Outline ·
[ Standard ] ·
Linear+
2oz Copper PCB Mobo OC Discussion, Gigabyte UD3 P45 Series UD3/UD3R/UD3P
|
hengmy
|
 May 14 2009, 05:41 PM
|
|
QUOTE(kuanhon @ May 13 2009, 04:22 PM) guys when i enable the DES on my EP45-UD3R, the power LED on the casing goes on and off randomly. however, the LED stays on if i turn off the DES. have anyone experienced this? wondering if it has anything to do with the MCH core?? i've tested it on different casing but no difference.. fyi, i'm running E8400 at 4.05Ghz (1.136v). LLC, C1E and EIST are enabled, Vcore set to 1.17500V, DRAM voltage set to 2.000V, the rest all set to Auto the led show how many phases of power it use when enable, if u off the des, all phases are using so all led light up. btw, was impressed that your e8400 running at 4.05ghz with 1.136v  |
|
|
|
|
|
kuanhon
|
May 14 2009, 11:34 PM
|
Getting Started
|
the phase LED on motherboard is off when DES is disabled, 3~4 phases light up when DES is enabled and 5~6 phases light up when CPU is under load..
the one i'm concerning is the power LED on the casing.. the LED is suppose to light on the moment we switch on the system and light off when system is swich off but in my case, the power LED is turning on and off randomly while the system is running and only when DES is enabled.. doesn't feels right, anyone experienced this??
|
|
|
|
|
|
imran78
|
May 15 2009, 03:54 AM
|
Getting Started
|
i think thats normal, mine also the same
only when DES is on, the casing led will flash on and off
not only us, few other people also get the same flashing leds on DES
|
|
|
|
|
|
kuanhon
|
May 15 2009, 04:39 PM
|
Getting Started
|
okay thanks, kinda glad to hear that, at least it's not only my problem  not a big deal anyway, just that i may not know my pc is running or not if the HDD LED is not blinking too and i don't look at the side panel... |
|
|
|
|
|
yimingwuzere
|
May 17 2009, 05:06 PM
|
|
|
screenshotSo finally I have the time to play with my board. First attempt running @ 3.6 gig. Using a CM Hyper 212 for cooling, inside an Antec 900 case. Ambient temp is a crazy 34C  Anyway, what software can get the MCH or northbridge temps? The NB heatsink seems a little too hot for my liking. This post has been edited by yimingwuzere: May 20 2009, 10:59 AM
|
|
|
|
|
|
uzer85
|
May 28 2009, 09:52 AM
|
|
|
this thread is so dead...
have anyone try F9 bios? if no different from F6 (which i use now), i wont flash it. oredi have the F9 file. now waiting for others opinion...
|
|
|
|
|
|
gamers maniac
|
May 28 2009, 09:27 PM
|
|
|
in bios (UD3P) which one is the option to set the performance level?
|
|
|
|
|
|
AceCombat
|
May 28 2009, 11:02 PM
|
|
|
E8400 E0 OC Vendetta II UD3R Hyper X T1 1066MHz 2x2GB Guys,can i have 500*9 bios setting? those voltage like GTL,MCH,PLL,VTT and etc.... thanks guy  |
|
|
|
|
|
ZeneticX
|
May 28 2009, 11:04 PM
|
|
|
QUOTE(gamers maniac @ May 28 2009, 09:27 PM) in bios (UD3P) which one is the option to set the performance level? what performance level u mean?the rams? |
|
|
|
|
|
gamers maniac
|
May 28 2009, 11:10 PM
|
|
|
QUOTE(ZeneticX @ May 28 2009, 11:04 PM) what performance level u mean?the rams? yup, performance level for the ram..  |
|
|
|
|
|
ZeneticX
|
May 28 2009, 11:18 PM
|
|
|
its in the manual book
MIT - DRAM Performance Control
|
|
|
|
|
|
farscope
|
Jun 1 2009, 08:24 PM
|
|
|
sorry.. a simple question here.
how to set RAM:FSB 1:1 ratio? (my proc is 266.7Mhz)
can i maintain 3:2 ratio and OC? this means i m OC-ing my ram too?
how high can a KVR DDR2 800Mhz OC with 3:2 ratio? or i should set it to 1:1 before proceeding to OC?
