2oz Copper PCB Mobo OC Discussion, Gigabyte UD3 P45 Series UD3/UD3R/UD3P
|
|
 Mar 10 2009, 10:12 PM
Return to original view | Post
#1
|
 
Junior Member
193 posts Joined: Jun 2006 From: Kuala Lumpur  
|
QUOTE(piumiu @ Mar 10 2009, 10:05 PM) I cant install vista using this motherboard. Its seems unable to detect its hardisk. What is the best setting for this? Please help. I can install 64 bit vista ultimate. at UD3P. |
|
|
|
|
|
Apr 22 2009, 01:21 AM
Return to original view | Post
#2
|
|
Junior Member
193 posts Joined: Jun 2006 From: Kuala Lumpur
|
Hi people, can you guys help me out? trying to OC my rig but failed. reboots 3 times after done setting up in bios..
 My rig :  CPU - QX6800 Mobo - EP45-UD3P RAM - Patriot ram xtreme 4*1gb (800) GPU - Gigabyte HD4850 PSU - Corsair TX 750w CASING - Raidmax Ninja LCD - Samsung 2233sw HDD - WD 640gb OS - Vista ultimate 64 bit. Trying to get 3.6ghz @ ratio 1:1 ! hope you guys can help me out!! THANKS !!  
This post has been edited by aHceNt: Apr 22 2009, 01:22 AM |
|
|
Apr 22 2009, 04:45 PM
Return to original view | Post
#3
|
|
Junior Member
193 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(ham_revilo @ Apr 22 2009, 08:16 AM) @aHceNt hmm. i didn't even manage to get into my OS. just auto reboot after setup at bios then return to default. @ 2.93 ghz. hmmmm..what software do you use to stress your proc? could it be your RAM that cause the trouble? |
|
|
Apr 22 2009, 06:58 PM
Return to original view | Post
#4
|
|
Junior Member
193 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(uzer85 @ Apr 22 2009, 05:11 PM) have try different strap? 333/200 maybe? havent try. give it a try later.QUOTE(ham_revilo @ Apr 22 2009, 05:53 PM) is it possible to show us your bios setting? i mean the settings that you tried to use and fail to reboot CPU CLOCK RATIO : 9 FSB : 400 = 3.60ghz VCORE : 1.33750V MCH CORE : 1.400v DRAM Voltage 2.000v those are what i've adjusted. and i've few question. sorry for being so Noob. WHAT IS: C.I.A ( left Disabled ) [Defaul] Advanced Clock Control ( didn't touch at all) DRAM Timing ( i didn't adjust left auto) ( i know what is this) (for ur info only) CPU Termination 1.200v [auto] CPU PLL 1.500v [auto] CPU REFERENCE 0.760v [ auto ] MCH REFERENCE 0.760v [auto] MCH/DRAM REFERENCE 0.900 [auto] ICH I/O 1.500v [auto] ICH CORE 1.100v [auto] DRAM Termination 0.900v [auto] Channel A Reference 0.900v [auto] Channel B Reference 0.900v [auto] |
|
|
Apr 23 2009, 12:53 AM
Return to original view | Post
#5
|
|
Junior Member
193 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(gamers maniac @ Apr 22 2009, 08:22 PM) i think the vcore is to low to boot at 3.6g...unless ur proc is a gem. try pumping vcore until u can boot. oh so vcore is the prob actually? hmmm...but why i run 3.3 ghz at stock can. 3.2 ghz at stock cannot ? quite weird right??? QUOTE(bobiac @ Apr 22 2009, 10:04 PM) eh isnt his mch core too high? before i set to 1.4 i was using 1.2 if not mistaken.. still can't boot.. :*(normal 1.2 rite? since 4x4 is 1600 no need pump too much. later too hot. oso put other setting to normal. dun leave it auto. later u pc pump out too much. oso try 1.375 vcore. if can boot try prime. QUOTE(gamers maniac @ Apr 22 2009, 11:39 PM) mch should be set 1.2~1.3v depend on ur chip. 1.4v is to much IMO i know... but 1.4 was suggested by a fren here. so i just give it a try.. but still can't boot. what to do.... |
|
|
Apr 23 2009, 05:56 PM
Return to original view | Post
#6
|
|
Junior Member
193 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(uzer85 @ Apr 23 2009, 08:39 AM) yup. it's MCH voltage. pump it a little bit. happen to me before, using 3.6ghz at 1.337Vcore 450x8. no prob at all. aiyo... but i'm a budget user leh.. just bought this whole rig like Feb only??  @Ahcent try use different strap, but seriously, ur ram is pushing u back. get 1066 kit ram n u'll be happy with ur rig. UD3P (ur mobo) is great for quaddies n high fsb. but ur ram.................. don't wanna spend la..... SOB.. Added on April 23, 2009, 5:59 pm QUOTE(ham_revilo @ Apr 23 2009, 01:29 AM) imo, for quad core, its not easy to achieve 3.6ghz. maybe your vcore is a lil low for 3.6ghz. and for 65nm you still able to push your vcore a lil more. try increasing it to 1.4v or 1.425v. just make sure that your cooler can handle the temp and try not to exceed 70-80c on long run. quaddie are known for their high temp ahhh.. later i try give it more voltage... if you have the extra time, try tweaking the CPU Termination and PLL Voltage. increase bit by bit. and like bobiac said, dont put those option to Auto. your mobo will increase those voltage and its dangerous for your mobo. and also your MCH core voltage is a lil high. iinm, the default is 1.1v or 1.2v only right? another thing is your RAM. use 1:1 ratio and if you wanna go for higher fsb, try using only 2 sticks of RAM (2*1GB). 4*1GB is not OC friendly ahhhhh... why is 4 stick ram not good? sob.. i thought it would be better as i ask some sifu here... sigh... This post has been edited by aHceNt: Apr 23 2009, 05:59 PM |
|
|
Apr 23 2009, 08:44 PM
Return to original view | Post
#7
|
|
Junior Member
193 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(uzer85 @ Apr 23 2009, 06:04 PM) aiyo. sell ur 800 kit ram, i think can get 2x1gb 1066 n maybe 2x2gb. okay.... T_T will pm u later ya. ppl say that 2x1@4x1gb is better for OCing. nvr had one, so dont know. use 2x2gb right now. anyways, try different strap n oso, try with just 2 stick only.  |
| Change to: |  0.0357sec
 0.55
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 08:35 PM |
Quote