any1 experienced any errors frm windows stating a fle is corrupted when u set a particular setting in the bios too high eg voltages

new user loging in...ep45 ud3p rev 1.1...please guide me how to oc e8400 e0..juz cant get the right vcore...not used to ggbyte bios compared to tpower..lol

tpower bios like a jungle when go in there . but i prefer UD3P bios, when whacking some insane voltage the numbers turn to red . so u r in danger

This post has been edited by gamers maniac: May 1 2009, 09:28 AM

my settings @ 520fsb



note the cpu termination @ 1.6v,tht because i set it to auto,now i set it to 1.56v.try setting it lower if u can,same goes to MCH core.

cpu reference and mch reference prefered to be put to auto.as lower or higher values will make ur comp go unstable

This post has been edited by ZeneticX: May 1 2009, 02:54 PM

any guide for this baby to oc? damn frustrating..

i'm using Ud3l...what should i set for my ram multiplier,izzit put at 2.00B o 2.00D?i'm using ddr2 800mhz..
one more ques,if i manage to boot and cant load into windows,wats should be de problem causing it? thanx..

might be vcore,might be other voltages

hi all. im using ep45-ud3l with e6750 oc to 3.2 on stock voltage. usually need how much vcore to get 3.6GHz? need to change other voltage too? need help for reference.

try increase like 0.01 and test,if u can boot into windows stress test with linX,IBT or Orthos,if u get blue screen or error means vcore not enough,go bck to bios and increase another 0.01v and test agn till u get fully stable and able to pass all test.

actually nt rly is 0.01v per increment,lets say ur at 1.26v,the next preset is 1.265 sumthg like dat,jz select the next increment

i've tried 1.475v. but fail orthos. need to change other voltage too? like vpll or termination voltage? sorry noob question. nvr use intel b4.just amd system.



This post has been edited by sharkeer: May 3 2009, 03:23 PM

1.475v ? thts vry high,i can do 4.5ghz with tht i guess are u sure u rly need THT high?

refer back to my previous ss the voltages settings i posted up.i'm using e8400 but tht will give u a rough idea what u shld set

i dunno. orthos keep failing. any suggestion?



This post has been edited by sharkeer: May 3 2009, 05:23 PM

1.424v @ 5GHz

bro show some bios setup can? lets share some settings

Smell some pwnage in future

what cpu cooler u using?

dmm envy ur e8400,mine can do 520fsb x8 @ 1.365 only,if wn go 5ghz like urs duno need pump till how high

air or waterrr??
share

wah bro..u alwiz come out with good results...me still stuck with stupid 4.05ghz with stupid ram...ur KST not even working at 450 CL4 with the performance enhance to standard...damn...wondered y??


anyway....still nid a lot of guide from these sifus in this topic to help me out..

for such high clock is it possible to use air cooling? dry ice kot