Using EP455-UD3L..
|
|
|
|
|
|
bobiac
|
Jun 1 2009, 10:30 PM
|
|
|
QUOTE(farscope @ Jun 1 2009, 08:24 PM) sorry.. a simple question here. how to set RAM:FSB 1:1 ratio? (my proc is 266.7Mhz) can i maintain 3:2 ratio and OC? this means i m OC-ing my ram too? how high can a KVR DDR2 800Mhz OC with 3:2 ratio? or i should set it to 1:1 before proceeding to OC? Using EP455-UD3L.. set ur memory to limit at ddr2-533. so u will have 1:1 ratio. now happy OCing. |
|
|
|
|
|
farscope
|
Jun 1 2009, 10:51 PM
|
|
|
QUOTE(bobiac @ Jun 1 2009, 10:30 PM) set ur memory to limit at ddr2-533. so u will have 1:1 ratio. now happy OCing. oh thanks.. i m juz OC-ing with stock HSF.. dun hav extra money to get custom cooler.. slowing pushing the FSB onli.. haven up any Vcore yet.. if wanna add Vcore is set at the +10mV there? or sth like tat.. so far juz push 100Mhz onli, idle temp still at 38°C.. |
|
|
|
|
|
bobiac
|
Jun 1 2009, 10:52 PM
|
|
|
QUOTE(farscope @ Jun 1 2009, 10:51 PM) oh thanks.. i m juz OC-ing with stock HSF.. dun hav extra money to get custom cooler.. slowing pushing the FSB onli.. haven up any Vcore yet.. if wanna add Vcore is set at the +10mV there? or sth like tat.. so far juz push 100Mhz onli, idle temp still at 38°C.. oh ya i need to know ur proc 1st |
|
|
|
|
|
farscope
|
Jun 1 2009, 10:54 PM
|
|
|
oh sorry sorry.. it's E7400.. wolfdale.. 3MB L2 cache..
stock 2.8Ghz, clock 266.7x10.5.. 45nm..
|
|
|
|
|
|
bobiac
|
Jun 2 2009, 12:00 AM
|
|
|
QUOTE(farscope @ Jun 1 2009, 10:54 PM) oh sorry sorry.. it's E7400.. wolfdale.. 3MB L2 cache.. stock 2.8Ghz, clock 266.7x10.5.. 45nm.. juz push it till the vcore cannot past bios and up a lil bit at a time. dual core dun need a very high voltage lol. |
|
|
|
|
|
Kidz1995
|
Jun 2 2009, 12:53 PM
|
|
|
Hello guys im Gigabyte Motherboard User im very new to OC so please comments something about my E8400@4.1ghz i read somewhere in the internet..RAMs may give trouble when OC-ing if we did not manage it correctly..really need help on this  i already post the screen..if got something wrong please tell me TQ  i downclock the timings.before it was 5-5-5-18 to 5-5-5-15This post has been edited by Kidz1995: Jun 2 2009, 12:54 PM Attached thumbnail(s)
|
|
|
|
|
|
kingballack
|
Jun 2 2009, 12:57 PM
|
New Member
|
|
|
|
|
|
|
ZeneticX
|
Jun 2 2009, 03:45 PM
|
|
|
QUOTE(Kidz1995 @ Jun 2 2009, 12:53 PM) Hello guys im Gigabyte Motherboard User im very new to OC so please comments something about my E8400@4.1ghz i read somewhere in the internet..RAMs may give trouble when OC-ing if we did not manage it correctly..really need help on this i already post the screen..if got something wrong please tell me TQ i downclock the timings.before it was 5-5-5-18 to 5-5-5-15wo ur prime95.obviously there's sumthg wrong thr |
|
|
|
|
Quote
0.0272sec
0.66
6 queries
GZIP Disabled