 2009, 11:50 AM
Return to original view | Post
#5
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
Yup, 550W is quite a bit of power. The APC light only shows 2 bars but the moment I start Orthos, it became 3
|
|
|
Jan 8 2009, 07:33 PM
Return to original view | Post
#6
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(RacingTech @ Jan 8 2009, 03:47 PM) how about your voltage monitoring, i found tat the negative value is crazy.. exp -12v reading come back -18 or something tat wasnt close to 12!!! please let me know your reading... i want to make sure whether my psu is spoiled or not..... The reading differs from one board to another so it's not a straight off comparison unless we're using the same board. Even so, it might not be 100% identical. |
|
|
|
|
|
Jan 9 2009, 02:08 PM
Return to original view | Post
#7
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(RacingTech @ Jan 9 2009, 10:49 AM) Tried again with my psu and it just dont like my HDD, when i put in other HDD, it able to detect 3 HDD together. i did tried to take out one of the working one n put this "special" hdd, it also dont work but if i use this hdd on my old pc, it work n running great!!!!! Maybe that particular hard disk has problems?  dono wat the hell is going on??? What drive is that btw? |
|
|
Mar 18 2009, 01:58 AM
Return to original view | Post
#8
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(pennykia @ Mar 16 2009, 12:31 PM) 1 silly noob question... Set it to 1:1 my FSB:DRAM = 1:2 good or worst? |
|
|
Mar 20 2009, 02:40 AM
Return to original view | Post
#9
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(pennykia @ Mar 18 2009, 03:36 PM) i'm upgrading my old pc.... You should get a C2D and overclock it somemore i got my UD3P mobo, ocz reaper 1200mhz, and a antique PEntium D945(3.4mhz, 200 fsb) , overclocked to 260*17... jus wondering which setting is optimize for .... i used this processor as learning exp, and i just lapped my proc (10 celsium dropped). will buy new proc next month.... You'll get more fun since most of them hits 4Ghz easily. I don't think you'll get a 10C drop on a C2D but you can give it a try. |
|
|
Mar 20 2009, 10:27 PM
Return to original view | Post
#10
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
You can use a software called "Core Temp" as it'll give you a more reliable reading.
|
| Change to: |  0.0180sec
 0.34
 7 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 06:23 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.